upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/tools/bddb/doedit.php

170 lines
4.3 KiB

<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
<?php
// (C) Copyright 2001
// Murray Jensen <Murray.Jensen@cmst.csiro.au>
// CSIRO Manufacturing Science and Technology, Preston Lab
// doedit page (hymod_bddb / boards)
require("defs.php");
pg_head("$bddb_label - Edit Board Results");
if ($serno == 0)
die("the board serial number was not specified");
$query="update boards set";
if (isset($ethaddr)) {
if (!eth_addr_is_valid($ethaddr))
die("ethaddr is invalid ('$ethaddr')");
$query.=" ethaddr='$ethaddr',";
}
if (isset($date)) {
list($y, $m, $d) = split("-", $date);
if (!checkdate($m, $d, $y) || $y < 1999)
die("date is invalid (input '$date', " .
"yyyy-mm-dd '$y-$m-$d')");
$query.=" date='$date'";
}
if (isset($batch)) {
if (strlen($batch) > 32)
die("batch field too long (>32)");
$query.=", batch='$batch'";
}
if (isset($type)) {
if (!in_array($type, $type_vals))
die("Invalid type ($type) specified");
$query.=", type='$type'";
}
if (isset($rev)) {
if (($rev = intval($rev)) <= 0 || $rev > 255)
die("Revision number is invalid ($rev)");
$query.=sprintf(", rev=%d", $rev);
}
if (isset($location)) {
if (strlen($location) > 64)
die("location field too long (>64)");
$query.=", location='$location'";
}
if (isset($comments))
$query.=", comments='" . rawurlencode($comments) . "'";
$query.=gather_enum_multi_query("sdram", 4);
$query.=gather_enum_multi_query("flash", 4);
$query.=gather_enum_multi_query("zbt", 16);
$query.=gather_enum_multi_query("xlxtyp", 4);
$nxlx = count_enum_multi("xlxtyp", 4);
$query.=gather_enum_multi_query("xlxspd", 4);
if (count_enum_multi("xlxspd", 4) != $nxlx)
die("number of xilinx speeds not same as number of types");
$query.=gather_enum_multi_query("xlxtmp", 4);
if (count_enum_multi("xlxtmp", 4) != $nxlx)
die("number of xilinx temps. not same as number of types");
$query.=gather_enum_multi_query("xlxgrd", 4);
if (count_enum_multi("xlxgrd", 4) != $nxlx)
die("number of xilinx grades not same as number of types");
if (isset($cputyp)) {
$query.=", cputyp='$cputyp'";
if ($cpuspd == '')
die("must specify cpu speed if cpu type is defined");
$query.=", cpuspd='$cpuspd'";
if ($cpmspd == '')
die("must specify cpm speed if cpu type is defined");
$query.=", cpmspd='$cpmspd'";
if ($busspd == '')
die("must specify bus speed if cpu type is defined");
$query.=", busspd='$busspd'";
}
else {
if (isset($cpuspd))
die("can't specify cpu speed if there is no cpu");
if (isset($cpmspd))
die("can't specify cpm speed if there is no cpu");
if (isset($busspd))
die("can't specify bus speed if there is no cpu");
}
if (isset($hschin)) {
if (($hschin = intval($hschin)) < 0 || $hschin > 4)
die("Invalid number of hs input chans ($hschin)");
}
else
$hschin = 0;
if (isset($hschout)) {
if (($hschout = intval($hschout)) < 0 || $hschout > 4)
die("Invalid number of hs output chans ($hschout)");
}
else
$hschout = 0;
if (isset($hstype))
$query.=", hstype='$hstype'";
else {
if ($hschin != 0)
die("number of high-speed input channels must be zero"
. " if high-speed chip is not present");
if ($hschout != 0)
die("number of high-speed output channels must be zero"
. " if high-speed chip is not present");
}
$query.=", hschin='$hschin'";
$query.=", hschout='$hschout'";
$query.=" where serno=$serno";
mysql_query($query);
if(mysql_errno()) {
$errstr = mysql_error();
echo "\t<font size=+4>\n";
echo "\t\t<p>\n";
echo "\t\t\tThe following error was encountered:\n";
echo "\t\t</p>\n";
echo "\t\t<center>\n";
printf("\t\t\t<b>%s</b>\n", $errstr);
echo "\t\t</center>\n";
echo "\t</font>\n";
}
else {
$sernos = array($serno);
$nsernos = 1;
write_eeprom_cfg_file();
echo "\t<font size=+2>\n";
echo "\t\t<p>\n";
echo "\t\t\tThe board with serial number <b>$serno</b> was"
. " successfully updated";
if ($numerrs > 0) {
$errstr = $cfgerrs[0];
echo "<br>\n\t\t\t";
echo "(but the cfg file update failed: $errstr)";
}
echo "\n";
echo "\t\t</p>\n";
echo "\t</font>\n";
}
?>
<p>
<table align=center width="100%">
<tr>
<td align=center><a href="browse.php">Back to Browse</a></td>
<td align=center><a href="index.php">Back to Start</a></td>
</tr>
</table>
<?php
pg_foot();
?>