upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/pxa255_idp/idp_notes.txt

46 lines
1.3 KiB

Notes on the Vibren PXA255 IDP.
Chip select usage:
CS0 - flash
CS1 - alt flash (Mdoc or main flash)
CS2 - high speed expansion bus
CS3 - Media Q, low speed exp bus
CS4 - low speed exp bus
CS5 - low speed exp bus
- IDE: offset 0x03000000 (abs: 0x17000000)
- Eth: offset 0x03400000 (abs: 0x17400000)
- core voltage latch: offset 0x03800000 (abs: 0x17800000)
- CPLD: offset 0x03C00000 (abs: 0x17C00000)
PCMCIA Power control
MAX1602EE w/ code pulled high (Cirrus code)
vx = 5v
vy = 3v
Bit pattern
PWR 3,2,1,0
vcc vpp A1VCC A0VCC A1VPP A0VPP
=====================================================
0 0 0 0 0 0 0x0
3 (vy) 0 1 0 1 1 0xB
3 (vy) 3 (vy) 1 0 0 1 0x9
3 (vy) 12(12in) 1 0 1 0 0xA
5 (vx) 0 0 1 1 1 0x7
5 (vx) 5 (vx) 0 1 0 1 0x5
5 (vx 12(12in) 0 1 1 0 0x6
Display power sequencing:
- VDD applied
- within 1sec, activate scanning signals
- wait at least 50mS - scanning signals must be active before activating DISP
Signal mapping:
Schematic LV8V31 signal name
=========================================
LCD_ENAVLCD DISP
LCD_PWR Applies VDD to board
Both of the above signals are controlled by the CPLD