upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
317 lines
10 KiB
317 lines
10 KiB
/*
|
|
* (C) Copyright 2006
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
#include <ppc4xx_enet.h>
|
|
#include <miiphy.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern int alpr_fpga_init(void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*-------------------------------------------------------------------------
|
|
* Initialize EBC CONFIG
|
|
*-------------------------------------------------------------------------*/
|
|
mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
|
|
EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
|
|
EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
|
|
EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
|
|
EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
|
|
|
|
/*--------------------------------------------------------------------
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*-------------------------------------------------------------------*/
|
|
mtdcr (uic0sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic0er, 0x00000000); /* disable all */
|
|
mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
|
|
mtdcr (uic0pr, 0xfffffe03); /* per manual */
|
|
mtdcr (uic0tr, 0x01c00000); /* per manual */
|
|
mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic0sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic1er, 0x00000000); /* disable all */
|
|
mtdcr (uic1cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
|
|
mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
|
|
mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic2er, 0x00000000); /* disable all */
|
|
mtdcr (uic2cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
|
|
mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
|
|
mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uicb0sr, 0xfc000000); /* clear all */
|
|
mtdcr (uicb0er, 0x00000000); /* disable all */
|
|
mtdcr (uicb0cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uicb0pr, 0xfc000000); /* */
|
|
mtdcr (uicb0tr, 0x00000000); /* */
|
|
mtdcr (uicb0vr, 0x00000001); /* */
|
|
|
|
/* Setup shutdown/SSD empty interrupt as inputs */
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
|
|
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
|
|
|
|
/* Setup GPIO/IRQ multiplexing */
|
|
mtsdr(sdr_pfc0, 0x01a33e00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
unsigned short reg;
|
|
|
|
/*
|
|
* Configure LED's of both Marvell 88E1111 PHY's
|
|
*
|
|
* This has to be done after the 4xx ethernet driver is loaded,
|
|
* so "last_stage_init()" is the right place.
|
|
*/
|
|
miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®);
|
|
reg |= 0x0001;
|
|
miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg);
|
|
miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®);
|
|
reg |= 0x0001;
|
|
miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int board_rev(void)
|
|
{
|
|
/* Setup as input */
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
|
|
out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
|
|
|
|
return (in32(GPIO0_IR) >> 16) & 0x3;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
char *s = getenv ("serial#");
|
|
|
|
printf ("Board: ALPR");
|
|
if (s != NULL) {
|
|
puts (", serial# ");
|
|
puts (s);
|
|
}
|
|
printf(" (Rev. %d)\n", board_rev());
|
|
|
|
return (0);
|
|
}
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) 0x00000000;
|
|
uint *pend = (uint *) 0x08000000;
|
|
uint *p;
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*************************************************************************
|
|
* pci_pre_init
|
|
*
|
|
* This routine is called just prior to registering the hose and gives
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
*
|
|
* Different boards may wish to customize the pci controller structure
|
|
* (add regions, override default access routines, etc) or perform
|
|
* certain pre-initialization actions.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
|
|
int pci_pre_init(struct pci_controller * hose )
|
|
{
|
|
unsigned long strap;
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* The ocotea board is always configured as the host & requires the
|
|
* PCI arbiter to be enabled.
|
|
*--------------------------------------------------------------------------*/
|
|
mfsdr(sdr_sdstp1, strap);
|
|
if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
|
|
printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
|
|
return 0;
|
|
}
|
|
|
|
/* FPGA Init */
|
|
alpr_fpga_init ();
|
|
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
|
|
|
|
/*************************************************************************
|
|
* pci_target_init
|
|
*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
|
|
void pci_target_init(struct pci_controller * hose )
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
* Disable everything
|
|
*--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_PIM0SA, 0 ); /* disable */
|
|
out32r( PCIX0_PIM1SA, 0 ); /* disable */
|
|
out32r( PCIX0_PIM2SA, 0 ); /* disable */
|
|
out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
|
|
* options to not support sizes such as 128/256 MB.
|
|
*--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
|
|
out32r( PCIX0_PIM0LAH, 0 );
|
|
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
|
|
|
|
out32r( PCIX0_BAR0, 0 );
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Program the board's subsystem id/vendor id
|
|
*--------------------------------------------------------------------------*/
|
|
out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
|
|
out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
|
|
|
|
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
|
|
|
|
/*************************************************************************
|
|
* is_pci_host
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
|
|
static void wait_for_pci_ready(void)
|
|
{
|
|
/*
|
|
* Configure EREADY as input
|
|
*/
|
|
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY);
|
|
udelay(1000);
|
|
|
|
for (;;) {
|
|
if (in32(GPIO0_IR) & CFG_GPIO_EREADY)
|
|
return;
|
|
}
|
|
|
|
}
|
|
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
wait_for_pci_ready();
|
|
return 1; /* return 1 for host controller */
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
/*************************************************************************
|
|
* pci_master_init
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
|
|
void pci_master_init(struct pci_controller *hose)
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
| PowerPC440 PCI Master configuration.
|
|
| Map PLB/processor addresses to PCI memory space.
|
|
| PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
|
|
| Use byte reversed out routines to handle endianess.
|
|
| Make this region non-prefetchable.
|
|
+--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_POM0SA, 0 ); /* disable */
|
|
out32r( PCIX0_POM1SA, 0 ); /* disable */
|
|
out32r( PCIX0_POM2SA, 0 ); /* disable */
|
|
|
|
out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */
|
|
out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */
|
|
out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
|
|
out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */
|
|
out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
|
|
|
|
out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
|
|
out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */
|
|
out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
|
|
out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */
|
|
out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
|
|
|
|
#ifdef CONFIG_POST
|
|
/*
|
|
* Returns 1 if keys pressed to start the power-on long-running tests
|
|
* Called from board_init_f().
|
|
*/
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
|
|
return (ctrlc());
|
|
}
|
|
#endif
|
|
|