upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c

67 lines
1.5 KiB

/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/arch/wdt.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
void reset_cpu(ulong addr)
{
/* Enable watchdog clock */
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
/* Reset pulse length is 13005 peripheral clock frames */
writel(13000, &wdt->pulse);
/* Force WDOG_RESET2 and RESOUT_N signal active */
writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
&wdt->mctrl);
while (1)
/* NOP */;
}
#if defined(CONFIG_ARCH_CPU_INIT)
int arch_cpu_init(void)
{
/*
* It might be necessary to flush data cache, if U-boot is loaded
* from kickstart bootloader, e.g. from S1L loader
*/
flush_dcache_all();
return 0;
}
#else
#error "You have to select CONFIG_ARCH_CPU_INIT"
#endif
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
printf("CPU: NXP LPC32XX\n");
printf("CPU clock: %uMHz\n", get_hclk_pll_rate() / 1000000);
printf("AHB bus clock: %uMHz\n", get_hclk_clk_rate() / 1000000);
printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
return 0;
}
#endif
#ifdef CONFIG_LPC32XX_ETH
int cpu_eth_init(bd_t *bis)
{
lpc32xx_eth_initialize(bis);
return 0;
}
#endif