upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
611 lines
14 KiB
611 lines
14 KiB
/*
|
|
* armboot - Startup Code for ARM720 CPU-core
|
|
*
|
|
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
|
|
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/hardware.h>
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Jump vector table as in table 3.1 in [1]
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
|
|
.globl _start
|
|
_start: b reset
|
|
ldr pc, _undefined_instruction
|
|
ldr pc, _software_interrupt
|
|
ldr pc, _prefetch_abort
|
|
ldr pc, _data_abort
|
|
#ifdef CONFIG_LPC2292
|
|
.word 0xB4405F76 /* 2's complement of the checksum of the vectors */
|
|
#else
|
|
ldr pc, _not_used
|
|
#endif
|
|
ldr pc, _irq
|
|
ldr pc, _fiq
|
|
|
|
_undefined_instruction: .word undefined_instruction
|
|
_software_interrupt: .word software_interrupt
|
|
_prefetch_abort: .word prefetch_abort
|
|
_data_abort: .word data_abort
|
|
_not_used: .word not_used
|
|
_irq: .word irq
|
|
_fiq: .word fiq
|
|
|
|
.balignl 16,0xdeadbeef
|
|
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Startup Code (reset vector)
|
|
*
|
|
* do important init only if we don't start from RAM!
|
|
* relocate armboot to ram
|
|
* setup stack
|
|
* jump to second stage
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
_TEXT_BASE:
|
|
.word TEXT_BASE
|
|
|
|
.globl _armboot_start
|
|
_armboot_start:
|
|
.word _start
|
|
|
|
/*
|
|
* These are defined in the board-specific linker script.
|
|
*/
|
|
.globl _bss_start
|
|
_bss_start:
|
|
.word __bss_start
|
|
|
|
.globl _bss_end
|
|
_bss_end:
|
|
.word _end
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
/* IRQ stack memory (calculated at run-time) */
|
|
.globl IRQ_STACK_START
|
|
IRQ_STACK_START:
|
|
.word 0x0badc0de
|
|
|
|
/* IRQ stack memory (calculated at run-time) */
|
|
.globl FIQ_STACK_START
|
|
FIQ_STACK_START:
|
|
.word 0x0badc0de
|
|
#endif
|
|
|
|
|
|
/*
|
|
* the actual reset code
|
|
*/
|
|
|
|
reset:
|
|
/*
|
|
* set the cpu to SVC32 mode
|
|
*/
|
|
mrs r0,cpsr
|
|
bic r0,r0,#0x1f
|
|
orr r0,r0,#0x13
|
|
msr cpsr,r0
|
|
|
|
/*
|
|
* we do sys-critical inits only at reboot,
|
|
* not when booting from ram!
|
|
*/
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
bl cpu_init_crit
|
|
#endif
|
|
|
|
#ifdef CONFIG_LPC2292
|
|
bl lowlevel_init
|
|
#endif
|
|
|
|
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
|
|
relocate: /* relocate U-Boot to RAM */
|
|
adr r0, _start /* r0 <- current position of code */
|
|
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
|
|
cmp r0, r1 /* don't reloc during debug */
|
|
beq stack_setup
|
|
|
|
#if TEXT_BASE
|
|
#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */
|
|
ldr r2, =0x0 /* Relocate the exception vectors */
|
|
cmp r1, r2 /* and associated data to address */
|
|
ldmneia r0!, {r3-r10} /* 0x0. Do nothing if TEXT_BASE is */
|
|
stmneia r2!, {r3-r10} /* 0x0. Copy the first 15 words. */
|
|
ldmneia r0, {r3-r9}
|
|
stmneia r2, {r3-r9}
|
|
adrne r0, _start /* restore r0 */
|
|
#endif /* !CONFIG_LPC2292 */
|
|
#endif
|
|
|
|
ldr r2, _armboot_start
|
|
ldr r3, _bss_start
|
|
sub r2, r3, r2 /* r2 <- size of armboot */
|
|
add r2, r0, r2 /* r2 <- source end address */
|
|
|
|
copy_loop:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end addreee [r2] */
|
|
ble copy_loop
|
|
|
|
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
|
|
|
|
/* Set up the stack */
|
|
stack_setup:
|
|
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
|
|
sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
|
|
sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
|
|
#ifdef CONFIG_USE_IRQ
|
|
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
|
|
#endif
|
|
sub sp, r0, #12 /* leave 3 words for abort-stack */
|
|
|
|
clear_bss:
|
|
ldr r0, _bss_start /* find start of bss segment */
|
|
ldr r1, _bss_end /* stop here */
|
|
mov r2, #0x00000000 /* clear */
|
|
|
|
clbss_l:str r2, [r0] /* clear loop... */
|
|
add r0, r0, #4
|
|
cmp r0, r1
|
|
ble clbss_l
|
|
|
|
ldr pc, _start_armboot
|
|
|
|
_start_armboot: .word start_armboot
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* CPU_init_critical registers
|
|
*
|
|
* setup important registers
|
|
* setup memory timing
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
|
|
|
/* Interupt-Controller base addresses */
|
|
INTMR1: .word 0x80000280 @ 32 bit size
|
|
INTMR2: .word 0x80001280 @ 16 bit size
|
|
INTMR3: .word 0x80002280 @ 8 bit size
|
|
|
|
/* SYSCONs */
|
|
SYSCON1: .word 0x80000100
|
|
SYSCON2: .word 0x80001100
|
|
SYSCON3: .word 0x80002200
|
|
|
|
#define CLKCTL 0x6 /* mask */
|
|
#define CLKCTL_18 0x0 /* 18.432 MHz */
|
|
#define CLKCTL_36 0x2 /* 36.864 MHz */
|
|
#define CLKCTL_49 0x4 /* 49.152 MHz */
|
|
#define CLKCTL_73 0x6 /* 73.728 MHz */
|
|
|
|
#elif defined(CONFIG_LPC2292)
|
|
PLLCFG_ADR: .word PLLCFG
|
|
PLLFEED_ADR: .word PLLFEED
|
|
PLLCON_ADR: .word PLLCON
|
|
PLLSTAT_ADR: .word PLLSTAT
|
|
VPBDIV_ADR: .word VPBDIV
|
|
MEMMAP_ADR: .word MEMMAP
|
|
|
|
#endif
|
|
|
|
cpu_init_crit:
|
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
|
|
|
/*
|
|
* mask all IRQs by clearing all bits in the INTMRs
|
|
*/
|
|
mov r1, #0x00
|
|
ldr r0, INTMR1
|
|
str r1, [r0]
|
|
ldr r0, INTMR2
|
|
str r1, [r0]
|
|
ldr r0, INTMR3
|
|
str r1, [r0]
|
|
|
|
/*
|
|
* flush v4 I/D caches
|
|
*/
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
|
|
/*
|
|
* disable MMU stuff and caches
|
|
*/
|
|
mrc p15,0,r0,c1,c0
|
|
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
|
|
bic r0, r0, #0x0000008f @ clear bits 7, 3:0 (B--- WCAM)
|
|
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
|
|
mcr p15,0,r0,c1,c0
|
|
#elif defined(CONFIG_NETARM)
|
|
/*
|
|
* prior to software reset : need to set pin PORTC4 to be *HRESET
|
|
*/
|
|
ldr r0, =NETARM_GEN_MODULE_BASE
|
|
ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \
|
|
NETARM_GEN_PORT_DIR(0x10))
|
|
str r1, [r0, #+NETARM_GEN_PORTC]
|
|
/*
|
|
* software reset : see HW Ref. Guide 8.2.4 : Software Service register
|
|
* for an explanation of this process
|
|
*/
|
|
ldr r0, =NETARM_GEN_MODULE_BASE
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETA
|
|
str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETB
|
|
str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETA
|
|
str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETB
|
|
str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
/*
|
|
* setup PLL and System Config
|
|
*/
|
|
ldr r0, =NETARM_GEN_MODULE_BASE
|
|
|
|
ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \
|
|
NETARM_GEN_SYS_CFG_BUSFULL | \
|
|
NETARM_GEN_SYS_CFG_USER_EN | \
|
|
NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
|
|
NETARM_GEN_SYS_CFG_BUSARB_INT | \
|
|
NETARM_GEN_SYS_CFG_BUSMON_EN )
|
|
|
|
str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
|
|
|
|
#ifndef CONFIG_NETARM_PLL_BYPASS
|
|
ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
|
|
NETARM_GEN_PLL_CTL_POLTST_DEF | \
|
|
NETARM_GEN_PLL_CTL_INDIV(1) | \
|
|
NETARM_GEN_PLL_CTL_ICP_DEF | \
|
|
NETARM_GEN_PLL_CTL_OUTDIV(2) )
|
|
str r1, [r0, #+NETARM_GEN_PLL_CONTROL]
|
|
#endif
|
|
|
|
/*
|
|
* mask all IRQs by clearing all bits in the INTMRs
|
|
*/
|
|
mov r1, #0
|
|
ldr r0, =NETARM_GEN_MODULE_BASE
|
|
str r1, [r0, #+NETARM_GEN_INTR_ENABLE]
|
|
|
|
#elif defined(CONFIG_S3C4510B)
|
|
|
|
/*
|
|
* Mask off all IRQ sources
|
|
*/
|
|
ldr r1, =REG_INTMASK
|
|
ldr r0, =0x3FFFFF
|
|
str r0, [r1]
|
|
|
|
/*
|
|
* Disable Cache
|
|
*/
|
|
ldr r0, =REG_SYSCFG
|
|
ldr r1, =0x83ffffa0 /* cache-disabled */
|
|
str r1, [r0]
|
|
|
|
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
|
|
/* No specific initialisation for IntegratorAP/CM720T as yet */
|
|
#elif defined(CONFIG_LPC2292)
|
|
/* Set-up PLL */
|
|
mov r3, #0xAA
|
|
mov r4, #0x55
|
|
/* First disconnect and disable the PLL */
|
|
ldr r0, PLLCON_ADR
|
|
mov r1, #0x00
|
|
str r1, [r0]
|
|
ldr r0, PLLFEED_ADR /* start feed sequence */
|
|
str r3, [r0]
|
|
str r4, [r0] /* feed sequence done */
|
|
/* Set new M and P values */
|
|
ldr r0, PLLCFG_ADR
|
|
mov r1, #0x23 /* M=4 and P=2 */
|
|
str r1, [r0]
|
|
ldr r0, PLLFEED_ADR /* start feed sequence */
|
|
str r3, [r0]
|
|
str r4, [r0] /* feed sequence done */
|
|
/* Then enable the PLL */
|
|
ldr r0, PLLCON_ADR
|
|
mov r1, #0x01 /* PLL enable bit */
|
|
str r1, [r0]
|
|
ldr r0, PLLFEED_ADR /* start feed sequence */
|
|
str r3, [r0]
|
|
str r4, [r0] /* feed sequence done */
|
|
/* Wait for the lock */
|
|
ldr r0, PLLSTAT_ADR
|
|
mov r1, #0x400 /* lock bit */
|
|
lock_loop:
|
|
ldr r2, [r0]
|
|
and r2, r1, r2
|
|
cmp r2, #0
|
|
beq lock_loop
|
|
/* And finally connect the PLL */
|
|
ldr r0, PLLCON_ADR
|
|
mov r1, #0x03 /* PLL enable bit and connect bit */
|
|
str r1, [r0]
|
|
ldr r0, PLLFEED_ADR /* start feed sequence */
|
|
str r3, [r0]
|
|
str r4, [r0] /* feed sequence done */
|
|
/* Set-up VPBDIV register */
|
|
ldr r0, VPBDIV_ADR
|
|
mov r1, #0x01 /* VPB clock is same as process clock */
|
|
str r1, [r0]
|
|
#else
|
|
#error No cpu_init_crit() defined for current CPU type
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM7_REVD
|
|
/* set clock speed */
|
|
/* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */
|
|
/* !!! not doing DRAM refresh properly! */
|
|
ldr r0, SYSCON3
|
|
ldr r1, [r0]
|
|
bic r1, r1, #CLKCTL
|
|
orr r1, r1, #CLKCTL_36
|
|
str r1, [r0]
|
|
#endif
|
|
|
|
#ifndef CONFIG_LPC2292
|
|
mov ip, lr
|
|
/*
|
|
* before relocating, we have to setup RAM timing
|
|
* because memory timing is board-dependent, you will
|
|
* find a lowlevel_init.S in your board directory.
|
|
*/
|
|
bl lowlevel_init
|
|
mov lr, ip
|
|
#endif
|
|
|
|
mov pc, lr
|
|
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Interrupt handling
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
@
|
|
@ IRQ stack frame.
|
|
@
|
|
#define S_FRAME_SIZE 72
|
|
|
|
#define S_OLD_R0 68
|
|
#define S_PSR 64
|
|
#define S_PC 60
|
|
#define S_LR 56
|
|
#define S_SP 52
|
|
|
|
#define S_IP 48
|
|
#define S_FP 44
|
|
#define S_R10 40
|
|
#define S_R9 36
|
|
#define S_R8 32
|
|
#define S_R7 28
|
|
#define S_R6 24
|
|
#define S_R5 20
|
|
#define S_R4 16
|
|
#define S_R3 12
|
|
#define S_R2 8
|
|
#define S_R1 4
|
|
#define S_R0 0
|
|
|
|
#define MODE_SVC 0x13
|
|
#define I_BIT 0x80
|
|
|
|
/*
|
|
* use bad_save_user_regs for abort/prefetch/undef/swi ...
|
|
* use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
|
|
*/
|
|
|
|
.macro bad_save_user_regs
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
stmia sp, {r0 - r12} @ Calling r0-r12
|
|
add r8, sp, #S_PC
|
|
|
|
ldr r2, _armboot_start
|
|
sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
|
|
sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
|
|
ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0
|
|
add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
|
|
|
|
add r5, sp, #S_SP
|
|
mov r1, lr
|
|
stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r
|
|
mov r0, sp
|
|
.endm
|
|
|
|
.macro irq_save_user_regs
|
|
sub sp, sp, #S_FRAME_SIZE
|
|
stmia sp, {r0 - r12} @ Calling r0-r12
|
|
add r8, sp, #S_PC
|
|
stmdb r8, {sp, lr}^ @ Calling SP, LR
|
|
str lr, [r8, #0] @ Save calling PC
|
|
mrs r6, spsr
|
|
str r6, [r8, #4] @ Save CPSR
|
|
str r0, [r8, #8] @ Save OLD_R0
|
|
mov r0, sp
|
|
.endm
|
|
|
|
.macro irq_restore_user_regs
|
|
ldmia sp, {r0 - lr}^ @ Calling r0 - lr
|
|
mov r0, r0
|
|
ldr lr, [sp, #S_PC] @ Get PC
|
|
add sp, sp, #S_FRAME_SIZE
|
|
subs pc, lr, #4 @ return & move spsr_svc into cpsr
|
|
.endm
|
|
|
|
.macro get_bad_stack
|
|
ldr r13, _armboot_start @ setup our mode stack
|
|
sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
|
|
sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
|
|
|
|
str lr, [r13] @ save caller lr / spsr
|
|
mrs lr, spsr
|
|
str lr, [r13, #4]
|
|
|
|
mov r13, #MODE_SVC @ prepare SVC-Mode
|
|
msr spsr_c, r13
|
|
mov lr, pc
|
|
movs pc, lr
|
|
.endm
|
|
|
|
.macro get_irq_stack @ setup IRQ stack
|
|
ldr sp, IRQ_STACK_START
|
|
.endm
|
|
|
|
.macro get_fiq_stack @ setup FIQ stack
|
|
ldr sp, FIQ_STACK_START
|
|
.endm
|
|
|
|
/*
|
|
* exception handlers
|
|
*/
|
|
.align 5
|
|
undefined_instruction:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_undefined_instruction
|
|
|
|
.align 5
|
|
software_interrupt:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_software_interrupt
|
|
|
|
.align 5
|
|
prefetch_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_prefetch_abort
|
|
|
|
.align 5
|
|
data_abort:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_data_abort
|
|
|
|
.align 5
|
|
not_used:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_not_used
|
|
|
|
#ifdef CONFIG_USE_IRQ
|
|
|
|
.align 5
|
|
irq:
|
|
get_irq_stack
|
|
irq_save_user_regs
|
|
bl do_irq
|
|
irq_restore_user_regs
|
|
|
|
.align 5
|
|
fiq:
|
|
get_fiq_stack
|
|
/* someone ought to write a more effiction fiq_save_user_regs */
|
|
irq_save_user_regs
|
|
bl do_fiq
|
|
irq_restore_user_regs
|
|
|
|
#else
|
|
|
|
.align 5
|
|
irq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_irq
|
|
|
|
.align 5
|
|
fiq:
|
|
get_bad_stack
|
|
bad_save_user_regs
|
|
bl do_fiq
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
|
|
.align 5
|
|
.globl reset_cpu
|
|
reset_cpu:
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
|
|
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
|
|
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
|
|
bic ip, ip, #0x000f @ ............wcam
|
|
bic ip, ip, #0x2100 @ ..v....s........
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
#elif defined(CONFIG_NETARM)
|
|
.align 5
|
|
.globl reset_cpu
|
|
reset_cpu:
|
|
ldr r1, =NETARM_MEM_MODULE_BASE
|
|
ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
|
|
ldr r1, =0xFFFFF000
|
|
and r0, r1, r0
|
|
ldr r1, =(relocate-TEXT_BASE)
|
|
add r0, r1, r0
|
|
ldr r4, =NETARM_GEN_MODULE_BASE
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETA
|
|
str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETB
|
|
str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETA
|
|
str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
ldr r1, =NETARM_GEN_SW_SVC_RESETB
|
|
str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
|
|
mov pc, r0
|
|
#elif defined(CONFIG_S3C4510B)
|
|
/* Nothing done here as reseting the CPU is board specific, depending
|
|
* on external peripherals such as watchdog timers, etc. */
|
|
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
|
|
/* No specific reset actions for IntegratorAP/CM720T as yet */
|
|
#elif defined(CONFIG_LPC2292)
|
|
.align 5
|
|
.globl reset_cpu
|
|
reset_cpu:
|
|
mov pc, r0
|
|
#else
|
|
#error No reset_cpu() defined for current CPU type
|
|
#endif
|
|
|