upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/st/nhk8815/nhk8815.c

108 lines
2.7 KiB

/*
* (C) Copyright 2005
* STMicrolelctronics, <www.st.com>
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SHOW_BOOT_PROGRESS
void show_boot_progress(int progress)
{
printf("%i\n", progress);
}
#endif
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
gd->bd->bi_boot_params = 0x00000100;
writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
writel(0x0000305b, REG_FSMC_BCR1);
writel(0x00033f33, REG_FSMC_BTR1);
/* Set up SMCS0 for OneNand: sram-like once again */
writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */
writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */
icache_enable();
return 0;
}
int board_late_init(void)
{
/* Set the two I2C gpio lines to be gpio high */
nmk_gpio_set(__SCL, 1); nmk_gpio_set(__SDA, 1);
nmk_gpio_dir(__SCL, 1); nmk_gpio_dir(__SDA, 1);
nmk_gpio_af(__SCL, GPIO_GPIO); nmk_gpio_af(__SDA, GPIO_GPIO);
/* Reset the I2C port expander, on GPIO77 */
nmk_gpio_af(77, GPIO_GPIO);
nmk_gpio_dir(77, 1);
nmk_gpio_set(77, 0);
udelay(10);
nmk_gpio_set(77, 1);
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC91111
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
return rc;
}
#endif