upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1.4 KiB
1.4 KiB
Driver implementing the fuse API for Freescale's IC Identification Module (IIM)
This IP can be found on the following SoCs:
- MPC512x,
- i.MX25,
- i.MX27,
- i.MX31,
- i.MX35,
- i.MX51,
- i.MX53.
The section numbers in this file refer to the i.MX25 Reference Manual.
A fuse word contains 8 fuse bit slots, as explained in 30.4.2.2.1.
A bank contains 256 fuse word slots, as shown by the memory map in 30.3.1.
Some fuse bit or word slots may not have the corresponding fuses actually
implemented in the fusebox.
See the README files of the SoCs using this driver in order to know the
conventions used by U-Boot to store some specific data in the fuses, e.g. MAC
addresses.
Fuse operations:
Read
Read operations are implemented as read accesses to the shadow registers,
using "Word y of Bank x" from the register summary in 30.3.2. This is
explained in detail in 30.4.5.1.
Sense
Sense operations are implemented as explained in 30.4.5.2.
Program
Program operations are implemented as explained in 30.4.5.3. Following
this operation, the shadow registers are reloaded by the hardware (not
immediately, but this does not make any difference for a user reading
these registers).
Override
Override operations are implemented as write accesses to the shadow
registers, as explained in 30.4.5.4.
Configuration:
CONFIG_FSL_IIM
Define this to enable the fsl_iim driver.