upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
265 lines
9.1 KiB
265 lines
9.1 KiB
/******************************************************************************
|
|
*
|
|
* This source code has been made available to you by IBM on an AS-IS
|
|
* basis. Anyone receiving this source is licensed under IBM
|
|
* copyrights to use it in any way he or she deems fit, including
|
|
* copying it, modifying it, compiling it, and redistributing it either
|
|
* with or without modifications. No license under IBM patents or
|
|
* patent applications is to be implied by the copyright license.
|
|
*
|
|
* Any user of this software should understand that IBM cannot provide
|
|
* technical support for this software and will not be responsible for
|
|
* any consequences resulting from the use of this software.
|
|
*
|
|
* Any person who transfers this source code or any derivative work
|
|
* must include the IBM copyright notice, this paragraph, and the
|
|
* preceding two paragraphs in the transferred software.
|
|
*
|
|
* COPYRIGHT I B M CORPORATION 1995
|
|
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
*
|
|
*****************************************************************************/
|
|
#include <config.h>
|
|
#include <ppc4xx.h>
|
|
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
/******************************************************************************
|
|
* Function: ext_bus_cntlr_init
|
|
*
|
|
* Description: Configures EBC Controller and a few basic chip selects.
|
|
*
|
|
* CS0 is setup to get the Boot Flash out of the addresss range
|
|
* so that we may setup a stack. CS7 is setup so that we can
|
|
* access and reset the hardware watchdog.
|
|
*
|
|
* IMPORTANT: For pass1 this code must run from
|
|
* cache since you can not reliably change a peripheral banks
|
|
* timing register (pbxap) while running code from that bank.
|
|
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
* execute the code that modifies bank 0 timings from ROM, so
|
|
* we run it from cache.
|
|
*
|
|
* Notes: Does NOT use the stack.
|
|
*****************************************************************************/
|
|
.section ".text"
|
|
.align 2
|
|
.globl ext_bus_cntlr_init
|
|
.type ext_bus_cntlr_init, @function
|
|
ext_bus_cntlr_init:
|
|
mflr r0
|
|
/********************************************************************
|
|
* Prefetch entire ext_bus_cntrl_init function into the icache.
|
|
* This is necessary because we are going to change the same CS we
|
|
* are executing from. Otherwise a CPU lockup may occur.
|
|
*******************************************************************/
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
|
|
/* Calculate number of cache lines for this function */
|
|
addi r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
|
|
mtctr r4
|
|
..ebcloop:
|
|
icbt r0, r3 /* prefetch cache line for addr in r3*/
|
|
addi r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for $CTR cache lines */
|
|
|
|
/********************************************************************
|
|
* Delay to ensure all accesses to ROM are complete before changing
|
|
* bank 0 timings. 200usec should be enough.
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
|
|
*******************************************************************/
|
|
addis r3, 0, 0x0
|
|
ori r3, r3, 0xA000 /* wait 200us from reset */
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/********************************************************************
|
|
* Setup External Bus Controller (EBC).
|
|
*******************************************************************/
|
|
addi r3, 0, epcr
|
|
mtdcr ebccfga, r3
|
|
addis r4, 0, 0xb040 /* Device base timeout = 1024 cycles */
|
|
ori r4, r4, 0x0 /* Drive CS with external master */
|
|
mtdcr ebccfgd, r4
|
|
|
|
/********************************************************************
|
|
* Change PCIINT signal to PerWE
|
|
*******************************************************************/
|
|
mfdcr r4, cntrl1
|
|
ori r4, r4, 0x4000
|
|
mtdcr cntrl1, r4
|
|
|
|
/********************************************************************
|
|
* Memory Bank 0 (Flash Bank 0) initialization
|
|
*******************************************************************/
|
|
addi r3, 0, pb0ap
|
|
mtdcr ebccfga, r3
|
|
addis r4, 0, CFG_W7O_EBC_PB0AP@h
|
|
ori r4, r4, CFG_W7O_EBC_PB0AP@l
|
|
mtdcr ebccfgd, r4
|
|
|
|
addi r3, 0, pb0cr
|
|
mtdcr ebccfga, r3
|
|
addis r4, 0, CFG_W7O_EBC_PB0CR@h
|
|
ori r4, r4, CFG_W7O_EBC_PB0CR@l
|
|
mtdcr ebccfgd, r4
|
|
|
|
/********************************************************************
|
|
* Memory Bank 7 LEDs - NEEDED BECAUSE OF HW WATCHDOG AND LEDs.
|
|
*******************************************************************/
|
|
addi r3, 0, pb7ap
|
|
mtdcr ebccfga, r3
|
|
addis r4, 0, CFG_W7O_EBC_PB7AP@h
|
|
ori r4, r4, CFG_W7O_EBC_PB7AP@l
|
|
mtdcr ebccfgd, r4
|
|
|
|
addi r3, 0, pb7cr
|
|
mtdcr ebccfga, r3
|
|
addis r4, 0, CFG_W7O_EBC_PB7CR@h
|
|
ori r4, r4, CFG_W7O_EBC_PB7CR@l
|
|
mtdcr ebccfgd, r4
|
|
|
|
/* We are all done */
|
|
mtlr r0 /* Restore link register */
|
|
blr /* Return to calling function */
|
|
.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
|
|
/* end ext_bus_cntlr_init() */
|
|
|
|
/******************************************************************************
|
|
* Function: sdram_init
|
|
*
|
|
* Description: Configures SDRAM memory banks.
|
|
*
|
|
* Serial Presence Detect, "SPD," reads the SDRAM EEPROM
|
|
* via the IIC bus and then configures the SDRAM memory
|
|
* banks appropriately. If Auto Memory Configuration is
|
|
* is not used, it is assumed that a 4MB 11x8x2, non-ECC,
|
|
* SDRAM is soldered down.
|
|
*
|
|
* Notes: Expects that the stack is already setup.
|
|
*****************************************************************************/
|
|
.section ".text"
|
|
.align 2
|
|
.globl sdram_init
|
|
.type sdram_init, @function
|
|
sdram_init:
|
|
/* save the return info on stack */
|
|
mflr r0 /* Get link register */
|
|
stwu r1, -8(r1) /* Save back chain and move SP */
|
|
stw r0, +12(r1) /* Save link register */
|
|
|
|
/*
|
|
* First call spd_sdram to try to init SDRAM according to the
|
|
* contents of the SPD EEPROM. If the SPD EEPROM is blank or
|
|
* erronious, spd_sdram returns 0 in R3.
|
|
*/
|
|
li r3,0
|
|
bl spd_sdram
|
|
addic. r3, r3, 0 /* Check for error, save dram size */
|
|
bne ..sdri_done /* If it worked, we're done... */
|
|
|
|
/********************************************************************
|
|
* If SPD detection fails, we'll default to 4MB, 11x8x2, as this
|
|
* is the SMALLEST SDRAM size the 405 supports. We can do this
|
|
* because W7O boards have soldered on RAM, and there will always
|
|
* be some amount present. If we were using DIMMs, we should hang
|
|
* the board instead, since it doesn't have any RAM to continue
|
|
* running with.
|
|
*******************************************************************/
|
|
|
|
/*
|
|
* Disable memory controller to allow
|
|
* values to be changed.
|
|
*/
|
|
addi r3, 0, mem_mcopt1
|
|
mtdcr memcfga, r3
|
|
addis r4, 0, 0x0
|
|
ori r4, r4, 0x0
|
|
mtdcr memcfgd, r4
|
|
|
|
/*
|
|
* Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2
|
|
* All other banks are disabled.
|
|
*/
|
|
addi r3, 0, mem_mb0cf
|
|
mtdcr memcfga, r3
|
|
addis r4, 0, 0x0000 /* BA=0x0, SZ=4MB */
|
|
ori r4, r4, 0x8001 /* Mode is 5, 11x8x2or4, BE=Enabled */
|
|
mtdcr memcfgd, r4
|
|
|
|
/* Clear MB1CR,MB2CR,MB3CR to turn other banks off */
|
|
addi r4, 0, 0 /* Zero the data reg */
|
|
|
|
addi r3, r3, 4 /* Point to MB1CF reg */
|
|
mtdcr memcfga, r3 /* Set the address */
|
|
mtdcr memcfgd, r4 /* Zero the reg */
|
|
|
|
addi r3, r3, 4 /* Point to MB2CF reg */
|
|
mtdcr memcfga, r3 /* Set the address */
|
|
mtdcr memcfgd, r4 /* Zero the reg */
|
|
|
|
addi r3, r3, 4 /* Point to MB3CF reg */
|
|
mtdcr memcfga, r3 /* Set the address */
|
|
mtdcr memcfgd, r4 /* Zero the reg */
|
|
|
|
/********************************************************************
|
|
* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR.
|
|
* To set the appropriate timings, we assume sdram is
|
|
* 100MHz (pc100 compliant).
|
|
*******************************************************************/
|
|
|
|
/*
|
|
* Set up SDTR1
|
|
*/
|
|
addi r3, 0, mem_sdtr1
|
|
mtdcr memcfga, r3
|
|
addis r4, 0, 0x0086 /* SDTR1 value for 100Mhz */
|
|
ori r4, r4, 0x400D
|
|
mtdcr memcfgd, r4
|
|
|
|
/*
|
|
* Set RTR
|
|
*/
|
|
addi r3, 0, mem_rtr
|
|
mtdcr memcfga, r3
|
|
addis r4, 0, 0x05F0 /* RTR refresh val = 15.625ms@100Mhz */
|
|
mtdcr memcfgd, r4
|
|
|
|
/********************************************************************
|
|
* Delay to ensure 200usec have elapsed since reset. Assume worst
|
|
* case that the core is running 200Mhz:
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
*******************************************************************/
|
|
addis r3, 0, 0x0000
|
|
ori r3, r3, 0xA000 /* Wait 200us from reset */
|
|
mtctr r3
|
|
..spinlp2:
|
|
bdnz ..spinlp2 /* spin loop */
|
|
|
|
/********************************************************************
|
|
* Set memory controller options reg, MCOPT1.
|
|
*******************************************************************/
|
|
addi r3, 0, mem_mcopt1
|
|
mtdcr memcfga, r3
|
|
addis r4, 0, 0x80E0 /* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */
|
|
ori r4, r4, 0x0000 /* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */
|
|
mtdcr memcfgd, r4 /* EMDULR=1 */
|
|
|
|
..sdri_done:
|
|
/* restore and return */
|
|
lwz r0, +12(r1) /* Get saved link register */
|
|
addi r1, r1, +8 /* Remove frame from stack */
|
|
mtlr r0 /* Restore link register */
|
|
blr /* Return to calling function */
|
|
.Lfe1: .size sdram_init,.Lfe1-sdram_init
|
|
/* end sdram_init() */
|
|
|
|
|