upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
589 lines
15 KiB
589 lines
15 KiB
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
********************************************************************
|
|
*
|
|
* Lots of code copied from:
|
|
*
|
|
* i82365.c 1.352 - Linux driver for Intel 82365 and compatible
|
|
* PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
|
|
* (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#ifdef CONFIG_I82365
|
|
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <pcmcia.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <pcmcia/ss.h>
|
|
#include <pcmcia/i82365.h>
|
|
#include <pcmcia/ti113x.h>
|
|
#include <pcmcia/yenta.h>
|
|
|
|
/* #define DEBUG */
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510},
|
|
{0, 0}
|
|
};
|
|
|
|
#define CYCLE_TIME 120
|
|
|
|
#ifdef DEBUG
|
|
static void i82365_dump_regions (pci_dev_t dev);
|
|
#endif
|
|
|
|
typedef struct socket_info_t {
|
|
pci_dev_t dev;
|
|
u_short bcr;
|
|
u_char pci_lat, cb_lat, sub_bus, cache;
|
|
u_int cb_phys;
|
|
|
|
socket_cap_t cap;
|
|
ti113x_state_t state;
|
|
} socket_info_t;
|
|
|
|
static socket_info_t socket;
|
|
static socket_state_t state;
|
|
static struct pccard_mem_map mem;
|
|
static struct pccard_io_map io;
|
|
|
|
/*====================================================================*/
|
|
|
|
/* Some PCI shortcuts */
|
|
|
|
static int pci_readb (socket_info_t * s, int r, u_char * v)
|
|
{
|
|
return pci_read_config_byte (s->dev, r, v);
|
|
}
|
|
static int pci_writeb (socket_info_t * s, int r, u_char v)
|
|
{
|
|
return pci_write_config_byte (s->dev, r, v);
|
|
}
|
|
static int pci_readw (socket_info_t * s, int r, u_short * v)
|
|
{
|
|
return pci_read_config_word (s->dev, r, v);
|
|
}
|
|
static int pci_writew (socket_info_t * s, int r, u_short v)
|
|
{
|
|
return pci_write_config_word (s->dev, r, v);
|
|
}
|
|
static int pci_readl (socket_info_t * s, int r, u_int * v)
|
|
{
|
|
return pci_read_config_dword (s->dev, r, v);
|
|
}
|
|
static int pci_writel (socket_info_t * s, int r, u_int v)
|
|
{
|
|
return pci_write_config_dword (s->dev, r, v);
|
|
}
|
|
|
|
#define cb_readb(s, r) readb((s)->cb_phys + (r))
|
|
#define cb_readl(s, r) readl((s)->cb_phys + (r))
|
|
#define cb_writeb(s, r, v) writeb(v, (s)->cb_phys + (r))
|
|
#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r))
|
|
|
|
/*====================================================================*/
|
|
|
|
static u_char i365_get (socket_info_t * s, u_short reg)
|
|
{
|
|
return cb_readb (s, 0x0800 + reg);
|
|
}
|
|
|
|
static void i365_set (socket_info_t * s, u_short reg, u_char data)
|
|
{
|
|
cb_writeb (s, 0x0800 + reg, data);
|
|
}
|
|
|
|
static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
|
|
{
|
|
i365_set (s, reg, i365_get (s, reg) | mask);
|
|
}
|
|
|
|
static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
|
|
{
|
|
i365_set (s, reg, i365_get (s, reg) & ~mask);
|
|
}
|
|
|
|
#if 0 /* not used */
|
|
static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
|
|
{
|
|
u_char d = i365_get (s, reg);
|
|
|
|
i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
|
|
}
|
|
|
|
static u_short i365_get_pair (socket_info_t * s, u_short reg)
|
|
{
|
|
return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
|
|
}
|
|
#endif /* not used */
|
|
|
|
static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
|
|
{
|
|
i365_set (s, reg, data & 0xff);
|
|
i365_set (s, reg + 1, data >> 8);
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Code to save and restore global state information for TI 1130 and
|
|
TI 1131 controllers, and to set and report global configuration
|
|
options.
|
|
|
|
======================================================================*/
|
|
|
|
static void ti113x_get_state (socket_info_t * s)
|
|
{
|
|
ti113x_state_t *p = &s->state;
|
|
|
|
pci_readl (s, TI113X_SYSTEM_CONTROL, &p->sysctl);
|
|
pci_readb (s, TI113X_CARD_CONTROL, &p->cardctl);
|
|
pci_readb (s, TI113X_DEVICE_CONTROL, &p->devctl);
|
|
pci_readb (s, TI1250_DIAGNOSTIC, &p->diag);
|
|
pci_readl (s, TI12XX_IRQMUX, &p->irqmux);
|
|
}
|
|
|
|
static void ti113x_set_state (socket_info_t * s)
|
|
{
|
|
ti113x_state_t *p = &s->state;
|
|
|
|
pci_writel (s, TI113X_SYSTEM_CONTROL, p->sysctl);
|
|
pci_writeb (s, TI113X_CARD_CONTROL, p->cardctl);
|
|
pci_writeb (s, TI113X_DEVICE_CONTROL, p->devctl);
|
|
pci_writeb (s, TI1250_MULTIMEDIA_CTL, 0);
|
|
pci_writeb (s, TI1250_DIAGNOSTIC, p->diag);
|
|
pci_writel (s, TI12XX_IRQMUX, p->irqmux);
|
|
i365_set_pair (s, TI113X_IO_OFFSET (0), 0);
|
|
i365_set_pair (s, TI113X_IO_OFFSET (1), 0);
|
|
}
|
|
|
|
static u_int ti113x_set_opts (socket_info_t * s)
|
|
{
|
|
ti113x_state_t *p = &s->state;
|
|
u_int mask = 0xffff;
|
|
|
|
p->cardctl &= ~TI113X_CCR_ZVENABLE;
|
|
p->cardctl |= TI113X_CCR_SPKROUTEN;
|
|
|
|
return mask;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Routines to handle common CardBus options
|
|
|
|
======================================================================*/
|
|
|
|
/* Default settings for PCI command configuration register */
|
|
#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
|
|
PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
|
|
|
|
static void cb_get_state (socket_info_t * s)
|
|
{
|
|
pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
|
|
pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
|
|
pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
|
|
pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
|
|
pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
|
|
pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
|
|
}
|
|
|
|
static void cb_set_state (socket_info_t * s)
|
|
{
|
|
pci_writel (s, CB_LEGACY_MODE_BASE, 0);
|
|
pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys);
|
|
pci_writew (s, PCI_COMMAND, CMD_DFLT);
|
|
pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
|
|
pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
|
|
pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
|
|
pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
|
|
pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
|
|
pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
|
|
}
|
|
|
|
static void cb_set_opts (socket_info_t * s)
|
|
{
|
|
if (s->cache == 0)
|
|
s->cache = 8;
|
|
if (s->pci_lat == 0)
|
|
s->pci_lat = 0xa8;
|
|
if (s->cb_lat == 0)
|
|
s->cb_lat = 0xb0;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Power control for Cardbus controllers: used both for 16-bit and
|
|
Cardbus cards.
|
|
|
|
======================================================================*/
|
|
|
|
static int cb_set_power (socket_info_t * s, socket_state_t * state)
|
|
{
|
|
u_int reg = 0;
|
|
|
|
/* restart card voltage detection if it seems appropriate */
|
|
if ((state->Vcc == 0) && (state->Vpp == 0) &&
|
|
!(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE))
|
|
cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST);
|
|
switch (state->Vcc) {
|
|
case 0:
|
|
reg = 0;
|
|
break;
|
|
case 33:
|
|
reg = CB_SC_VCC_3V;
|
|
break;
|
|
case 50:
|
|
reg = CB_SC_VCC_5V;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
switch (state->Vpp) {
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
reg |= CB_SC_VPP_3V;
|
|
break;
|
|
case 50:
|
|
reg |= CB_SC_VPP_5V;
|
|
break;
|
|
case 120:
|
|
reg |= CB_SC_VPP_12V;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
if (reg != cb_readl (s, CB_SOCKET_CONTROL))
|
|
cb_writel (s, CB_SOCKET_CONTROL, reg);
|
|
return 0;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Generic routines to get and set controller options
|
|
|
|
======================================================================*/
|
|
|
|
static void get_bridge_state (socket_info_t * s)
|
|
{
|
|
ti113x_get_state (s);
|
|
cb_get_state (s);
|
|
}
|
|
|
|
static void set_bridge_state (socket_info_t * s)
|
|
{
|
|
cb_set_state (s);
|
|
i365_set (s, I365_GBLCTL, 0x00);
|
|
i365_set (s, I365_GENCTL, 0x00);
|
|
ti113x_set_state (s);
|
|
}
|
|
|
|
static void set_bridge_opts (socket_info_t * s)
|
|
{
|
|
ti113x_set_opts (s);
|
|
cb_set_opts (s);
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static int i365_get_status (socket_info_t * s, u_int * value)
|
|
{
|
|
u_int status;
|
|
|
|
status = i365_get (s, I365_STATUS);
|
|
*value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
|
|
if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
|
|
*value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
|
|
} else {
|
|
*value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
|
|
*value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
|
|
}
|
|
*value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
|
|
*value |= (status & I365_CS_READY) ? SS_READY : 0;
|
|
*value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
|
|
|
|
status = cb_readl (s, CB_SOCKET_STATE);
|
|
*value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0;
|
|
*value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0;
|
|
*value |= (status & CB_SS_XVCARD) ? SS_XVCARD : 0;
|
|
*value |= (status & CB_SS_VSENSE) ? 0 : SS_PENDING;
|
|
/* For now, ignore cards with unsupported voltage keys */
|
|
if (*value & SS_XVCARD)
|
|
*value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD);
|
|
|
|
return 0;
|
|
} /* i365_get_status */
|
|
|
|
static int i365_set_socket (socket_info_t * s, socket_state_t * state)
|
|
{
|
|
u_char reg;
|
|
|
|
set_bridge_state (s);
|
|
|
|
/* IO card, RESET flag */
|
|
reg = 0;
|
|
reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
|
|
reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
|
|
i365_set (s, I365_INTCTL, reg);
|
|
|
|
reg = I365_PWR_NORESET;
|
|
if (state->flags & SS_PWR_AUTO)
|
|
reg |= I365_PWR_AUTO;
|
|
if (state->flags & SS_OUTPUT_ENA)
|
|
reg |= I365_PWR_OUT;
|
|
|
|
cb_set_power (s, state);
|
|
reg |= i365_get (s, I365_POWER) & (I365_VCC_MASK | I365_VPP1_MASK);
|
|
|
|
if (reg != i365_get (s, I365_POWER))
|
|
i365_set (s, I365_POWER, reg);
|
|
|
|
return 0;
|
|
} /* i365_set_socket */
|
|
|
|
/*====================================================================*/
|
|
|
|
static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
|
|
{
|
|
u_short base, i;
|
|
u_char map;
|
|
|
|
map = mem->map;
|
|
if ((map > 4) ||
|
|
(mem->card_start > 0x3ffffff) ||
|
|
(mem->sys_start > mem->sys_stop) ||
|
|
(mem->speed > 1000)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Turn off the window before changing anything */
|
|
if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
|
|
i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
|
|
|
|
/* Take care of high byte, for PCI controllers */
|
|
i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
|
|
|
|
base = I365_MEM (map);
|
|
i = (mem->sys_start >> 12) & 0x0fff;
|
|
if (mem->flags & MAP_16BIT)
|
|
i |= I365_MEM_16BIT;
|
|
if (mem->flags & MAP_0WS)
|
|
i |= I365_MEM_0WS;
|
|
i365_set_pair (s, base + I365_W_START, i);
|
|
|
|
i = (mem->sys_stop >> 12) & 0x0fff;
|
|
switch (mem->speed / CYCLE_TIME) {
|
|
case 0:
|
|
break;
|
|
case 1:
|
|
i |= I365_MEM_WS0;
|
|
break;
|
|
case 2:
|
|
i |= I365_MEM_WS1;
|
|
break;
|
|
default:
|
|
i |= I365_MEM_WS1 | I365_MEM_WS0;
|
|
break;
|
|
}
|
|
i365_set_pair (s, base + I365_W_STOP, i);
|
|
|
|
i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff;
|
|
if (mem->flags & MAP_WRPROT)
|
|
i |= I365_MEM_WRPROT;
|
|
if (mem->flags & MAP_ATTRIB)
|
|
i |= I365_MEM_REG;
|
|
i365_set_pair (s, base + I365_W_OFF, i);
|
|
|
|
/* Turn on the window if necessary */
|
|
if (mem->flags & MAP_ACTIVE)
|
|
i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
|
|
return 0;
|
|
} /* i365_set_mem_map */
|
|
|
|
static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
|
|
{
|
|
u_char map, ioctl;
|
|
|
|
map = io->map;
|
|
if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
|
|
(io->stop < io->start))
|
|
return -1;
|
|
/* Turn off the window before changing anything */
|
|
if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
|
|
i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
|
|
i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
|
|
i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
|
|
ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
|
|
if (io->speed)
|
|
ioctl |= I365_IOCTL_WAIT (map);
|
|
if (io->flags & MAP_0WS)
|
|
ioctl |= I365_IOCTL_0WS (map);
|
|
if (io->flags & MAP_16BIT)
|
|
ioctl |= I365_IOCTL_16BIT (map);
|
|
if (io->flags & MAP_AUTOSZ)
|
|
ioctl |= I365_IOCTL_IOCS16 (map);
|
|
i365_set (s, I365_IOCTL, ioctl);
|
|
/* Turn on the window if necessary */
|
|
if (io->flags & MAP_ACTIVE)
|
|
i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
|
|
return 0;
|
|
} /* i365_set_io_map */
|
|
|
|
/*====================================================================*/
|
|
|
|
int i82365_init (void)
|
|
{
|
|
u_int val;
|
|
int i;
|
|
|
|
if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
|
|
/* Controller not found */
|
|
return 1;
|
|
}
|
|
|
|
pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys);
|
|
socket.cb_phys &= ~0xf;
|
|
|
|
get_bridge_state (&socket);
|
|
set_bridge_opts (&socket);
|
|
|
|
i365_get_status (&socket, &val);
|
|
|
|
if (val & SS_DETECT) {
|
|
if (val & SS_3VCARD) {
|
|
state.Vcc = state.Vpp = 33;
|
|
puts (" 3.3V card found: ");
|
|
} else if (!(val & SS_XVCARD)) {
|
|
state.Vcc = state.Vpp = 50;
|
|
puts (" 5.0V card found: ");
|
|
} else {
|
|
printf ("i82365: unsupported voltage key\n");
|
|
state.Vcc = state.Vpp = 0;
|
|
}
|
|
} else {
|
|
/* No card inserted */
|
|
return 1;
|
|
}
|
|
|
|
state.flags = SS_IOCARD | SS_OUTPUT_ENA;
|
|
state.csc_mask = 0;
|
|
state.io_irq = 0;
|
|
|
|
i365_set_socket (&socket, &state);
|
|
|
|
for (i = 500; i; i--) {
|
|
if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
|
|
break;
|
|
udelay (1000);
|
|
}
|
|
|
|
if (i == 0) {
|
|
/* PC Card not ready for data transfer */
|
|
return 1;
|
|
}
|
|
|
|
mem.map = 0;
|
|
mem.flags = MAP_ATTRIB | MAP_ACTIVE;
|
|
mem.speed = 300;
|
|
mem.sys_start = CFG_PCMCIA_MEM_ADDR;
|
|
mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
|
|
mem.card_start = 0;
|
|
|
|
i365_set_mem_map (&socket, &mem);
|
|
|
|
io.map = 0;
|
|
io.flags = MAP_AUTOSZ | MAP_ACTIVE;
|
|
io.speed = 0;
|
|
io.start = 0x0100;
|
|
io.stop = 0x010F;
|
|
|
|
i365_set_io_map (&socket, &io);
|
|
|
|
#ifdef DEBUG
|
|
i82365_dump_regions (socket.dev);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void i82365_exit (void)
|
|
{
|
|
io.map = 0;
|
|
io.flags = 0;
|
|
io.speed = 0;
|
|
io.start = 0;
|
|
io.stop = 0x1;
|
|
|
|
i365_set_io_map (&socket, &io);
|
|
|
|
mem.map = 0;
|
|
mem.flags = 0;
|
|
mem.speed = 0;
|
|
mem.sys_start = 0;
|
|
mem.sys_stop = 0x1000;
|
|
mem.card_start = 0;
|
|
|
|
i365_set_mem_map (&socket, &mem);
|
|
|
|
socket.state.sysctl &= 0xFFFF00FF;
|
|
|
|
state.Vcc = state.Vpp = 0;
|
|
|
|
i365_set_socket (&socket, &state);
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Debug stuff
|
|
|
|
======================================================================*/
|
|
|
|
#ifdef DEBUG
|
|
static void i82365_dump_regions (pci_dev_t dev)
|
|
{
|
|
u_int tmp[2];
|
|
u_int *mem = (void *) sock.cb_phys;
|
|
u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
|
|
u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
|
|
|
|
pci_read_config_dword (dev, 0x00, tmp + 0);
|
|
pci_read_config_dword (dev, 0x80, tmp + 1);
|
|
|
|
printf ("PCI CONF: %08X ... %08X\n", tmp[0], tmp[1]);
|
|
printf ("PCI MEM: ... %08X ... %08X\n", mem[0x8 / 4], mem[0x800 / 4]);
|
|
printf ("CIS: ...%c%c%c%c%c%c%c%c...\n",
|
|
cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
|
|
cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
|
|
printf ("CIS CONF: %02X %02X %02X ...\n",
|
|
cis[0x200], cis[0x202], cis[0x204]);
|
|
printf ("IDE: %02X %02X %02X %02X %02X %02X %02X %02X\n",
|
|
ide[0], ide[1], ide[2], ide[3],
|
|
ide[4], ide[5], ide[6], ide[7]);
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
#endif /* CONFIG_I82365 */
|
|
|