upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
270 lines
6.4 KiB
270 lines
6.4 KiB
/*
|
|
* SAMSUNG EXYNOS USB HOST EHCI Controller
|
|
*
|
|
* Copyright (C) 2012 Samsung Electronics Co.Ltd
|
|
* Vivek Gautam <gautam.vivek@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <libfdt.h>
|
|
#include <malloc.h>
|
|
#include <usb.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/ehci.h>
|
|
#include <asm/arch/system.h>
|
|
#include <asm/arch/power.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm-generic/errno.h>
|
|
#include <linux/compat.h>
|
|
#include "ehci.h"
|
|
|
|
/* Declare global data pointer */
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/**
|
|
* Contains pointers to register base addresses
|
|
* for the usb controller.
|
|
*/
|
|
struct exynos_ehci {
|
|
struct exynos_usb_phy *usb;
|
|
struct ehci_hccr *hcd;
|
|
struct fdt_gpio_state vbus_gpio;
|
|
};
|
|
|
|
static struct exynos_ehci exynos;
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
|
|
{
|
|
fdt_addr_t addr;
|
|
unsigned int node;
|
|
int depth;
|
|
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
|
|
if (node <= 0) {
|
|
debug("EHCI: Can't get device node for ehci\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Get the base address for EHCI controller from the device node
|
|
*/
|
|
addr = fdtdec_get_addr(blob, node, "reg");
|
|
if (addr == FDT_ADDR_T_NONE) {
|
|
debug("Can't get the EHCI register address\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
exynos->hcd = (struct ehci_hccr *)addr;
|
|
|
|
/* Vbus gpio */
|
|
fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio);
|
|
|
|
depth = 0;
|
|
node = fdtdec_next_compatible_subnode(blob, node,
|
|
COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
|
|
if (node <= 0) {
|
|
debug("EHCI: Can't get device node for usb-phy controller\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Get the base address for usbphy from the device node
|
|
*/
|
|
exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
|
|
"reg");
|
|
if (exynos->usb == NULL) {
|
|
debug("Can't get the usbphy register address\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
|
|
{
|
|
u32 hsic_ctrl;
|
|
|
|
clrbits_le32(&usb->usbphyctrl0,
|
|
HOST_CTRL0_FSEL_MASK |
|
|
HOST_CTRL0_COMMONON_N |
|
|
/* HOST Phy setting */
|
|
HOST_CTRL0_PHYSWRST |
|
|
HOST_CTRL0_PHYSWRSTALL |
|
|
HOST_CTRL0_SIDDQ |
|
|
HOST_CTRL0_FORCESUSPEND |
|
|
HOST_CTRL0_FORCESLEEP);
|
|
|
|
setbits_le32(&usb->usbphyctrl0,
|
|
/* Setting up the ref freq */
|
|
(CLK_24MHZ << 16) |
|
|
/* HOST Phy setting */
|
|
HOST_CTRL0_LINKSWRST |
|
|
HOST_CTRL0_UTMISWRST);
|
|
udelay(10);
|
|
clrbits_le32(&usb->usbphyctrl0,
|
|
HOST_CTRL0_LINKSWRST |
|
|
HOST_CTRL0_UTMISWRST);
|
|
|
|
/* HSIC Phy Setting */
|
|
hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
|
|
HSIC_CTRL_FORCESLEEP |
|
|
HSIC_CTRL_SIDDQ);
|
|
|
|
clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
|
|
clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
|
|
|
|
hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
|
|
<< HSIC_CTRL_REFCLKDIV_SHIFT)
|
|
| ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
|
|
<< HSIC_CTRL_REFCLKSEL_SHIFT)
|
|
| HSIC_CTRL_UTMISWRST);
|
|
|
|
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
|
|
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
|
|
|
|
udelay(10);
|
|
|
|
clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
|
|
HSIC_CTRL_UTMISWRST);
|
|
|
|
clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
|
|
HSIC_CTRL_UTMISWRST);
|
|
|
|
udelay(20);
|
|
|
|
/* EHCI Ctrl setting */
|
|
setbits_le32(&usb->ehcictrl,
|
|
EHCICTRL_ENAINCRXALIGN |
|
|
EHCICTRL_ENAINCR4 |
|
|
EHCICTRL_ENAINCR8 |
|
|
EHCICTRL_ENAINCR16);
|
|
}
|
|
|
|
static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
|
|
{
|
|
writel(CLK_24MHZ, &usb->usbphyclk);
|
|
|
|
clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
|
|
PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
|
|
PHYPWR_NORMAL_MASK_PHY0));
|
|
|
|
setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
|
|
udelay(10);
|
|
clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
|
|
}
|
|
|
|
static void setup_usb_phy(struct exynos_usb_phy *usb)
|
|
{
|
|
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
|
|
|
|
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
|
|
|
|
if (cpu_is_exynos5())
|
|
exynos5_setup_usb_phy(usb);
|
|
else if (cpu_is_exynos4())
|
|
if (proid_is_exynos4412())
|
|
exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)
|
|
usb);
|
|
}
|
|
|
|
static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
|
|
{
|
|
u32 hsic_ctrl;
|
|
|
|
/* HOST_PHY reset */
|
|
setbits_le32(&usb->usbphyctrl0,
|
|
HOST_CTRL0_PHYSWRST |
|
|
HOST_CTRL0_PHYSWRSTALL |
|
|
HOST_CTRL0_SIDDQ |
|
|
HOST_CTRL0_FORCESUSPEND |
|
|
HOST_CTRL0_FORCESLEEP);
|
|
|
|
/* HSIC Phy reset */
|
|
hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
|
|
HSIC_CTRL_FORCESLEEP |
|
|
HSIC_CTRL_SIDDQ |
|
|
HSIC_CTRL_PHYSWRST);
|
|
|
|
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
|
|
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
|
|
}
|
|
|
|
static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
|
|
{
|
|
setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
|
|
PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
|
|
PHYPWR_NORMAL_MASK_PHY0));
|
|
}
|
|
|
|
/* Reset the EHCI host controller. */
|
|
static void reset_usb_phy(struct exynos_usb_phy *usb)
|
|
{
|
|
if (cpu_is_exynos5())
|
|
exynos5_reset_usb_phy(usb);
|
|
else if (cpu_is_exynos4())
|
|
if (proid_is_exynos4412())
|
|
exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)
|
|
usb);
|
|
|
|
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
|
|
}
|
|
|
|
/*
|
|
* EHCI-initialization
|
|
* Create the appropriate control structures to manage
|
|
* a new EHCI host controller.
|
|
*/
|
|
int ehci_hcd_init(int index, enum usb_init_type init,
|
|
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
|
{
|
|
struct exynos_ehci *ctx = &exynos;
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
|
|
debug("Unable to parse device tree for ehci-exynos\n");
|
|
return -ENODEV;
|
|
}
|
|
#else
|
|
ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
|
|
ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
/* setup the Vbus gpio here */
|
|
if (fdt_gpio_isvalid(&ctx->vbus_gpio) &&
|
|
!fdtdec_setup_gpio(&ctx->vbus_gpio))
|
|
gpio_direction_output(ctx->vbus_gpio.gpio, 1);
|
|
#endif
|
|
|
|
setup_usb_phy(ctx->usb);
|
|
|
|
board_usb_init(index, init);
|
|
|
|
*hccr = ctx->hcd;
|
|
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
|
|
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
|
|
debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
|
|
(uint32_t)*hccr, (uint32_t)*hcor,
|
|
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Destroy the appropriate control structures corresponding
|
|
* the EHCI host controller.
|
|
*/
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
struct exynos_ehci *ctx = &exynos;
|
|
|
|
reset_usb_phy(ctx->usb);
|
|
|
|
return 0;
|
|
}
|
|
|