upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/dts/rk3368-sheep.dts

287 lines
5.6 KiB

/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "rk3368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Rockchip sheep board";
compatible = "rockchip,sheep", "rockchip,rk3368";
chosen {
stdout-path = "serial2:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
ext_gmac: gmac-clk {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
#clock-cells = <0>;
};
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
power {
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
wakeup-source;
};
};
leds: gpio-leds {
compatible = "gpio-leds";
blue {
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
label = "geekbox:blue:led";
default-state = "on";
};
red {
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
label = "geekbox:red:led";
default-state = "off";
};
};
vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
};
&emmc {
status = "okay";
bus-width = <8>;
cap-mmc-highspeed;
clock-frequency = <150000000>;
disable-wp;
keep-power-in-suspend;
non-removable;
num-slots = <1>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc18_flash>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
};
&gmac {
status = "okay";
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
clock_in_out = "input";
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
};
&i2c0 {
status = "okay";
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
interrupt-parent = <&gpio0>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_sys>;
vcc10-supply = <&vcc_sys>;
vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc_io>;
clock-output-names = "xin32k", "rk808-clkout2";
#clock-cells = <1>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vdd_cpu";
};
vdd_log: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vdd_log";
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
};
vcc18_flash: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_flash";
};
vcc33_lcd: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33_lcd";
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
};
vcca_18: LDO_REG4 {
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca_18";
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
};
vdd10_lcd: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
};
vcc_18: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
};
vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
};
vcc_sd: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_sd";
};
vcc_lan: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lan";
};
};
};
};
&pinctrl {
ir {
ir_int: ir-int {
rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
keys {
pwr_key: pwr-key {
rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_sleep: pmic-sleep {
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
};
pmic_int: pmic-int {
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&saradc {
status = "okay";
};
&tsadc {
status = "okay";
rockchip,hw-tshut-mode = <0>; /* CRU */
rockchip,hw-tshut-polarity = <1>; /* high */
};
&uart4 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};