upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
286 lines
7.5 KiB
286 lines
7.5 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Paul Geerinckx
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include "atm.h"
|
|
#include <i2c.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* used PLD registers */
|
|
# define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0)
|
|
# define PLD_EXT_RES (unsigned char *) (0x10000000 + 10)
|
|
# define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11)
|
|
# define PLD_EXT_LED (unsigned char *) (0x10000000 + 12)
|
|
# define PLD_EXT_X21 (unsigned char *) (0x10000000 + 13)
|
|
|
|
#define _NOT_USED_ 0xFFFFFFFF
|
|
|
|
const uint sdram_table[] = {
|
|
/*
|
|
* Single Read. (Offset 0 in UPMA RAM)
|
|
*/
|
|
0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */
|
|
_NOT_USED_,
|
|
/*
|
|
* SDRAM Initialization (offset 5 in UPMA RAM)
|
|
*
|
|
* This is no UPM entry point. The following definition uses
|
|
* the remaining space to establish an initialization
|
|
* sequence, which is executed by a RUN command.
|
|
*
|
|
*/
|
|
0xFFFAF834, 0xFFE5B435, /* last */
|
|
_NOT_USED_,
|
|
/*
|
|
* Burst Read. (Offset 8 in UPMA RAM)
|
|
*/
|
|
0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00,
|
|
0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Single Write. (Offset 18 in UPMA RAM)
|
|
*/
|
|
0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */
|
|
_NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Burst Write. (Offset 20 in UPMA RAM)
|
|
*/
|
|
0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
|
|
0xF1AAF804, 0xFFA5F447, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* Refresh (Offset 30 in UPMA RAM)
|
|
*/
|
|
0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84,
|
|
0xFFAFFC07, /* last */
|
|
_NOT_USED_, _NOT_USED_, _NOT_USED_,
|
|
/*
|
|
* MRS sequence (Offset 38 in UPMA RAM)
|
|
*/
|
|
0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */
|
|
_NOT_USED_,
|
|
/*
|
|
* Exception. (Offset 3c in UPMA RAM)
|
|
*/
|
|
0xFFAFFC04, 0xFFAFFC05, /* last */
|
|
_NOT_USED_, _NOT_USED_,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
|
|
long int initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
volatile iop8xx_t *iop = &immap->im_ioport;
|
|
volatile fec_t *fecp = &immap->im_cpm.cp_fec;
|
|
long int size;
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CFG_MPTPR;
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
|
|
* preliminary addresses - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or2 = CFG_OR2_PRELIM;
|
|
memctl->memc_br2 = CFG_BR2_PRELIM;
|
|
|
|
memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
|
|
udelay (1);
|
|
|
|
memctl->memc_mcr = 0x80004105; /* SDRAM precharge */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */
|
|
udelay (1);
|
|
memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */
|
|
udelay (1);
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*
|
|
*/
|
|
size = dram_size (CFG_MAMR, (long *) SDRAM_BASE_PRELIM,
|
|
SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
|
|
memctl->memc_mamr = CFG_MAMR;
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Final mapping
|
|
*/
|
|
memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR2_PRELIM;
|
|
memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
|
|
|
|
udelay (10000);
|
|
|
|
/* prepare pin multiplexing for fast ethernet */
|
|
|
|
atmLoad ();
|
|
fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */
|
|
iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */
|
|
|
|
|
|
return (size);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base,
|
|
long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size (base, maxsize));
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
void board_serial_init (void)
|
|
{
|
|
; /* nothing to do here */
|
|
}
|
|
|
|
void board_ether_init (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile iop8xx_t *iop = &immap->im_ioport;
|
|
volatile fec_t *fecp = &immap->im_cpm.cp_fec;
|
|
|
|
atmLoad ();
|
|
fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */
|
|
iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */
|
|
}
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
volatile iop8xx_t *iop = &immap->im_ioport;
|
|
|
|
/* configure the LED timing output pins - port A pin 4 */
|
|
iop->iop_papar = 0x0800;
|
|
iop->iop_padir = 0x0800;
|
|
|
|
/* start timer 2 for the 4hz LED blink rate */
|
|
timers->cpmt_tmr2 = 0xff2c; /* 4hz for 64mhz */
|
|
timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */
|
|
timers->cpmt_tgcr = 0x00000810; /* run timer 2 */
|
|
|
|
/* chip select for PLD access */
|
|
memctl->memc_br6 = 0x10000401;
|
|
memctl->memc_or6 = 0xFC000908;
|
|
|
|
/* PLD initial values ( set LEDs, remove reset on LXT) */
|
|
|
|
*PLD_GCR1_REG = 0x06;
|
|
*PLD_EXT_RES = 0xC0;
|
|
*PLD_EXT_FETH = 0x40;
|
|
*PLD_EXT_LED = 0xFF;
|
|
*PLD_EXT_X21 = 0x04;
|
|
return 0;
|
|
}
|
|
|
|
void board_get_enetaddr (uchar * addr)
|
|
{
|
|
int i;
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile cpm8xx_t *cpm = &immap->im_cpm;
|
|
unsigned int rccrtmp;
|
|
|
|
char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 };
|
|
|
|
for (i = 0; i < 6; i++)
|
|
addr[i] = default_mac_addr[i];
|
|
|
|
printf ("There is an error in the i2c driver .. /n");
|
|
printf ("You need to fix it first....../n");
|
|
|
|
rccrtmp = cpm->cp_rccr;
|
|
cpm->cp_rccr |= 0x0020;
|
|
|
|
i2c_reg_read (0xa0, 0);
|
|
printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n",
|
|
i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
|
|
i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
|
|
i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0));
|
|
|
|
cpm->cp_rccr = rccrtmp;
|
|
}
|
|
|