upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/h2_p2_dbg_board.h

138 lines
5.7 KiB

/*
*
* BRIEF MODULE DESCRIPTION
* TI H2 and P2 Debug Board hardware map
*
* Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
* Author: MPC-Data Limited
* Dave Peverley
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __INCLUDED_H2_P2_DBH_BOARD_H
#define __INCLUDED_H2_P2_DBH_BOARD_H
#include <asm/sizes.h>
/*
* The Debug board is designed to function with the P2 Sample, H2
* Sample and 1610 Innovator boards. The main difference AFAICT is
* the chip selects used with each system ;
*
* P2 Sample : CS1 of OMAP730 is used to select the CPLD & LAN regs
* H2 Sample : CS1a is used to select the CPLD registers.
*
*/
/***************************************************************************
* CPLD Registers
**************************************************************************/
#define H2DBG_CPLD_REVISION 0x04000010
#define H2DBG_BOARD_REVISION 0x04000012
#define H2DBG_GPIO_REGISTER 0x04000014
#define H2DBG_LED_CONTROL 0x04000016
#define H2DBG_MISC_INPUT 0x04000018
#define H2DBG_LAN_STATUS 0x0400001A
#define H2DBG_LAN_RESET 0x0400001C
#define H2DBG_ETH_REG_BASE 0x04000300
/***************************************************************************
* Ethernet Control Registers
* These are for the LAN91C96 on the debug board
**************************************************************************/
/* Bank 0 in IO space */
#define ETH_TCR (H2DBG_ETH_REG_BASE + 0x00) /* Transmit Control Register */
#define ETH_EPH_STATUS (H2DBG_ETH_REG_BASE + 0x02) /* EPH Status Register */
#define ETH_RCR (H2DBG_ETH_REG_BASE + 0x04) /* Receive Control Register */
#define ETH_COUNTER (H2DBG_ETH_REG_BASE + 0x06) /* Counter Register */
#define ETH_MIR (H2DBG_ETH_REG_BASE + 0x08) /* Memory Information Register */
#define ETH_MCR (H2DBG_ETH_REG_BASE + 0x0A) /* Memory Configuration Register */
/* Bank 1 in IO space */
#define ETH_CONFIG (H2DBG_ETH_REG_BASE + 0x00) /* Configuration Register */
#define ETH_BASE (H2DBG_ETH_REG_BASE + 0x02) /* Base Address Register */
#define ETH_IA0 (H2DBG_ETH_REG_BASE + 0x04) /* Individual Address Register - 0 */
#define ETH_IA1 (H2DBG_ETH_REG_BASE + 0x05) /* Individual Address Register - 1 */
#define ETH_IA2 (H2DBG_ETH_REG_BASE + 0x06) /* Individual Address Register - 2 */
#define ETH_IA3 (H2DBG_ETH_REG_BASE + 0x07) /* Individual Address Register - 3 */
#define ETH_IA4 (H2DBG_ETH_REG_BASE + 0x08) /* Individual Address Register - 4 */
#define ETH_IA5 (H2DBG_ETH_REG_BASE + 0x09) /* Individual Address Register - 5 */
#define ETH_GEN_PURPOSE (H2DBG_ETH_REG_BASE + 0x0A) /* General Address Registers */
#define ETH_CONTROL (H2DBG_ETH_REG_BASE + 0x0B) /* Control Register */
/* Bank 2 in IO space */
#define ETH_MMU (H2DBG_ETH_REG_BASE + 0x00) /* MMU Command Register */
#define ETH_AUTO_TX_START (H2DBG_ETH_REG_BASE + 0x01) /* Auto Tx Start Register */
#define ETH_PNR (H2DBG_ETH_REG_BASE + 0x02) /* Packet Number Register */
#define ETH_ARR (H2DBG_ETH_REG_BASE + 0x03) /* Allocation Result Register */
#define ETH_FIFO (H2DBG_ETH_REG_BASE + 0x04) /* FIFO Ports Register */
#define ETH_POINTER (H2DBG_ETH_REG_BASE + 0x06) /* Pointer Register */
#define ETH_DATA_HIGH (H2DBG_ETH_REG_BASE + 0x08) /* Data High Register */
#define ETH_DATA_LOW (H2DBG_ETH_REG_BASE + 0x0A) /* Data Low Register */
#define ETH_INT_STATS (H2DBG_ETH_REG_BASE + 0x0C) /* Interrupt Status Register - RO */
#define ETH_INT_ACK (H2DBG_ETH_REG_BASE + 0x0C) /* Interrupt Acknowledge Register -WO */
#define ETH_INT_MASK (H2DBG_ETH_REG_BASE + 0x0D) /* Interrupt Mask Register */
#ifndef __ASSEMBLY__
/*
* A couple of utility inlines to aid debugging using the LED's on the
* debug board.
*/
static inline void set_led_state(int state)
{
static unsigned long hw_led_state = 0;
volatile unsigned short *led_address = (volatile unsigned short *)0x04000016;
hw_led_state = ((unsigned long)state);
*((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF);
}
static inline void spin_up_leds(void)
{
volatile int i, j, k;
for (k = 0; k < 2; k++) {
for (i = 0; i < 16; i++) {
for (j = 0; j < 5000; j++) {
set_led_state(1 << i);
}
}
for (i = 15; i >= 0; i--) {
for (j = 0; j < 5000; j++) {
set_led_state(1 << i);
}
}
}
}
#endif /* ! __ASSEMBLY__ */
#endif /* ! __INCLUDED_H2_P2_DBH_BOARD_H */