upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
290 lines
9.1 KiB
290 lines
9.1 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ic/sc520.h>
|
|
#include <asm/ic/ali512x.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static void irq_init(void)
|
|
{
|
|
|
|
/* disable global interrupt mode */
|
|
write_mmcr_byte(SC520_PICICR, 0x40);
|
|
|
|
/* set irq0-7 to edge */
|
|
write_mmcr_byte(SC520_MPICMODE, 0x00);
|
|
|
|
/* set irq9-12 to level, all the other (8, 13-15) are edge */
|
|
write_mmcr_byte(SC520_SL1PICMODE, 0x1e);
|
|
|
|
/* set irq16-24 (unused slave pic2) to level */
|
|
write_mmcr_byte(SC520_SL2PICMODE, 0xff);
|
|
|
|
/* active low polarity on PIC interrupt pins,
|
|
active high polarity on all other irq pins */
|
|
write_mmcr_word(SC520_INTPINPOL, 0);
|
|
|
|
/* set irq number mapping */
|
|
write_mmcr_byte(SC520_GPTMR0MAP,0); /* disable GP timer 0 INT */
|
|
write_mmcr_byte(SC520_GPTMR1MAP,0); /* disable GP timer 1 INT */
|
|
write_mmcr_byte(SC520_GPTMR2MAP,0); /* disable GP timer 2 INT */
|
|
write_mmcr_byte(SC520_PIT0MAP,0x1); /* Set PIT timer 0 INT to IRQ0 */
|
|
write_mmcr_byte(SC520_PIT1MAP,0); /* diable PIT timer 1 INT */
|
|
write_mmcr_byte(SC520_PIT2MAP,0); /* diable PIT timer 2 INT */
|
|
write_mmcr_byte(SC520_PCIINTAMAP,0x4); /* Set PCI INT A to IRQ9 */
|
|
write_mmcr_byte(SC520_PCIINTBMAP,0x5); /* Set PCI INT B to IRQ10 */
|
|
write_mmcr_byte(SC520_PCIINTCMAP,0x6); /* Set PCI INT C to IRQ11 */
|
|
write_mmcr_byte(SC520_PCIINTDMAP,0x7); /* Set PCI INT D to IRQ12 */
|
|
write_mmcr_byte(SC520_DMABCINTMAP,0); /* disable DMA INT */
|
|
write_mmcr_byte(SC520_SSIMAP,0); /* disable Synchronius serial INT */
|
|
write_mmcr_byte(SC520_WDTMAP,0); /* disable Watchdor INT */
|
|
write_mmcr_byte(SC520_RTCMAP,0x3); /* Set RTC int to 8 */
|
|
write_mmcr_byte(SC520_WPVMAP,0); /* disable write protect INT */
|
|
write_mmcr_byte(SC520_ICEMAP,0x2); /* Set ICE Debug Serielport INT to IRQ1 */
|
|
write_mmcr_byte(SC520_FERRMAP,0x8); /* Set FP error INT to IRQ13 */
|
|
write_mmcr_byte(SC520_GP0IMAP,6); /* Set GPIRQ0 (ISA IRQ2) to IRQ9 */
|
|
write_mmcr_byte(SC520_GP1IMAP,2); /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */
|
|
write_mmcr_byte(SC520_GP2IMAP,7); /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */
|
|
|
|
if (CFG_USE_SIO_UART) {
|
|
write_mmcr_byte(SC520_UART1MAP,0); /* disable internal UART1 INT */
|
|
write_mmcr_byte(SC520_UART2MAP,0); /* disable internal UART2 INT */
|
|
write_mmcr_byte(SC520_GP3IMAP,11); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */
|
|
write_mmcr_byte(SC520_GP4IMAP,12); /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */
|
|
} else {
|
|
write_mmcr_byte(SC520_UART1MAP,12); /* Set internal UART2 INT to IRQ4 */
|
|
write_mmcr_byte(SC520_UART2MAP,11); /* Set internal UART2 INT to IRQ3 */
|
|
write_mmcr_byte(SC520_GP3IMAP,0); /* disable GPIRQ3 (ISA IRQ3) */
|
|
write_mmcr_byte(SC520_GP4IMAP,0); /* disable GPIRQ4 (ISA IRQ4) */
|
|
}
|
|
|
|
write_mmcr_byte(SC520_GP5IMAP,13); /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */
|
|
write_mmcr_byte(SC520_GP6IMAP,21); /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */
|
|
write_mmcr_byte(SC520_GP7IMAP,22); /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */
|
|
write_mmcr_byte(SC520_GP8IMAP,3); /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */
|
|
write_mmcr_byte(SC520_GP9IMAP,4); /* Set GPIRQ9 (ISA IRQ9) to IRQ9 */
|
|
write_mmcr_byte(SC520_GP10IMAP,9); /* Set GPIRQ10 (ISA IRQ10) to IRQ10 */
|
|
write_mmcr_word(SC520_PCIHOSTMAP,0x11f); /* Map PCI hostbridge INT to NMI */
|
|
write_mmcr_word(SC520_ECCMAP,0x100); /* Map SDRAM ECC failure INT to NMI */
|
|
|
|
}
|
|
|
|
/* PCI stuff */
|
|
static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
char pin;
|
|
int irq;
|
|
|
|
|
|
pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
|
|
irq = pin-1;
|
|
|
|
switch (PCI_DEV(dev)) {
|
|
case 20:
|
|
break;
|
|
case 19:
|
|
irq+=1;
|
|
break;
|
|
case 18:
|
|
irq+=2;
|
|
break;
|
|
case 17:
|
|
irq+=3;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
irq&=3; /* wrap around */
|
|
irq+=9; /* lowest IRQ is 9 */
|
|
|
|
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, irq);
|
|
#if 0
|
|
printf("fixup_irq: device %d pin %c irq %d\n",
|
|
PCI_DEV(dev), 'A' + pin -1, irq);
|
|
#endif
|
|
}
|
|
|
|
static struct pci_controller sc520_cdp_hose = {
|
|
fixup_irq: pci_sc520_cdp_fixup_irq,
|
|
};
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
pci_sc520_init(&sc520_cdp_hose);
|
|
}
|
|
|
|
|
|
static void silence_uart(int port)
|
|
{
|
|
outb(0, port+1);
|
|
}
|
|
|
|
void setup_ali_sio(int uart_primary)
|
|
{
|
|
ali512x_init();
|
|
|
|
ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0);
|
|
ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3);
|
|
ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4);
|
|
ali512x_set_uart(ALI_ENABLED, ALI_UART2, uart_primary?0x2f8:0x2e8, 3);
|
|
ali512x_set_rtc(ALI_DISABLED, 0, 0);
|
|
ali512x_set_kbc(ALI_ENABLED, 1, 12);
|
|
ali512x_set_cio(ALI_ENABLED);
|
|
|
|
/* IrDa pins */
|
|
ali512x_cio_function(12, 1, 0, 0);
|
|
ali512x_cio_function(13, 1, 0, 0);
|
|
|
|
/* SSI chip select pins */
|
|
ali512x_cio_function(14, 0, 0, 0); /* SSI_CS */
|
|
ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */
|
|
ali512x_cio_function(16, 0, 1, 0); /* SSI_SPI# (inverted) */
|
|
|
|
/* Board REV pins */
|
|
ali512x_cio_function(20, 0, 0, 1);
|
|
ali512x_cio_function(21, 0, 0, 1);
|
|
ali512x_cio_function(22, 0, 0, 1);
|
|
ali512x_cio_function(23, 0, 0, 1);
|
|
}
|
|
|
|
|
|
/* set up the ISA bus timing and system address mappings */
|
|
static void bus_init(void)
|
|
{
|
|
|
|
/* set up the GP IO pins */
|
|
write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */
|
|
write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */
|
|
write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */
|
|
write_mmcr_byte(SC520_CLKSEL, 0x70);
|
|
|
|
|
|
write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
|
|
write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */
|
|
write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */
|
|
write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */
|
|
write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */
|
|
write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
|
|
write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */
|
|
|
|
write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */
|
|
write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up timing of ROMCS1 */
|
|
write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */
|
|
|
|
/* adjust the memory map:
|
|
* by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
|
|
* and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio
|
|
* we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
|
|
|
|
|
|
/* SRAM = GPCS3 128k @ d0000-effff*/
|
|
write_mmcr_long(SC520_PAR2, 0x4e00400d);
|
|
|
|
/* IDE0 = GPCS6 1f0-1f7 */
|
|
write_mmcr_long(SC520_PAR3, 0x380801f0);
|
|
|
|
/* IDE1 = GPCS7 3f6 */
|
|
write_mmcr_long(SC520_PAR4, 0x3c0003f6);
|
|
/* bootcs */
|
|
write_mmcr_long(SC520_PAR12, 0x8bffe800);
|
|
/* romcs2 */
|
|
write_mmcr_long(SC520_PAR13, 0xcbfff000);
|
|
/* romcs1 */
|
|
write_mmcr_long(SC520_PAR14, 0xabfff800);
|
|
/* 680 LEDS */
|
|
write_mmcr_long(SC520_PAR15, 0x30000640);
|
|
|
|
asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
|
|
|
|
if (CFG_USE_SIO_UART) {
|
|
write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);
|
|
setup_ali_sio(1);
|
|
} else {
|
|
write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
|
|
setup_ali_sio(0);
|
|
silence_uart(0x3e8);
|
|
silence_uart(0x2e8);
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Miscelaneous platform dependent initialisations
|
|
*/
|
|
|
|
int board_init(void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
init_sc520();
|
|
bus_init();
|
|
irq_init();
|
|
|
|
/* max drive current on SDRAM */
|
|
write_mmcr_word(SC520_DSCTL, 0x0100);
|
|
|
|
/* enter debug mode after next reset (only if jumper is also set) */
|
|
write_mmcr_byte(SC520_RESCFG, 0x08);
|
|
|
|
/* configure the software timer to 33.333MHz */
|
|
write_mmcr_byte(SC520_SWTMRCFG, 0);
|
|
gd->bus_clk = 33333000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
init_sc520_dram();
|
|
return 0;
|
|
}
|
|
|
|
void show_boot_progress(int val)
|
|
{
|
|
outb(val&0xff, 0x80);
|
|
outb((val&0xff00)>>8, 0x680);
|
|
}
|
|
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
int minor;
|
|
int major;
|
|
|
|
major = minor = 0;
|
|
major |= ali512x_cio_in(23)?2:0;
|
|
major |= ali512x_cio_in(22)?1:0;
|
|
minor |= ali512x_cio_in(21)?2:0;
|
|
minor |= ali512x_cio_in(20)?1:0;
|
|
|
|
printf("AMD SC520 CDP revision %d.%d\n", major, minor);
|
|
|
|
return 0;
|
|
}
|
|
|