upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
357 lines
7.6 KiB
357 lines
7.6 KiB
/*
|
|
* Lowlevel setup for ORIGEN board based on S5PV310
|
|
*
|
|
* Copyright (C) 2011 Samsung Electronics
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include "origen_setup.h"
|
|
/*
|
|
* Register usages:
|
|
*
|
|
* r5 has zero always
|
|
* r7 has GPIO part1 base 0x11400000
|
|
* r6 has GPIO part2 base 0x11000000
|
|
*/
|
|
|
|
_TEXT_BASE:
|
|
.word CONFIG_SYS_TEXT_BASE
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
push {lr}
|
|
|
|
/* r5 has always zero */
|
|
mov r5, #0
|
|
ldr r7, =S5PC210_GPIO_PART1_BASE
|
|
ldr r6, =S5PC210_GPIO_PART2_BASE
|
|
|
|
/* check reset status */
|
|
ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
|
|
ldr r1, [r0]
|
|
|
|
/* AFTR wakeup reset */
|
|
ldr r2, =S5P_CHECK_DIDLE
|
|
cmp r1, r2
|
|
beq exit_wakeup
|
|
|
|
/* LPA wakeup reset */
|
|
ldr r2, =S5P_CHECK_LPA
|
|
cmp r1, r2
|
|
beq exit_wakeup
|
|
|
|
/* Sleep wakeup reset */
|
|
ldr r2, =S5P_CHECK_SLEEP
|
|
cmp r1, r2
|
|
beq wakeup_reset
|
|
|
|
/*
|
|
* If U-boot is already running in ram, no need to relocate U-Boot.
|
|
* Memory controller must be configured before relocating U-Boot
|
|
* in ram.
|
|
*/
|
|
ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
|
|
bic r1, pc, r0 /* pc <- current addr of code */
|
|
/* r1 <- unmasked bits of pc */
|
|
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
|
|
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
|
|
cmp r1, r2 /* compare r1, r2 */
|
|
beq 1f /* r0 == r1 then skip sdram init */
|
|
|
|
/* init system clock */
|
|
bl system_clock_init
|
|
|
|
/* Memory initialize */
|
|
bl mem_ctrl_asm_init
|
|
|
|
1:
|
|
/* for UART */
|
|
bl uart_asm_init
|
|
bl tzpc_init
|
|
pop {pc}
|
|
|
|
wakeup_reset:
|
|
bl system_clock_init
|
|
bl mem_ctrl_asm_init
|
|
bl tzpc_init
|
|
|
|
exit_wakeup:
|
|
/* Load return address and jump to kernel */
|
|
ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
|
|
|
|
/* r1 = physical address of s5pc210_cpu_resume function */
|
|
ldr r1, [r0]
|
|
|
|
/* Jump to kernel*/
|
|
mov pc, r1
|
|
nop
|
|
nop
|
|
|
|
/*
|
|
* system_clock_init: Initialize core clock and bus clock.
|
|
* void system_clock_init(void)
|
|
*/
|
|
system_clock_init:
|
|
push {lr}
|
|
ldr r0, =S5PC210_CLOCK_BASE
|
|
|
|
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
|
|
ldr r1, =CLK_SRC_CPU_VAL
|
|
ldr r2, =CLK_SRC_CPU_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* wait ?us */
|
|
mov r1, #0x10000
|
|
2: subs r1, r1, #1
|
|
bne 2b
|
|
|
|
ldr r1, =CLK_SRC_TOP0_VAL
|
|
ldr r2, =CLK_SRC_TOP0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
ldr r1, =CLK_SRC_TOP1_VAL
|
|
ldr r2, =CLK_SRC_TOP1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* DMC */
|
|
ldr r1, =CLK_SRC_DMC_VAL
|
|
ldr r2, =CLK_SRC_DMC_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/*CLK_SRC_LEFTBUS */
|
|
ldr r1, =CLK_SRC_LEFTBUS_VAL
|
|
ldr r2, =CLK_SRC_LEFTBUS_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/*CLK_SRC_RIGHTBUS */
|
|
ldr r1, =CLK_SRC_RIGHTBUS_VAL
|
|
ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
|
|
ldr r1, =CLK_SRC_FSYS_VAL
|
|
ldr r2, =CLK_SRC_FSYS_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* UART[0:4] */
|
|
ldr r1, =CLK_SRC_PERIL0_VAL
|
|
ldr r2, =CLK_SRC_PERIL0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* wait ?us */
|
|
mov r1, #0x10000
|
|
3: subs r1, r1, #1
|
|
bne 3b
|
|
|
|
/* CLK_DIV_CPU0 */
|
|
ldr r1, =CLK_DIV_CPU0_VAL
|
|
ldr r2, =CLK_DIV_CPU0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* CLK_DIV_CPU1 */
|
|
ldr r1, =CLK_DIV_CPU1_VAL
|
|
ldr r2, =CLK_DIV_CPU1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* CLK_DIV_DMC0 */
|
|
ldr r1, =CLK_DIV_DMC0_VAL
|
|
ldr r2, =CLK_DIV_DMC0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/*CLK_DIV_DMC1 */
|
|
ldr r1, =CLK_DIV_DMC1_VAL
|
|
ldr r2, =CLK_DIV_DMC1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* CLK_DIV_LEFTBUS */
|
|
ldr r1, =CLK_DIV_LEFTBUS_VAL
|
|
ldr r2, =CLK_DIV_LEFTBUS_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* CLK_DIV_RIGHTBUS */
|
|
ldr r1, =CLK_DIV_RIGHTBUS_VAL
|
|
ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* CLK_DIV_TOP */
|
|
ldr r1, =CLK_DIV_TOP_VAL
|
|
ldr r2, =CLK_DIV_TOP_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* MMC[0:1] */
|
|
ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
|
|
ldr r2, =CLK_DIV_FSYS1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* MMC[2:3] */
|
|
ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
|
|
ldr r2, =CLK_DIV_FSYS2_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* MMC4 */
|
|
ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
|
|
ldr r2, =CLK_DIV_FSYS3_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* CLK_DIV_PERIL0: UART Clock Divisors */
|
|
ldr r1, =CLK_DIV_PERIL0_VAL
|
|
ldr r2, =CLK_DIV_PERIL0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* Set PLL locktime */
|
|
ldr r1, =PLL_LOCKTIME
|
|
ldr r2, =APLL_LOCK_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
ldr r1, =PLL_LOCKTIME
|
|
ldr r2, =MPLL_LOCK_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
ldr r1, =PLL_LOCKTIME
|
|
ldr r2, =EPLL_LOCK_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
ldr r1, =PLL_LOCKTIME
|
|
ldr r2, =VPLL_LOCK_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* APLL_CON1 */
|
|
ldr r1, =APLL_CON1_VAL
|
|
ldr r2, =APLL_CON1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* APLL_CON0 */
|
|
ldr r1, =APLL_CON0_VAL
|
|
ldr r2, =APLL_CON0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* MPLL_CON1 */
|
|
ldr r1, =MPLL_CON1_VAL
|
|
ldr r2, =MPLL_CON1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* MPLL_CON0 */
|
|
ldr r1, =MPLL_CON0_VAL
|
|
ldr r2, =MPLL_CON0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* EPLL */
|
|
ldr r1, =EPLL_CON1_VAL
|
|
ldr r2, =EPLL_CON1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* EPLL_CON0 */
|
|
ldr r1, =EPLL_CON0_VAL
|
|
ldr r2, =EPLL_CON0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* VPLL_CON1 */
|
|
ldr r1, =VPLL_CON1_VAL
|
|
ldr r2, =VPLL_CON1_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* VPLL_CON0 */
|
|
ldr r1, =VPLL_CON0_VAL
|
|
ldr r2, =VPLL_CON0_OFFSET
|
|
str r1, [r0, r2]
|
|
|
|
/* wait ?us */
|
|
mov r1, #0x30000
|
|
4: subs r1, r1, #1
|
|
bne 4b
|
|
|
|
pop {pc}
|
|
/*
|
|
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
|
|
* void uart_asm_init(void)
|
|
*/
|
|
.globl uart_asm_init
|
|
uart_asm_init:
|
|
|
|
/* setup UART0-UART3 GPIOs (part1) */
|
|
mov r0, r7
|
|
ldr r1, =S5PC210_GPIO_A0_CON_VAL
|
|
str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
|
|
ldr r1, =S5PC210_GPIO_A1_CON_VAL
|
|
str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
|
|
|
|
ldr r0, =S5PC210_UART_BASE
|
|
add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
|
|
|
|
ldr r1, =ULCON_VAL
|
|
str r1, [r0, #ULCON_OFFSET]
|
|
ldr r1, =UCON_VAL
|
|
str r1, [r0, #UCON_OFFSET]
|
|
ldr r1, =UFCON_VAL
|
|
str r1, [r0, #UFCON_OFFSET]
|
|
ldr r1, =UBRDIV_VAL
|
|
str r1, [r0, #UBRDIV_OFFSET]
|
|
ldr r1, =UFRACVAL_VAL
|
|
str r1, [r0, #UFRACVAL_OFFSET]
|
|
mov pc, lr
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/* Setting TZPC[TrustZone Protection Controller] */
|
|
tzpc_init:
|
|
ldr r0, =TZPC0_BASE
|
|
mov r1, #R0SIZE
|
|
str r1, [r0]
|
|
mov r1, #DECPROTXSET
|
|
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
|
|
|
ldr r0, =TZPC1_BASE
|
|
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
|
|
|
ldr r0, =TZPC2_BASE
|
|
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
|
|
|
ldr r0, =TZPC3_BASE
|
|
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
|
|
|
ldr r0, =TZPC4_BASE
|
|
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
|
|
|
ldr r0, =TZPC5_BASE
|
|
str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
|
|
str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
|
|
|
|
mov pc, lr
|
|
|