upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
396 lines
12 KiB
396 lines
12 KiB
/*
|
|
* Configuation settings for the Freescale MCF54455 EVB board.
|
|
*
|
|
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef _M54455EVB_H
|
|
#define _M54455EVB_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_MCF5445x /* define processor family */
|
|
#define CONFIG_M54455 /* define processor type */
|
|
#define CONFIG_M54455EVB /* M54455EVB board */
|
|
|
|
#define CONFIG_MCFUART
|
|
#define CFG_UART_PORT (0)
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
|
|
|
|
#undef CONFIG_WATCHDOG
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/* Command line configuration */
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BOOTD
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_MISC
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NET
|
|
#undef CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_REGINFO
|
|
|
|
#undef CONFIG_CMD_LOADB
|
|
#undef CONFIG_CMD_LOADS
|
|
|
|
/* Network configuration */
|
|
#define CONFIG_MCFFEC
|
|
#ifdef CONFIG_MCFFEC
|
|
# define CONFIG_NET_MULTI 1
|
|
# define CONFIG_MII 1
|
|
# define CONFIG_CF_DOMII
|
|
# define CFG_DISCOVER_PHY
|
|
# define CFG_RX_ETH_BUFFER 8
|
|
# define CFG_FAULT_ECHO_LINK_DOWN
|
|
|
|
# define CFG_FEC0_PINMUX 0
|
|
# define CFG_FEC1_PINMUX 0
|
|
# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
|
|
# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE
|
|
# define MCFFEC_TOUT_LOOP 50000
|
|
# define CONFIG_HAS_ETH1
|
|
|
|
# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
|
|
# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
|
|
# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
|
|
# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
|
|
# define CONFIG_ETHPRIME "FEC0"
|
|
# define CONFIG_IPADDR 192.162.1.2
|
|
# define CONFIG_NETMASK 255.255.255.0
|
|
# define CONFIG_SERVERIP 192.162.1.1
|
|
# define CONFIG_GATEWAYIP 192.162.1.1
|
|
# define CONFIG_OVERWRITE_ETHADDR_ONCE
|
|
|
|
/* If CFG_DISCOVER_PHY is not defined - hardcoded */
|
|
# ifndef CFG_DISCOVER_PHY
|
|
# define FECDUPLEX FULL
|
|
# define FECSPEED _100BASET
|
|
# else
|
|
# ifndef CFG_FAULT_ECHO_LINK_DOWN
|
|
# define CFG_FAULT_ECHO_LINK_DOWN
|
|
# endif
|
|
# endif /* CFG_DISCOVER_PHY */
|
|
#endif
|
|
|
|
#define CONFIG_HOSTNAME M54455EVB
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \
|
|
"loadaddr=40010000\0" \
|
|
"u-boot=u-boot.bin\0" \
|
|
"load=tftp ${loadaddr) ${u-boot}\0" \
|
|
"upd=run load; run prog\0" \
|
|
"prog=prot off 4000000 402ffff;" \
|
|
"era 4000000 402ffff;" \
|
|
"cp.b ${loadaddr} 0 ${filesize};" \
|
|
"save\0" \
|
|
""
|
|
|
|
/* ATA configuration */
|
|
#define CONFIG_ISO_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_IDE_RESET 1
|
|
#define CONFIG_IDE_PREINIT 1
|
|
#define CONFIG_ATAPI
|
|
#undef CONFIG_LBA48
|
|
|
|
#define CFG_IDE_MAXBUS 1
|
|
#define CFG_IDE_MAXDEVICE 2
|
|
|
|
#define CFG_ATA_BASE_ADDR 0x90000000
|
|
#define CFG_ATA_IDE0_OFFSET 0
|
|
|
|
#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
|
|
#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
|
|
#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
|
|
#define CFG_ATA_STRIDE 4 /* Interval between registers */
|
|
#define _IO_BASE 0
|
|
|
|
/* Realtime clock */
|
|
#define CONFIG_MCFRTC
|
|
#undef RTC_DEBUG
|
|
#define CFG_RTC_OSCILLATOR (32 * CFG_HZ)
|
|
|
|
/* Timer */
|
|
#define CONFIG_MCFTMR
|
|
#undef CONFIG_MCFPIT
|
|
|
|
/* I2c */
|
|
#define CONFIG_FSL_I2C
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
#define CFG_I2C_OFFSET 0x58000
|
|
#define CFG_IMMR CFG_MBAR
|
|
|
|
/* PCI */
|
|
#ifdef CONFIG_CMD_PCI
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_SKIPPCI_HOSTBRIDGE
|
|
|
|
#define CFG_PCI_CACHE_LINE_SIZE 4
|
|
|
|
#define CFG_PCI_MEM_BUS 0xA0000000
|
|
#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS
|
|
#define CFG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CFG_PCI_IO_BUS 0xB1000000
|
|
#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS
|
|
#define CFG_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CFG_PCI_CFG_BUS 0xB0000000
|
|
#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
|
|
#define CFG_PCI_CFG_SIZE 0x01000000
|
|
#endif
|
|
|
|
/* FPGA - Spartan 2 */
|
|
/* experiment
|
|
#define CONFIG_FPGA CFG_SPARTAN3
|
|
#define CONFIG_FPGA_COUNT 1
|
|
#define CFG_FPGA_PROG_FEEDBACK
|
|
#define CFG_FPGA_CHECK_CTRLC
|
|
*/
|
|
|
|
/* Input, PCI, Flexbus, and VCO */
|
|
#define CONFIG_EXTRA_CLOCK
|
|
|
|
#define CONFIG_PRAM 512 /* 512 KB */
|
|
|
|
#define CFG_PROMPT "-> "
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000)
|
|
|
|
#define CFG_HZ 1000
|
|
|
|
#define CFG_MBAR 0xFC000000
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CFG_INIT_RAM_ADDR 0x80000000
|
|
#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */
|
|
#define CFG_INIT_RAM_CTRL 0x221
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x40000000
|
|
#define CFG_SDRAM_BASE1 0x48000000
|
|
#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */
|
|
#define CFG_SDRAM_CFG1 0x65311610
|
|
#define CFG_SDRAM_CFG2 0x59670000
|
|
#define CFG_SDRAM_CTRL 0xEA0B2000
|
|
#define CFG_SDRAM_EMOD 0x40010000
|
|
#define CFG_SDRAM_MODE 0x00010033
|
|
|
|
#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
|
|
#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
|
|
|
|
#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
|
|
#define CFG_BOOTPARAMS_LEN 64*1024
|
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization ??
|
|
*/
|
|
/* Initial Memory map for Linux */
|
|
#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
|
|
|
|
/* Configuration for environment
|
|
* Environment is embedded in u-boot in the second sector of the flash
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
#undef CFG_ENV_IS_EMBEDDED
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#ifdef CFG_ATMEL_BOOT
|
|
# define CFG_FLASH_BASE CFG_CS0_BASE
|
|
# define CFG_FLASH0_BASE CFG_CS0_BASE
|
|
# define CFG_FLASH1_BASE CFG_CS1_BASE
|
|
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
|
|
# define CFG_ENV_SECT_SIZE 0x2000
|
|
#else
|
|
# define CFG_FLASH_BASE CFG_CS0_BASE
|
|
# define CFG_FLASH0_BASE CFG_CS0_BASE
|
|
# define CFG_FLASH1_BASE CFG_CS1_BASE
|
|
# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
|
|
# define CFG_ENV_SECT_SIZE 0x20000
|
|
#endif
|
|
|
|
/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
|
|
keep reset. */
|
|
#undef CFG_FLASH_CFI
|
|
#ifdef CFG_FLASH_CFI
|
|
|
|
# define CFG_FLASH_CFI_DRIVER 1
|
|
# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */
|
|
# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
|
|
# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
|
|
# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
|
|
# define CFG_FLASH_CHECKSUM
|
|
# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE }
|
|
|
|
#else
|
|
|
|
# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
|
|
# define CFG_ATMEL_REGION 4
|
|
# define CFG_ATMEL_TOTALSECT 11
|
|
# define CFG_ATMEL_SECT {1, 2, 1, 7}
|
|
# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
|
|
# define CFG_INTEL_SECT 137
|
|
|
|
/* max number of sectors on one chip */
|
|
# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT)
|
|
# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */
|
|
# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
|
# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
|
|
# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */
|
|
# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
|
|
# define CFG_FLASH_CHECKSUM
|
|
|
|
#endif
|
|
|
|
/*
|
|
* This is setting for JFFS2 support in u-boot.
|
|
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
|
|
*/
|
|
#ifdef CFG_ATMEL_BOOT
|
|
# define CONFIG_JFFS2_DEV "nor1"
|
|
# define CONFIG_JFFS2_PART_SIZE 0x01000000
|
|
# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000)
|
|
#else
|
|
# define CONFIG_JFFS2_DEV "nor0"
|
|
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
|
|
# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_CACHELINE_SIZE 16
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory bank definitions
|
|
*/
|
|
/*
|
|
* CS0 - NOR Flash 1, 2, 4, or 8MB
|
|
* CS1 - CompactFlash and registers
|
|
* CS2 - CPLD
|
|
* CS3 - FPGA
|
|
* CS4 - Available
|
|
* CS5 - Available
|
|
*/
|
|
|
|
#ifdef CFG_ATMEL_BOOT
|
|
/* Atmel Flash */
|
|
#define CFG_CS0_BASE 0x04000000
|
|
#define CFG_CS0_MASK 0x00070001
|
|
#define CFG_CS0_CTRL 0x00001140
|
|
/* Intel Flash */
|
|
#define CFG_CS1_BASE 0x00000000
|
|
#define CFG_CS1_MASK 0x01FF0001
|
|
#define CFG_CS1_CTRL 0x00000D60
|
|
|
|
#define CFG_ATMEL_BASE CFG_CS0_BASE
|
|
#else
|
|
/* Intel Flash */
|
|
#define CFG_CS0_BASE 0x00000000
|
|
#define CFG_CS0_MASK 0x01FF0001
|
|
#define CFG_CS0_CTRL 0x00000D60
|
|
/* Atmel Flash */
|
|
#define CFG_CS1_BASE 0x04000000
|
|
#define CFG_CS1_MASK 0x00070001
|
|
#define CFG_CS1_CTRL 0x00001140
|
|
|
|
#define CFG_ATMEL_BASE CFG_CS1_BASE
|
|
#endif
|
|
|
|
/* CPLD */
|
|
#define CFG_CS2_BASE 0x08000000
|
|
#define CFG_CS2_MASK 0x00070001
|
|
#define CFG_CS2_CTRL 0x003f1140
|
|
|
|
/* FPGA */
|
|
#define CFG_CS3_BASE 0x09000000
|
|
#define CFG_CS3_MASK 0x00070001
|
|
#define CFG_CS3_CTRL 0x00000020
|
|
|
|
#endif /* _M54455EVB_H */
|
|
|