upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/qi/qi_lb60/qi_lb60.c

104 lines
2.1 KiB

/*
* Authors: Xiangfu Liu <xiangfu@sharism.cc>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 3 of the License, or (at your option) any later version.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
DECLARE_GLOBAL_DATA_PTR;
static void gpio_init(void)
{
unsigned int i;
/* Initialize NAND Flash Pins */
__gpio_as_nand();
/* Initialize SDRAM pins */
__gpio_as_sdram_16bit_4720();
/* Initialize LCD pins */
__gpio_as_lcd_18bit();
/* Initialize MSC pins */
__gpio_as_msc();
/* Initialize Other pins */
for (i = 0; i < 7; i++) {
__gpio_as_input(GPIO_KEYIN_BASE + i);
__gpio_enable_pull(GPIO_KEYIN_BASE + i);
}
for (i = 0; i < 8; i++) {
__gpio_as_output(GPIO_KEYOUT_BASE + i);
__gpio_clear_pin(GPIO_KEYOUT_BASE + i);
}
__gpio_as_input(GPIO_KEYIN_8);
__gpio_enable_pull(GPIO_KEYIN_8);
/* enable the TP4, TP5 as UART0 */
__gpio_jtag_to_uart0();
__gpio_as_output(GPIO_AUDIO_POP);
__gpio_set_pin(GPIO_AUDIO_POP);
__gpio_as_output(GPIO_LCD_CS);
__gpio_clear_pin(GPIO_LCD_CS);
__gpio_as_output(GPIO_AMP_EN);
__gpio_clear_pin(GPIO_AMP_EN);
__gpio_as_output(GPIO_SDPW_EN);
__gpio_disable_pull(GPIO_SDPW_EN);
__gpio_clear_pin(GPIO_SDPW_EN);
__gpio_as_input(GPIO_SD_DETECT);
__gpio_disable_pull(GPIO_SD_DETECT);
__gpio_as_input(GPIO_USB_DETECT);
__gpio_enable_pull(GPIO_USB_DETECT);
}
static void cpm_init(void)
{
struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
uint32_t reg = readw(&cpm->clkgr);
reg |= CPM_CLKGR_IPU |
CPM_CLKGR_CIM |
CPM_CLKGR_I2C |
CPM_CLKGR_SSI |
CPM_CLKGR_UART1 |
CPM_CLKGR_SADC |
CPM_CLKGR_UHC |
CPM_CLKGR_UDC |
CPM_CLKGR_AIC1;
writew(reg, &cpm->clkgr);
}
int board_early_init_f(void)
{
gpio_init();
cpm_init();
calc_clocks(); /* calc the clocks */
rtc_init(); /* init rtc on any reset */
return 0;
}
/* U-Boot common routines */
int checkboard(void)
{
printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n",
gd->cpu_clk / 1000000);
return 0;
}