upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
189 lines
4.1 KiB
189 lines
4.1 KiB
/*
|
|
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/io.h>
|
|
#include <mach/sc-regs.h>
|
|
#include <mach/sg-regs.h>
|
|
|
|
#undef DPLL_SSC_RATE_1PER
|
|
|
|
static void dpll_init(void)
|
|
{
|
|
u32 tmp;
|
|
|
|
/*
|
|
* Set Frequency
|
|
* Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
|
|
* to FOUT (DPLLCTRL.bit[29:20])
|
|
*/
|
|
tmp = readl(SC_DPLLCTRL);
|
|
tmp &= ~0x000f0000;
|
|
#if CONFIG_DDR_FREQ == 1600
|
|
tmp |= 0x000c0000;
|
|
#elif CONFIG_DDR_FREQ == 1333
|
|
tmp |= 0x000d0000;
|
|
#else
|
|
# error "Unknown frequency"
|
|
#endif
|
|
|
|
#if defined(DPLL_SSC_RATE_1PER)
|
|
tmp &= ~SC_DPLLCTRL_SSC_RATE;
|
|
#else
|
|
tmp |= SC_DPLLCTRL_SSC_RATE;
|
|
#endif
|
|
writel(tmp, SC_DPLLCTRL);
|
|
|
|
tmp = readl(SC_DPLLCTRL2);
|
|
tmp |= SC_DPLLCTRL2_NRSTDS;
|
|
writel(tmp, SC_DPLLCTRL2);
|
|
}
|
|
|
|
static void upll_init(void)
|
|
{
|
|
u32 tmp, clk_mode_upll, clk_mode_axosel;
|
|
|
|
tmp = readl(SG_PINMON0);
|
|
clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
|
|
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
|
|
|
|
/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
|
|
tmp = readl(SC_UPLLCTRL);
|
|
tmp &= ~0x18000000;
|
|
writel(tmp, SC_UPLLCTRL);
|
|
|
|
if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
|
|
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
|
|
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
|
|
/* AXO: 25MHz */
|
|
tmp &= ~0x07ffffff;
|
|
tmp |= 0x0228f5c0;
|
|
} else {
|
|
/* AXO: default 24.576MHz */
|
|
tmp &= ~0x07ffffff;
|
|
tmp |= 0x02328000;
|
|
}
|
|
}
|
|
|
|
writel(tmp, SC_UPLLCTRL);
|
|
|
|
/* set 1 to K_LD(UPLLCTRL.bit[27]) */
|
|
tmp |= 0x08000000;
|
|
writel(tmp, SC_UPLLCTRL);
|
|
|
|
/* wait 10 usec */
|
|
udelay(10);
|
|
|
|
/* set 1 to SNRT(UPLLCTRL.bit[28]) */
|
|
tmp |= 0x10000000;
|
|
writel(tmp, SC_UPLLCTRL);
|
|
}
|
|
|
|
static void vpll_init(void)
|
|
{
|
|
u32 tmp, clk_mode_axosel;
|
|
|
|
tmp = readl(SG_PINMON0);
|
|
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
|
|
|
|
/* set 1 to VPLA27WP and VPLA27WP */
|
|
tmp = readl(SC_VPLL27ACTRL);
|
|
tmp |= 0x00000001;
|
|
writel(tmp, SC_VPLL27ACTRL);
|
|
tmp = readl(SC_VPLL27BCTRL);
|
|
tmp |= 0x00000001;
|
|
writel(tmp, SC_VPLL27BCTRL);
|
|
|
|
/* Set 0 to VPLA_K_LD and VPLB_K_LD */
|
|
tmp = readl(SC_VPLL27ACTRL3);
|
|
tmp &= ~0x10000000;
|
|
writel(tmp, SC_VPLL27ACTRL3);
|
|
tmp = readl(SC_VPLL27BCTRL3);
|
|
tmp &= ~0x10000000;
|
|
writel(tmp, SC_VPLL27BCTRL3);
|
|
|
|
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
|
|
tmp = readl(SC_VPLL27ACTRL2);
|
|
tmp &= ~0x10000000;
|
|
writel(tmp, SC_VPLL27ACTRL2);
|
|
tmp = readl(SC_VPLL27BCTRL2);
|
|
tmp &= ~0x10000000;
|
|
writel(tmp, SC_VPLL27BCTRL2);
|
|
|
|
/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
|
|
tmp = readl(SC_VPLL27ACTRL2);
|
|
tmp &= ~0x0000007f;
|
|
tmp |= 0x00000020;
|
|
writel(tmp, SC_VPLL27ACTRL2);
|
|
tmp = readl(SC_VPLL27BCTRL2);
|
|
tmp &= ~0x0000007f;
|
|
tmp |= 0x00000020;
|
|
writel(tmp, SC_VPLL27BCTRL2);
|
|
|
|
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
|
|
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
|
|
/* AXO: 25MHz */
|
|
tmp = readl(SC_VPLL27ACTRL3);
|
|
tmp &= ~0x000fffff;
|
|
tmp |= 0x00066664;
|
|
writel(tmp, SC_VPLL27ACTRL3);
|
|
tmp = readl(SC_VPLL27BCTRL3);
|
|
tmp &= ~0x000fffff;
|
|
tmp |= 0x00066664;
|
|
writel(tmp, SC_VPLL27BCTRL3);
|
|
} else {
|
|
/* AXO: default 24.576MHz */
|
|
tmp = readl(SC_VPLL27ACTRL3);
|
|
tmp &= ~0x000fffff;
|
|
tmp |= 0x000f5800;
|
|
writel(tmp, SC_VPLL27ACTRL3);
|
|
tmp = readl(SC_VPLL27BCTRL3);
|
|
tmp &= ~0x000fffff;
|
|
tmp |= 0x000f5800;
|
|
writel(tmp, SC_VPLL27BCTRL3);
|
|
}
|
|
|
|
/* Set 1 to VPLA_K_LD and VPLB_K_LD */
|
|
tmp = readl(SC_VPLL27ACTRL3);
|
|
tmp |= 0x10000000;
|
|
writel(tmp, SC_VPLL27ACTRL3);
|
|
tmp = readl(SC_VPLL27BCTRL3);
|
|
tmp |= 0x10000000;
|
|
writel(tmp, SC_VPLL27BCTRL3);
|
|
|
|
/* wait 10 usec */
|
|
udelay(10);
|
|
|
|
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
|
|
tmp = readl(SC_VPLL27ACTRL2);
|
|
tmp |= 0x10000000;
|
|
writel(tmp, SC_VPLL27ACTRL2);
|
|
tmp = readl(SC_VPLL27BCTRL2);
|
|
tmp |= 0x10000000;
|
|
writel(tmp, SC_VPLL27BCTRL2);
|
|
|
|
/* set 0 to VPLA27WP and VPLA27WP */
|
|
tmp = readl(SC_VPLL27ACTRL);
|
|
tmp &= ~0x00000001;
|
|
writel(tmp, SC_VPLL27ACTRL);
|
|
tmp = readl(SC_VPLL27BCTRL);
|
|
tmp |= ~0x00000001;
|
|
writel(tmp, SC_VPLL27BCTRL);
|
|
}
|
|
|
|
void pll_init(void)
|
|
{
|
|
dpll_init();
|
|
upll_init();
|
|
vpll_init();
|
|
|
|
/*
|
|
* Wait 500 usec until dpll get stable
|
|
* We wait 10 usec in upll_init() and vpll_init()
|
|
* so 20 usec can be saved here.
|
|
*/
|
|
udelay(480);
|
|
}
|
|
|