upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/quad100hd/quad100hd.c

93 lines
2.4 KiB

/*
* (C) Copyright 2008
* Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
*
* Based in part on board/icecube/icecube.c from PPCBoot
* (C) Copyright 2003 Intrinsyc Software
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <environment.h>
#include <logbuff.h>
#include <post.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/* taken from PPCBoot */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000000);
mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */
mtdcr(uictr, 0x00000000); /* set int trigger levels */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */
return 0;
}
/*
* Check Board Identity:
*/
int checkboard(void)
{
char *s = getenv("serial#");
#ifdef DISPLAY_BOARD_INFO
sys_info_t sysinfo;
#endif
puts("Board: Quad100hd");
if (s != NULL) {
puts(", serial# ");
puts(s);
}
putc('\n');
#ifdef DISPLAY_BOARD_INFO
/* taken from ppcboot */
get_sys_info(&sysinfo);
printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz);
printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv *
1000000));
printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
#endif
return 0;
}
phys_size_t initdram(int board_type)
{
return CFG_SDRAM_SIZE;
}