upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1.5 KiB
1.5 KiB
JFFS2 options and usage.
-----------------------
JFFS2 in U-Boot is a read only implementation of the file system in
Linux with the same name. To use JFFS2 define CONFIG_CMD_JFFS2.
The module adds three new commands.
fsload - load binary file from a file system image
fsinfo - print information about file systems
ls - list files in a directory
chpart - change active partition
If you do now need the commands, you can enable the filesystem separately
with CONFIG_FS_JFFS2 and call the jffs2 functions yourself.
If you boot from a partition which is mounted writable, and you
update your boot environment by replacing single files on that
partition, you should also define CONFIG_SYS_JFFS2_SORT_FRAGMENTS. Scanning
the JFFS2 filesystem takes *much* longer with this feature, though.
Sorting is done while inserting into the fragment list, which is
more or less a bubble sort. That algorithm is known to be O(n^2),
thus you should really consider if you can avoid it!
There only one way for JFFS2 to find the disk. It uses the flash_info
structure to find the start of a JFFS2 disk (called partition in the code)
and you can change where the partition is with two defines.
CONFIG_SYS_JFFS2_FIRST_BANK
defined the first flash bank to use
CONFIG_SYS_JFFS2_FIRST_SECTOR
defines the first sector to use
---
TODO.
Remove the assumption that JFFS can dereference a pointer
into the disk. The current code do not work with memory holes
or hardware with a sliding window (PCMCIA).