upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
248 lines
5.8 KiB
248 lines
5.8 KiB
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
|
|
*
|
|
* (C) Copyright 2005-2010
|
|
* Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc5xxx.h>
|
|
#include <malloc.h>
|
|
#include <pci.h>
|
|
#include <i2c.h>
|
|
#include <fpga.h>
|
|
#include <environment.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include "fpga.h"
|
|
#include "mvsmr.h"
|
|
#include "../common/mv_common.h"
|
|
|
|
#define SDRAM_DDR 1
|
|
#define SDRAM_MODE 0x018D0000
|
|
#define SDRAM_EMODE 0x40090000
|
|
#define SDRAM_CONTROL 0x715f0f00
|
|
#define SDRAM_CONFIG1 0xd3722930
|
|
#define SDRAM_CONFIG2 0x46770000
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void sdram_start(int hi_addr)
|
|
{
|
|
long hi_bit = hi_addr ? 0x01000000 : 0;
|
|
|
|
/* unlock mode register */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 |
|
|
hi_bit);
|
|
|
|
/* precharge all banks */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 |
|
|
hi_bit);
|
|
|
|
/* set mode register: extended mode */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE);
|
|
|
|
/* set mode register: reset DLL */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000);
|
|
|
|
/* precharge all banks */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 |
|
|
hi_bit);
|
|
|
|
/* auto refresh */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 |
|
|
hi_bit);
|
|
|
|
/* set mode register */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
|
|
|
|
/* normal operation */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit);
|
|
}
|
|
|
|
phys_addr_t initdram(int board_type)
|
|
{
|
|
ulong dramsize = 0;
|
|
ulong test1,
|
|
test2;
|
|
|
|
/* setup SDRAM chip selects */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e);
|
|
|
|
/* setup config registers */
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
|
|
|
|
/* find RAM size using SDRAM CS0 only */
|
|
sdram_start(0);
|
|
test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
|
|
sdram_start(1);
|
|
test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
|
|
if (test1 > test2) {
|
|
sdram_start(0);
|
|
dramsize = test1;
|
|
} else
|
|
dramsize = test2;
|
|
|
|
if (dramsize < (1 << 20))
|
|
dramsize = 0;
|
|
|
|
if (dramsize > 0)
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CS0CFG, 0x13 +
|
|
__builtin_ffs(dramsize >> 20) - 1);
|
|
else
|
|
out_be32((u32 *)MPC5XXX_SDRAM_CS0CFG, 0);
|
|
|
|
return dramsize;
|
|
}
|
|
|
|
void mvsmr_init_gpio(void)
|
|
{
|
|
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
|
|
struct mpc5xxx_wu_gpio *wu_gpio =
|
|
(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
|
|
struct mpc5xxx_gpt_0_7 *timers = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
|
|
|
|
printf("Ports : 0x%08x\n", gpio->port_config);
|
|
printf("PORCFG: 0x%08x\n", in_be32((unsigned *)MPC5XXX_CDM_PORCFG));
|
|
|
|
out_be32(&gpio->simple_ddr, SIMPLE_DDR);
|
|
out_be32(&gpio->simple_dvo, SIMPLE_DVO);
|
|
out_be32(&gpio->simple_ode, SIMPLE_ODE);
|
|
out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN);
|
|
|
|
out_8(&gpio->sint_ode, SINT_ODE);
|
|
out_8(&gpio->sint_ddr, SINT_DDR);
|
|
out_8(&gpio->sint_dvo, SINT_DVO);
|
|
out_8(&gpio->sint_inten, SINT_INTEN);
|
|
out_be16(&gpio->sint_itype, SINT_ITYPE);
|
|
out_8(&gpio->sint_gpioe, SINT_GPIOEN);
|
|
|
|
out_8(&wu_gpio->ode, WKUP_ODE);
|
|
out_8(&wu_gpio->ddr, WKUP_DIR);
|
|
out_8(&wu_gpio->dvo, WKUP_DO);
|
|
out_8(&wu_gpio->enable, WKUP_EN);
|
|
|
|
out_be32(&timers->gpt0.emsr, 0x00000234); /* OD output high */
|
|
out_be32(&timers->gpt1.emsr, 0x00000234);
|
|
out_be32(&timers->gpt2.emsr, 0x00000234);
|
|
out_be32(&timers->gpt3.emsr, 0x00000234);
|
|
out_be32(&timers->gpt4.emsr, 0x00000234);
|
|
out_be32(&timers->gpt5.emsr, 0x00000234);
|
|
out_be32(&timers->gpt6.emsr, 0x00000024); /* push-pull output low */
|
|
out_be32(&timers->gpt7.emsr, 0x00000024);
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
char *s = getenv("reset_env");
|
|
|
|
if (s) {
|
|
printf(" === FACTORY RESET ===\n");
|
|
mv_reset_environment();
|
|
saveenv();
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
void mvsmr_get_dbg_present(void)
|
|
{
|
|
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
|
|
struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
|
|
|
|
if (in_be32(&gpio->simple_ival) & COP_PRESENT) {
|
|
setenv("dbg_present", "no\0");
|
|
setenv("bootstopkey", "abcdefghijklmnopqrstuvwxyz\0");
|
|
} else {
|
|
setenv("dbg_present", "yes\0");
|
|
setenv("bootstopkey", "s\0");
|
|
setbits_8(&psc->command, PSC_RX_ENABLE);
|
|
}
|
|
}
|
|
|
|
void mvsmr_get_service_mode(void)
|
|
{
|
|
struct mpc5xxx_wu_gpio *wu_gpio =
|
|
(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
|
|
|
|
if (in_8(&wu_gpio->ival) & SERVICE_MODE)
|
|
setenv("servicemode", "no\0");
|
|
else
|
|
setenv("servicemode", "yes\0");
|
|
}
|
|
|
|
int mvsmr_get_mac(void)
|
|
{
|
|
unsigned char mac[6];
|
|
struct mpc5xxx_wu_gpio *wu_gpio =
|
|
(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
|
|
|
|
if (in_8(&wu_gpio->ival) & LAN_PRSNT) {
|
|
setenv("lan_present", "no\0");
|
|
return -1;
|
|
} else
|
|
setenv("lan_present", "yes\0");
|
|
|
|
i2c_read(0x50, 0, 1, mac, 6);
|
|
|
|
eth_setenv_enetaddr("ethaddr", mac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
mvsmr_init_gpio();
|
|
printf("Board: Matrix Vision mvSMR\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
void flash_preinit(void)
|
|
{
|
|
/*
|
|
* Now, when we are in RAM, enable flash write
|
|
* access for detection process.
|
|
* Note that CS_BOOT cannot be cleared when
|
|
* executing in flash.
|
|
*/
|
|
clrbits_be32((u32 *)MPC5XXX_BOOTCS_CFG, 0x1);
|
|
}
|
|
|
|
void flash_afterinit(ulong size)
|
|
{
|
|
out_be32((u32 *)MPC5XXX_BOOTCS_START,
|
|
START_REG(CONFIG_SYS_BOOTCS_START | size));
|
|
out_be32((u32 *)MPC5XXX_CS0_START,
|
|
START_REG(CONFIG_SYS_BOOTCS_START | size));
|
|
out_be32((u32 *)MPC5XXX_BOOTCS_STOP,
|
|
STOP_REG(CONFIG_SYS_BOOTCS_START | size, size));
|
|
out_be32((u32 *)MPC5XXX_CS0_STOP,
|
|
STOP_REG(CONFIG_SYS_BOOTCS_START | size, size));
|
|
}
|
|
|
|
struct pci_controller hose;
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
mvsmr_get_dbg_present();
|
|
mvsmr_get_service_mode();
|
|
mvsmr_init_fpga();
|
|
mv_load_fpga();
|
|
pci_mpc5xxx_init(&hose);
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
if (!mvsmr_get_mac())
|
|
return cpu_eth_init(bis);
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
|