upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/blackfin/jtag-console.c

125 lines
2.8 KiB

/*
* jtag-console.c - console driver over Blackfin JTAG
*
* Copyright (c) 2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <devices.h>
#include <asm/blackfin.h>
#ifndef CONFIG_JTAG_CONSOLE_TIMEOUT
# define CONFIG_JTAG_CONSOLE_TIMEOUT 100
#endif
/* The Blackfin tends to be much much faster than the JTAG hardware. */
static void jtag_write_emudat(uint32_t emudat)
{
static bool overflowed = false;
ulong timeout = get_timer(0) + CONFIG_JTAG_CONSOLE_TIMEOUT;
while (bfin_read_DBGSTAT() & 0x1) {
if (overflowed)
return;
if (timeout < get_timer(0))
overflowed = true;
}
overflowed = false;
__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
}
/* Transmit a buffer. The format is:
* [32bit length][actual data]
*/
static void jtag_send(const char *c, uint32_t len)
{
uint32_t i;
if (len == 0)
return;
/* First send the length */
jtag_write_emudat(len);
/* Then send the data */
for (i = 0; i < len; i += 4)
jtag_write_emudat((c[i] << 0) | (c[i+1] << 8) | (c[i+2] << 16) | (c[i+3] << 24));
}
static void jtag_putc(const char c)
{
jtag_send(&c, 1);
}
static void jtag_puts(const char *s)
{
jtag_send(s, strlen(s));
}
static int jtag_tstc(void)
{
return (bfin_read_DBGSTAT() & 0x2);
}
/* Receive a buffer. The format is:
* [32bit length][actual data]
*/
static size_t inbound_len;
static int leftovers_len;
static uint32_t leftovers;
static int jtag_getc(void)
{
int ret;
uint32_t emudat;
/* see if any data is left over */
if (leftovers_len) {
--leftovers_len;
ret = leftovers & 0xff;
leftovers >>= 8;
return ret;
}
/* wait for new data ! */
while (!jtag_tstc())
continue;
__asm__("%0 = emudat;" : "=d"(emudat));
if (inbound_len == 0) {
/* grab the length */
inbound_len = emudat;
} else {
/* store the bytes */
leftovers_len = min(4, inbound_len);
inbound_len -= leftovers_len;
leftovers = emudat;
}
return jtag_getc();
}
int drv_jtag_console_init(void)
{
device_t dev;
int ret;
memset(&dev, 0x00, sizeof(dev));
strcpy(dev.name, "jtag");
dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
dev.putc = jtag_putc;
dev.puts = jtag_puts;
dev.tstc = jtag_tstc;
dev.getc = jtag_getc;
ret = device_register(&dev);
return (ret == 0 ? 1 : ret);
}
#ifdef CONFIG_UART_CONSOLE_IS_JTAG
/* Since the JTAG is always available (at power on), allow it to fake a UART */
void serial_set_baud(uint32_t baud) {}
void serial_setbrg(void) {}
int serial_init(void) { return 0; }
void serial_putc(const char c) __attribute__((alias("jtag_putc")));
void serial_puts(const char *s) __attribute__((alias("jtag_puts")));
int serial_tstc(void) __attribute__((alias("jtag_tstc")));
int serial_getc(void) __attribute__((alias("jtag_getc")));
#endif