upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
122 lines
3.9 KiB
122 lines
3.9 KiB
/*
|
|
* UniPhier SG (SoC Glue) block registers
|
|
*
|
|
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef ARCH_SG_REGS_H
|
|
#define ARCH_SG_REGS_H
|
|
|
|
/* Base Address */
|
|
#define SG_CTRL_BASE 0x5f800000
|
|
#define SG_DBG_BASE 0x5f900000
|
|
|
|
/* Revision */
|
|
#define SG_REVISION (SG_CTRL_BASE | 0x0000)
|
|
#define SG_REVISION_TYPE_SHIFT 16
|
|
#define SG_REVISION_TYPE_MASK (0xff << SG_REVISION_TYPE_SHIFT)
|
|
#define SG_REVISION_MODEL_SHIFT 8
|
|
#define SG_REVISION_MODEL_MASK (0x3 << SG_REVISION_MODEL_SHIFT)
|
|
#define SG_REVISION_REV_SHIFT 0
|
|
#define SG_REVISION_REV_MASK (0x1f << SG_REVISION_REV_SHIFT)
|
|
|
|
/* Memory Configuration */
|
|
#define SG_MEMCONF (SG_CTRL_BASE | 0x0400)
|
|
|
|
#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0))
|
|
#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0))
|
|
#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0))
|
|
#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0))
|
|
#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0))
|
|
#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8)
|
|
#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8)
|
|
|
|
#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2))
|
|
#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2))
|
|
#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2))
|
|
#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2))
|
|
#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2))
|
|
#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9)
|
|
#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9)
|
|
|
|
#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16))
|
|
#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16))
|
|
#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16))
|
|
#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16))
|
|
#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24)
|
|
#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24)
|
|
|
|
#define SG_MEMCONF_SPARSEMEM (0x1 << 4)
|
|
|
|
/* Pin Control */
|
|
#define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000)
|
|
|
|
#if defined(CONFIG_MACH_PH1_PRO4)
|
|
# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8)
|
|
#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \
|
|
defined(CONFIG_MACH_PH1_SLD8)
|
|
# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4)
|
|
#endif
|
|
|
|
#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4)
|
|
#define SG_PINSELBITS 4
|
|
#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
|
|
#define SG_PINSELBITS 8
|
|
#endif
|
|
|
|
#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32))
|
|
#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \
|
|
((n) * (SG_PINSELBITS) % 32)))
|
|
#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32))
|
|
|
|
/* Only for PH1-Pro4 */
|
|
#define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700)
|
|
|
|
/* Input Enable */
|
|
#define SG_IECTRL (SG_CTRL_BASE | 0x1d00)
|
|
|
|
/* Pin Monitor */
|
|
#define SG_PINMON0 (SG_DBG_BASE | 0x0100)
|
|
|
|
#define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19)
|
|
#define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19)
|
|
#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19)
|
|
#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19)
|
|
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16)
|
|
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16)
|
|
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16)
|
|
|
|
#ifdef __ASSEMBLY__
|
|
|
|
.macro set_pinsel, n, value, ra, rd
|
|
ldr \ra, =SG_PINSEL_ADDR(\n)
|
|
ldr \rd, [\ra]
|
|
and \rd, \rd, #SG_PINSEL_MASK(\n)
|
|
orr \rd, \rd, #SG_PINSEL_MODE(\n, \value)
|
|
str \rd, [\ra]
|
|
.endm
|
|
|
|
#else
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/io.h>
|
|
|
|
static inline void sg_set_pinsel(int n, int value)
|
|
{
|
|
writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n))
|
|
| SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n));
|
|
}
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
#endif /* ARCH_SG_REGS_H */
|
|
|