upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
804 lines
24 KiB
804 lines
24 KiB
/*
|
|
* Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
MPC8349E-mITX board configuration file
|
|
|
|
Memory map:
|
|
|
|
0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
|
|
0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
|
|
0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
|
|
0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
|
|
0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
|
|
0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
|
|
0xF000_0000-0xF000_FFFF Compact Flash
|
|
0xF001_0000-0xF001_FFFF Local bus expansion slot
|
|
0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
|
|
0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
|
|
0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
|
|
|
|
I2C address list:
|
|
Align. Board
|
|
Bus Addr Part No. Description Length Location
|
|
----------------------------------------------------------------
|
|
I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64
|
|
|
|
I2C1 0x20 PCF8574 I2C Expander 0 U8
|
|
I2C1 0x21 PCF8574 I2C Expander 0 U10
|
|
I2C1 0x38 PCF8574A I2C Expander 0 U8
|
|
I2C1 0x39 PCF8574A I2C Expander 0 U10
|
|
I2C1 0x51 (DDR) DDR EEPROM 1 U1
|
|
I2C1 0x68 DS1339 RTC 1 U68
|
|
|
|
Note that a given board has *either* a pair of 8574s or a pair of 8574As.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#undef DEBUG
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */
|
|
#define CONFIG_MPC8349 /* MPC8349 specific */
|
|
|
|
#define CONFIG_PCI
|
|
|
|
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
|
|
#define CONFIG_RTC_DS1337
|
|
|
|
/* I2C */
|
|
#define CONFIG_HARD_I2C
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
|
|
#define CONFIG_MISC_INIT_F
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_FSL_I2C
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
#define CONFIG_I2C_CMD_TREE
|
|
#define CFG_I2C_OFFSET 0x3000
|
|
#define CFG_I2C2_OFFSET 0x3100
|
|
#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */
|
|
|
|
#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */
|
|
#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */
|
|
#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */
|
|
#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */
|
|
#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */
|
|
#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/
|
|
#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */
|
|
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
/* Don't probe these addresses: */
|
|
#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \
|
|
{1, CFG_I2C_8574_ADDR2}, \
|
|
{1, CFG_I2C_8574A_ADDR1}, \
|
|
{1, CFG_I2C_8574A_ADDR2}}
|
|
/* Bit definitions for the 8574[A] I2C expander */
|
|
#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
|
|
#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */
|
|
#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */
|
|
#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */
|
|
#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/
|
|
|
|
#undef CONFIG_SOFT_I2C
|
|
|
|
#endif
|
|
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define PCI_66M
|
|
#ifdef PCI_66M
|
|
#define CONFIG_83XX_CLKIN 66666666 /* in Hz */
|
|
#else
|
|
#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_CLK_FREQ
|
|
#ifdef PCI_66M
|
|
#define CONFIG_SYS_CLK_FREQ 66666666
|
|
#else
|
|
#define CONFIG_SYS_CLK_FREQ 33333333
|
|
#endif
|
|
#endif
|
|
|
|
#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */
|
|
|
|
#undef CFG_DRAM_TEST /* memory test, takes time */
|
|
#define CFG_MEMTEST_START 0x00003000 /* memtest region */
|
|
#define CFG_MEMTEST_END 0x07100000 /* only has 128M */
|
|
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
|
#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
|
|
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
|
|
|
|
/*
|
|
* 32-bit data path mode.
|
|
*
|
|
* Please note that using this mode for devices with the real density of 64-bit
|
|
* effectively reduces the amount of available memory due to the effect of
|
|
* wrapping around while translating address to row/columns, for example in the
|
|
* 256MB module the upper 128MB get aliased with contents of the lower
|
|
* 128MB); normally this define should be used for devices with real 32-bit
|
|
* data path.
|
|
*/
|
|
#undef CONFIG_DDR_32BIT
|
|
|
|
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
|
|
#define CFG_SDRAM_BASE CFG_DDR_BASE
|
|
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
|
|
#undef CONFIG_DDR_2T_TIMING
|
|
#define CFG_83XX_DDR_USES_CS0
|
|
|
|
#ifndef CONFIG_SPD_EEPROM
|
|
/*
|
|
* Manually set up DDR parameters
|
|
*/
|
|
#define CFG_DDR_SIZE 256 /* Mb */
|
|
#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
|
|
|
|
#define CFG_DDR_TIMING_1 0x26242321
|
|
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */
|
|
#endif
|
|
|
|
/* FLASH on the Local Bus */
|
|
#define CFG_FLASH_CFI /* use the Common Flash Interface */
|
|
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
|
|
#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
|
|
#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
|
|
#define CFG_FLASH_EMPTY_INFO
|
|
|
|
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
|
|
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
|
|
OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
|
|
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
|
|
#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16Mb window bytes */
|
|
|
|
/* VSC7385 on the Local Bus */
|
|
#define CFG_VSC7385_BASE 0xF8000000 /* start of VSC7385 */
|
|
|
|
#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V)
|
|
#define CFG_OR1_PRELIM (0xFFFE0000 /* 128KB */ | \
|
|
OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
|
|
OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
|
|
#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE /* Access window base at VSC7385 base */
|
|
#define CFG_LBLAWAR1_PRELIM 0x80000010 /* Access window size 128K */
|
|
|
|
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
|
|
#define CFG_MAX_FLASH_SECT 135 /* sectors per device */
|
|
|
|
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
|
|
|
|
#undef CFG_FLASH_CHECKSUM
|
|
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
#define CFG_LED_BASE 0xF9000000 /* start of LED and Board ID */
|
|
#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V)
|
|
#define CFG_OR2_PRELIM (0xFFE00000 /* 2MB */ | \
|
|
OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
|
|
OR_GPCM_SCY_9 | \
|
|
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
|
|
#ifdef CONFIG_COMPACT_FLASH
|
|
|
|
#define CFG_CF_BASE 0xF0000000
|
|
|
|
#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
|
|
#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI)
|
|
|
|
#define CFG_LBLAWBAR2_PRELIM CFG_CF_BASE /* Window base at flash base + LED & Board ID */
|
|
#define CFG_LBLAWAR2_PRELIM 0x8000000F /* 64K bytes */
|
|
|
|
#undef CONFIG_IDE_RESET
|
|
#undef CONFIG_IDE_PREINIT
|
|
|
|
#define CFG_IDE_MAXBUS 1
|
|
#define CFG_IDE_MAXDEVICE 1
|
|
|
|
#define CFG_ATA_IDE0_OFFSET 0x0000
|
|
#define CFG_ATA_BASE_ADDR CFG_CF_BASE
|
|
#define CFG_ATA_DATA_OFFSET 0x0000
|
|
#define CFG_ATA_REG_OFFSET 0
|
|
#define CFG_ATA_ALT_OFFSET 0x0200
|
|
#define CFG_ATA_STRIDE 2
|
|
|
|
#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */
|
|
|
|
#endif
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CFG_MID_FLASH_JUMP 0x7F000000
|
|
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
|
|
|
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
#define CFG_RAMBOOT
|
|
#else
|
|
#undef CFG_RAMBOOT
|
|
#endif
|
|
|
|
#define CONFIG_L1_INIT_RAM
|
|
#define CFG_INIT_RAM_LOCK
|
|
#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
|
|
#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
|
|
|
|
#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
|
|
|
/*
|
|
* Local Bus LCRR and LBCR regs
|
|
* LCRR: DLL bypass, Clock divider is 4
|
|
* External Local Bus rate is
|
|
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
|
|
*/
|
|
#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
|
|
#define CFG_LBC_LBCR 0x00000000
|
|
|
|
#undef CFG_LB_SDRAM /* if board has SRDAM on local bus */
|
|
|
|
#ifdef CFG_LB_SDRAM
|
|
/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
|
|
/*
|
|
* Base Register 2 and Option Register 2 configure SDRAM.
|
|
* The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
|
|
*
|
|
* For BR2, need:
|
|
* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
|
|
* port-size = 32-bits = BR2[19:20] = 11
|
|
* no parity checking = BR2[21:22] = 00
|
|
* SDRAM for MSEL = BR2[24:26] = 011
|
|
* Valid = BR[31] = 1
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
|
|
*/
|
|
|
|
#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
|
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
|
|
|
#define CFG_LBLAWBAR2_PRELIM 0xF0000000
|
|
#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */
|
|
|
|
#define CFG_BR2_PRELIM (CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
|
|
#define CFG_OR2_PRELIM (0xFC000000 /* 64 MB */ | \
|
|
OR_SDRAM_XAM | \
|
|
((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
|
|
((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
|
|
OR_SDRAM_EAD)
|
|
|
|
#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
|
|
#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/
|
|
|
|
/*
|
|
* LSDMR masks
|
|
*/
|
|
#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
|
|
#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
|
|
#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
|
|
#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
|
|
#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16))
|
|
#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
|
|
#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
|
|
#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19))
|
|
#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
|
|
#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
|
|
#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
|
|
#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
|
|
#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
|
|
#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
|
|
#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27))
|
|
#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
|
|
#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
|
|
#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
|
|
|
|
#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \
|
|
| CFG_LBC_LSDMR_BSMA1516 \
|
|
| CFG_LBC_LSDMR_RFCR8 \
|
|
| CFG_LBC_LSDMR_PRETOACT6 \
|
|
| CFG_LBC_LSDMR_ACTTORW3 \
|
|
| CFG_LBC_LSDMR_BL8 \
|
|
| CFG_LBC_LSDMR_WRC3 \
|
|
| CFG_LBC_LSDMR_CL3 \
|
|
)
|
|
|
|
/*
|
|
* SDRAM Controller configuration sequence.
|
|
*/
|
|
#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
|
|
| CFG_LBC_LSDMR_OP_PCHALL)
|
|
#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
|
|
| CFG_LBC_LSDMR_OP_ARFRSH)
|
|
#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
|
|
| CFG_LBC_LSDMR_OP_ARFRSH)
|
|
#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
|
|
| CFG_LBC_LSDMR_OP_MRW)
|
|
#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
|
|
| CFG_LBC_LSDMR_OP_NORMAL)
|
|
#endif
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#define CONFIG_CONS_INDEX 1
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
#define CFG_NS16550_CLK get_bus_freq(0)
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
|
|
|
#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
|
|
#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
|
|
|
|
/* Use the HUSH parser */
|
|
#define CFG_HUSH_PARSER
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
/* pass open firmware flat tree */
|
|
#define CONFIG_OF_FLAT_TREE 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
/* maximum size of the flat tree (8K) */
|
|
#define OF_FLAT_TREE_MAX_SIZE 8192
|
|
|
|
#define OF_CPU "PowerPC,8349@0"
|
|
#define OF_SOC "soc8349@e0000000"
|
|
#define OF_TBCLK (bd->bi_busfreq / 4)
|
|
#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
#define CONFIG_MPC83XX_PCI2
|
|
|
|
/*
|
|
* General PCI
|
|
* Addresses are mapped 1-1.
|
|
*/
|
|
#define CFG_PCI1_MEM_BASE 0x80000000
|
|
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
|
#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
|
|
#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
|
|
#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI1_IO_BASE 0x00000000
|
|
#define CFG_PCI1_IO_PHYS 0xE2000000
|
|
#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */
|
|
|
|
#ifdef CONFIG_MPC83XX_PCI2
|
|
#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
|
|
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
|
|
#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
|
|
#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE
|
|
#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI2_IO_BASE 0x00000000
|
|
#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
|
|
#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
|
|
#endif
|
|
|
|
#define _IO_BASE 0x00000000 /* points to PCI I/O space */
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
#ifdef CONFIG_RTL8139
|
|
/* This macro is used by RTL8139 but not defined in PPC architecture */
|
|
#define KSEG1ADDR(x) (x)
|
|
#endif
|
|
|
|
#ifndef CONFIG_PCI_PNP
|
|
#define PCI_ENET0_IOADDR 0x00000000
|
|
#define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE
|
|
#define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */
|
|
#endif
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
|
|
#endif
|
|
|
|
/* TSEC */
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
|
|
#ifndef CONFIG_NET_MULTI
|
|
#define CONFIG_NET_MULTI
|
|
#endif
|
|
|
|
#define CONFIG_MII
|
|
#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */
|
|
|
|
#define CONFIG_MPC83XX_TSEC1
|
|
|
|
#ifdef CONFIG_MPC83XX_TSEC1
|
|
#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0"
|
|
#define CFG_TSEC1_OFFSET 0x24000
|
|
#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */
|
|
#define TSEC1_PHYIDX 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC83XX_TSEC2
|
|
#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1"
|
|
#define CFG_TSEC2_OFFSET 0x25000
|
|
#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */
|
|
#define TSEC2_PHY_ADDR 4
|
|
#define TSEC2_PHYIDX 0
|
|
#endif
|
|
|
|
#define CONFIG_ETHPRIME "Freescale TSEC"
|
|
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#ifndef CFG_RAMBOOT
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
|
#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
|
|
#define CFG_ENV_SIZE 0x2000
|
|
#else
|
|
#define CFG_NO_FLASH /* Flash is not usable now */
|
|
#define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
|
#define CFG_ENV_SIZE 0x2000
|
|
#endif
|
|
|
|
#define CONFIG_LOADS_ECHO /* echo on for serial download */
|
|
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
|
|
|
|
/* CONFIG_COMMANDS */
|
|
|
|
#ifdef CONFIG_COMPACT_FLASH
|
|
#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT)
|
|
#else
|
|
#define CONFIG_COMMANDS_CF 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_COMMANDS_PCI CFG_CMD_PCI
|
|
#else
|
|
#define CONFIG_COMMANDS_PCI 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
|
|
#else
|
|
#define CONFIG_COMMANDS_I2C 0
|
|
#endif
|
|
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
|
CONFIG_COMMANDS_CF | \
|
|
CFG_CMD_NET | \
|
|
CFG_CMD_PING | \
|
|
CONFIG_COMMANDS_I2C | \
|
|
CONFIG_COMMANDS_PCI | \
|
|
CFG_CMD_SDRAM | \
|
|
CFG_CMD_DATE | \
|
|
CFG_CMD_CACHE | \
|
|
CFG_CMD_IRQ)
|
|
#include <cmd_confdefs.h>
|
|
|
|
/* Watchdog */
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
#ifdef CONFIG_WATCHDOG
|
|
#define CFG_WATCHDOG_VALUE 0xFFFFFFC3
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
|
|
#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
|
|
|
/* Cache Configuration */
|
|
#define CFG_DCACHE_SIZE 32768
|
|
#define CFG_CACHELINE_SIZE 32
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */
|
|
#endif
|
|
|
|
#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */
|
|
|
|
#define CFG_HRCW_LOW (\
|
|
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
|
HRCWL_DDR_TO_SCB_CLK_1X1 |\
|
|
HRCWL_CSB_TO_CLKIN_4X1 |\
|
|
HRCWL_VCO_1X2 |\
|
|
HRCWL_CORE_TO_CSB_2X1)
|
|
|
|
#ifdef PCI_64BIT
|
|
#define CFG_HRCW_HIGH (\
|
|
HRCWH_PCI_HOST |\
|
|
HRCWH_64_BIT_PCI |\
|
|
HRCWH_PCI1_ARBITER_ENABLE |\
|
|
HRCWH_PCI2_ARBITER_DISABLE |\
|
|
HRCWH_CORE_ENABLE |\
|
|
HRCWH_FROM_0X00000100 |\
|
|
HRCWH_BOOTSEQ_DISABLE |\
|
|
HRCWH_SW_WATCHDOG_DISABLE |\
|
|
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
|
HRCWH_TSEC1M_IN_GMII |\
|
|
HRCWH_TSEC2M_IN_GMII )
|
|
#else
|
|
#define CFG_HRCW_HIGH (\
|
|
HRCWH_PCI_HOST |\
|
|
HRCWH_32_BIT_PCI |\
|
|
HRCWH_PCI1_ARBITER_ENABLE |\
|
|
HRCWH_PCI2_ARBITER_DISABLE |\
|
|
HRCWH_CORE_ENABLE |\
|
|
HRCWH_FROM_0XFFF00100 |\
|
|
HRCWH_BOOTSEQ_DISABLE |\
|
|
HRCWH_SW_WATCHDOG_DISABLE |\
|
|
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
|
HRCWH_TSEC1M_IN_GMII |\
|
|
HRCWH_TSEC2M_IN_GMII )
|
|
#endif
|
|
|
|
/* System performance */
|
|
#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
|
|
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
|
|
#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
|
|
#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
|
|
#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
|
|
#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
|
|
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count */
|
|
|
|
/* System IO Config */
|
|
#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */
|
|
#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
|
|
|
|
#define CFG_HID0_INIT 0x000000000
|
|
|
|
#define CFG_HID0_FINAL CFG_HID0_INIT
|
|
|
|
#define CFG_HID2 HID2_HBE
|
|
|
|
/* DDR @ 0x00000000 */
|
|
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* PCI @ 0x80000000 */
|
|
#ifdef CONFIG_PCI
|
|
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#else
|
|
#define CFG_IBAT1L 0
|
|
#define CFG_IBAT1U 0
|
|
#define CFG_IBAT2L 0
|
|
#define CFG_IBAT2U 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC83XX_PCI2
|
|
#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#else
|
|
#define CFG_IBAT3L 0
|
|
#define CFG_IBAT3U 0
|
|
#define CFG_IBAT4L 0
|
|
#define CFG_IBAT4U 0
|
|
#endif
|
|
|
|
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
|
|
#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
|
|
#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT7L 0
|
|
#define CFG_IBAT7U 0
|
|
|
|
#define CFG_DBAT0L CFG_IBAT0L
|
|
#define CFG_DBAT0U CFG_IBAT0U
|
|
#define CFG_DBAT1L CFG_IBAT1L
|
|
#define CFG_DBAT1U CFG_IBAT1U
|
|
#define CFG_DBAT2L CFG_IBAT2L
|
|
#define CFG_DBAT2U CFG_IBAT2U
|
|
#define CFG_DBAT3L CFG_IBAT3L
|
|
#define CFG_DBAT3U CFG_IBAT3U
|
|
#define CFG_DBAT4L CFG_IBAT4L
|
|
#define CFG_DBAT4U CFG_IBAT4U
|
|
#define CFG_DBAT5L CFG_IBAT5L
|
|
#define CFG_DBAT5U CFG_IBAT5U
|
|
#define CFG_DBAT6L CFG_IBAT6L
|
|
#define CFG_DBAT6U CFG_IBAT6U
|
|
#define CFG_DBAT7L CFG_IBAT7L
|
|
#define CFG_DBAT7U CFG_IBAT7U
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#ifdef CONFIG_MPC83XX_TSEC1
|
|
#define CONFIG_ETHADDR 00:E0:0C:00:8C:01
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC83XX_TSEC2
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02
|
|
#endif
|
|
|
|
#if 1
|
|
#define CONFIG_IPADDR 10.82.19.159
|
|
#define CONFIG_SERVERIP 10.82.48.106
|
|
#define CONFIG_GATEWAYIP 10.82.19.254
|
|
#define CONFIG_NETMASK 255.255.252.0
|
|
#define CONFIG_NETDEV eth0
|
|
|
|
#define CONFIG_HOSTNAME mpc8349emitx
|
|
#define CONFIG_ROOTPATH /nfsroot0/u/timur/itx-ltib/rootfs
|
|
#define CONFIG_BOOTFILE timur/uImage
|
|
|
|
#define CONFIG_UBOOTPATH timur/u-boot.bin
|
|
#else
|
|
#define CONFIG_IPADDR 192.168.1.253
|
|
#define CONFIG_SERVERIP 192.168.1.1
|
|
#define CONFIG_GATEWAYIP 192.168.1.1
|
|
#define CONFIG_NETMASK 255.255.252.0
|
|
#define CONFIG_NETDEV eth0
|
|
|
|
#define CONFIG_HOSTNAME mpc8349emitx
|
|
#define CONFIG_ROOTPATH /nfsroot/rootfs
|
|
#define CONFIG_BOOTFILE uImage
|
|
|
|
#define CONFIG_UBOOTPATH u-boot.bin
|
|
#endif
|
|
|
|
#define CONFIG_UBOOTSTART fe700000
|
|
#define CONFIG_UBOOTEND fe77ffff
|
|
|
|
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#undef CONFIG_BOOTCOMMAND
|
|
#ifdef CONFIG_BOOTCOMMAND
|
|
#define CONFIG_BOOTDELAY 6
|
|
#else
|
|
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
|
|
#endif
|
|
|
|
#define XMK_STR(x) #x
|
|
#define MK_STR(x) XMK_STR(x)
|
|
|
|
#define CONFIG_BOOTARGS \
|
|
"root=/dev/nfs rw" \
|
|
" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
|
|
" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
|
|
MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
|
|
MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
|
|
" console=ttyS0," MK_STR(CONFIG_BAUDRATE)
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
|
|
"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
|
|
"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
|
|
"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
|
|
"cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
|
|
"tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
|
|
"protect off FEF00000 FEF7FFFF; " \
|
|
"erase FEF00000 FEF7FFFF; " \
|
|
"cp.b $loadaddr FEF00000 $filesize; " \
|
|
"protect on FEF00000 FEF7FFFF; " \
|
|
"cmp.b $loadaddr FEF00000 $filesize\0" \
|
|
"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
|
|
"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
|
|
"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0" \
|
|
"fdtaddr=400000\0" \
|
|
"fdtfile=mpc8349emitx.dtb\0" \
|
|
""
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
|
|
#undef MK_STR
|
|
#undef XMK_STR
|
|
|
|
#endif
|
|
|