upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/m68k/cpu/mcf547x_8x/pci.c

154 lines
4.6 KiB

/*
* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* PCI Configuration space access support
*/
#include <common.h>
#include <pci.h>
#include <asm/io.h>
#include <asm/immap.h>
#if defined(CONFIG_PCI)
/* System RAM mapped over PCI */
#define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
#define cfg_read(val, addr, type, op) *val = op((type)(addr));
#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
#define PCI_OP(rw, size, type, op, mask) \
int pci_##rw##_cfg_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 addr = 0; \
u16 cfg_type = 0; \
addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
out_be32(hose->cfg_addr, addr); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
__asm__ __volatile__("nop"); \
__asm__ __volatile__("nop"); \
out_be32(hose->cfg_addr, addr & 0x7fffffff); \
return 0; \
}
PCI_OP(read, byte, u8 *, in_8, 3)
PCI_OP(read, word, u16 *, in_le16, 2)
PCI_OP(write, byte, u8, out_8, 3)
PCI_OP(write, word, u16, out_le16, 2)
PCI_OP(write, dword, u32, out_le32, 0)
int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
int offset, u32 * val)
{
u32 addr;
u32 tmpv;
u32 mask = 2; /* word access */
/* Read lower 16 bits */
addr = ((offset & 0xfc) | (dev) | 0x80000000);
out_be32(hose->cfg_addr, addr);
*val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
__asm__ __volatile__("nop");
out_be32(hose->cfg_addr, addr & 0x7fffffff);
/* Read upper 16 bits */
offset += 2;
addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
out_be32(hose->cfg_addr, addr);
tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
__asm__ __volatile__("nop");
out_be32(hose->cfg_addr, addr & 0x7fffffff);
/* combine results into dword value */
*val = (tmpv << 16) | *val;
return 0;
}
void pci_mcf547x_8x_init(struct pci_controller *hose)
{
pci_t *pci = (pci_t *) MMAP_PCI;
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Port configuration */
out_be16(&gpio->par_pcibg,
GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) |
GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) |
GPIO_PAR_PCIBG_PCIBG4(3));
out_be16(&gpio->par_pcibr,
GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) |
GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) |
GPIO_PAR_PCIBR_PCIBR4(3));
/* Assert reset bit */
setbits_be32(&pci->gscr, PCI_GSCR_PR);
out_be32(&pci->tcr1, PCI_TCR1_P);
/* Initiator windows */
out_be32(&pci->iw0btar,
CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16));
out_be32(&pci->iw1btar,
CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16));
out_be32(&pci->iw2btar,
CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16));
out_be32(&pci->iwcr,
PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO);
out_be32(&pci->icr, 0);
/* Enable bus master and mem access */
out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M);
/* Cache line size and master latency */
out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xf8));
out_be32(&pci->cr2, 0);
#ifdef CONFIG_SYS_PCI_BAR0
out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0));
out_be32(&pci->tbatr0a, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN);
#endif
#ifdef CONFIG_SYS_PCI_BAR1
out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1));
out_be32(&pci->tbatr1a, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN);
#endif
/* Deassert reset bit */
clrbits_be32(&pci->gscr, PCI_GSCR_PR);
udelay(1000);
/* Enable PCI bus master support */
hose->first_busno = 0;
hose->last_busno = 0xff;
pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
hose->region_count = 3;
hose->cfg_addr = &(pci->car);
hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
pci_write_cfg_dword);
/* Hose scan */
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
}
#endif /* CONFIG_PCI */