upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
542 lines
11 KiB
542 lines
11 KiB
/*
|
|
* Copyright 2006,2010 Freescale Semiconductor
|
|
* Jeff Brown
|
|
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/io.h>
|
|
|
|
#define pixis_base (u8 *)PIXIS_BASE
|
|
|
|
/*
|
|
* Simple board reset.
|
|
*/
|
|
void pixis_reset(void)
|
|
{
|
|
out_8(pixis_base + PIXIS_RST, 0);
|
|
|
|
while (1);
|
|
}
|
|
|
|
/*
|
|
* Per table 27, page 58 of MPC8641HPCN spec.
|
|
*/
|
|
static int set_px_sysclk(unsigned long sysclk)
|
|
{
|
|
u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
|
|
|
|
switch (sysclk) {
|
|
case 33:
|
|
sysclk_s = 0x04;
|
|
sysclk_r = 0x04;
|
|
sysclk_v = 0x07;
|
|
sysclk_aux = 0x00;
|
|
break;
|
|
case 40:
|
|
sysclk_s = 0x01;
|
|
sysclk_r = 0x1F;
|
|
sysclk_v = 0x20;
|
|
sysclk_aux = 0x01;
|
|
break;
|
|
case 50:
|
|
sysclk_s = 0x01;
|
|
sysclk_r = 0x1F;
|
|
sysclk_v = 0x2A;
|
|
sysclk_aux = 0x02;
|
|
break;
|
|
case 66:
|
|
sysclk_s = 0x01;
|
|
sysclk_r = 0x04;
|
|
sysclk_v = 0x04;
|
|
sysclk_aux = 0x03;
|
|
break;
|
|
case 83:
|
|
sysclk_s = 0x01;
|
|
sysclk_r = 0x1F;
|
|
sysclk_v = 0x4B;
|
|
sysclk_aux = 0x04;
|
|
break;
|
|
case 100:
|
|
sysclk_s = 0x01;
|
|
sysclk_r = 0x1F;
|
|
sysclk_v = 0x5C;
|
|
sysclk_aux = 0x05;
|
|
break;
|
|
case 134:
|
|
sysclk_s = 0x06;
|
|
sysclk_r = 0x1F;
|
|
sysclk_v = 0x3B;
|
|
sysclk_aux = 0x06;
|
|
break;
|
|
case 166:
|
|
sysclk_s = 0x06;
|
|
sysclk_r = 0x1F;
|
|
sysclk_v = 0x4B;
|
|
sysclk_aux = 0x07;
|
|
break;
|
|
default:
|
|
printf("Unsupported SYSCLK frequency.\n");
|
|
return 0;
|
|
}
|
|
|
|
vclkh = (sysclk_s << 5) | sysclk_r;
|
|
vclkl = sysclk_v;
|
|
|
|
out_8(pixis_base + PIXIS_VCLKH, vclkh);
|
|
out_8(pixis_base + PIXIS_VCLKL, vclkl);
|
|
|
|
out_8(pixis_base + PIXIS_AUX, sysclk_aux);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Set the CFG_SYSPLL bits
|
|
*
|
|
* This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
|
|
* read_from_px_regs() is called.
|
|
*/
|
|
static int set_px_mpxpll(unsigned long mpxpll)
|
|
{
|
|
switch (mpxpll) {
|
|
case 2:
|
|
case 4:
|
|
case 6:
|
|
case 8:
|
|
case 10:
|
|
case 12:
|
|
case 14:
|
|
case 16:
|
|
clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
|
|
return 1;
|
|
}
|
|
|
|
printf("Unsupported MPXPLL ratio.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int set_px_corepll(unsigned long corepll)
|
|
{
|
|
u8 val;
|
|
|
|
switch (corepll) {
|
|
case 20:
|
|
val = 0x08;
|
|
break;
|
|
case 25:
|
|
val = 0x0C;
|
|
break;
|
|
case 30:
|
|
val = 0x10;
|
|
break;
|
|
case 35:
|
|
val = 0x1C;
|
|
break;
|
|
case 40:
|
|
val = 0x14;
|
|
break;
|
|
case 45:
|
|
val = 0x0E;
|
|
break;
|
|
default:
|
|
printf("Unsupported COREPLL ratio.\n");
|
|
return 0;
|
|
}
|
|
|
|
clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
|
|
return 1;
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_PIXIS_VCFGEN0_ENABLE
|
|
#define CONFIG_SYS_PIXIS_VCFGEN0_ENABLE 0x1C
|
|
#endif
|
|
|
|
/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
|
|
*
|
|
* The PIXIS can be programmed to look at either the on-board dip switches
|
|
* or various other PIXIS registers to determine the values for COREPLL,
|
|
* MPXPLL, and SYSCLK.
|
|
*
|
|
* CONFIG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
|
|
* register that tells the pixis to use the various PIXIS register.
|
|
*/
|
|
static void read_from_px_regs(int set)
|
|
{
|
|
u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);
|
|
|
|
if (set)
|
|
tmp = tmp | CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
|
|
else
|
|
tmp = tmp & ~CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
|
|
|
|
out_8(pixis_base + PIXIS_VCFGEN0, tmp);
|
|
}
|
|
|
|
/* CONFIG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
|
|
* register that tells the pixis to use the PX_VBOOT[LBMAP] register.
|
|
*/
|
|
#ifndef CONFIG_SYS_PIXIS_VBOOT_ENABLE
|
|
#define CONFIG_SYS_PIXIS_VBOOT_ENABLE 0x04
|
|
#endif
|
|
|
|
/* Configure the source of the boot location
|
|
*
|
|
* The PIXIS can be programmed to look at either the on-board dip switches
|
|
* or the PX_VBOOT[LBMAP] register to determine where we should boot.
|
|
*
|
|
* If we want to boot from the alternate boot bank, we need to tell the PIXIS
|
|
* to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
|
|
*/
|
|
static void read_from_px_regs_altbank(int set)
|
|
{
|
|
u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);
|
|
|
|
if (set)
|
|
tmp = tmp | CONFIG_SYS_PIXIS_VBOOT_ENABLE;
|
|
else
|
|
tmp = tmp & ~CONFIG_SYS_PIXIS_VBOOT_ENABLE;
|
|
|
|
out_8(pixis_base + PIXIS_VCFGEN1, tmp);
|
|
}
|
|
|
|
/* CONFIG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
|
|
* tells the PIXIS what the alternate flash bank is.
|
|
*
|
|
* Note that it's not really a mask. It contains the actual LBMAP bits that
|
|
* must be set to select the alternate bank. This code assumes that the
|
|
* primary bank has these bits set to 0, and the alternate bank has these
|
|
* bits set to 1.
|
|
*/
|
|
#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
|
|
#define CONFIG_SYS_PIXIS_VBOOT_MASK (0x40)
|
|
#endif
|
|
|
|
/* Tell the PIXIS to boot from the default flash bank
|
|
*
|
|
* Program the default flash bank into the VBOOT register. This register is
|
|
* used only if PX_VCFGEN1[FLASH]=1.
|
|
*/
|
|
static void clear_altbank(void)
|
|
{
|
|
clrbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
|
|
}
|
|
|
|
/* Tell the PIXIS to boot from the alternate flash bank
|
|
*
|
|
* Program the alternate flash bank into the VBOOT register. This register is
|
|
* used only if PX_VCFGEN1[FLASH]=1.
|
|
*/
|
|
static void set_altbank(void)
|
|
{
|
|
setbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
|
|
}
|
|
|
|
/* Reset the board with watchdog disabled.
|
|
*
|
|
* This respects the altbank setting.
|
|
*/
|
|
static void set_px_go(void)
|
|
{
|
|
/* Disable the VELA sequencer and watchdog */
|
|
clrbits_8(pixis_base + PIXIS_VCTL, 9);
|
|
|
|
/* Reboot by starting the VELA sequencer */
|
|
setbits_8(pixis_base + PIXIS_VCTL, 0x1);
|
|
|
|
while (1);
|
|
}
|
|
|
|
/* Reset the board with watchdog enabled.
|
|
*
|
|
* This respects the altbank setting.
|
|
*/
|
|
static void set_px_go_with_watchdog(void)
|
|
{
|
|
/* Disable the VELA sequencer */
|
|
clrbits_8(pixis_base + PIXIS_VCTL, 1);
|
|
|
|
/* Enable the watchdog and reboot by starting the VELA sequencer */
|
|
setbits_8(pixis_base + PIXIS_VCTL, 0x9);
|
|
|
|
while (1);
|
|
}
|
|
|
|
/* Disable the watchdog
|
|
*
|
|
*/
|
|
static int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
/* Disable the VELA sequencer and the watchdog */
|
|
clrbits_8(pixis_base + PIXIS_VCTL, 9);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
diswd, 1, 0, pixis_disable_watchdog_cmd,
|
|
"Disable watchdog timer",
|
|
""
|
|
);
|
|
|
|
#ifdef CONFIG_PIXIS_SGMII_CMD
|
|
|
|
/* Enable or disable SGMII mode for a TSEC
|
|
*/
|
|
static int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int which_tsec = -1;
|
|
unsigned char mask;
|
|
unsigned char switch_mask;
|
|
|
|
if ((argc > 2) && (strcmp(argv[1], "all") != 0))
|
|
which_tsec = simple_strtoul(argv[1], NULL, 0);
|
|
|
|
switch (which_tsec) {
|
|
#ifdef CONFIG_TSEC1
|
|
case 1:
|
|
mask = PIXIS_VSPEED2_TSEC1SER;
|
|
switch_mask = PIXIS_VCFGEN1_TSEC1SER;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
case 2:
|
|
mask = PIXIS_VSPEED2_TSEC2SER;
|
|
switch_mask = PIXIS_VCFGEN1_TSEC2SER;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
case 3:
|
|
mask = PIXIS_VSPEED2_TSEC3SER;
|
|
switch_mask = PIXIS_VCFGEN1_TSEC3SER;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_TSEC4
|
|
case 4:
|
|
mask = PIXIS_VSPEED2_TSEC4SER;
|
|
switch_mask = PIXIS_VCFGEN1_TSEC4SER;
|
|
break;
|
|
#endif
|
|
default:
|
|
mask = PIXIS_VSPEED2_MASK;
|
|
switch_mask = PIXIS_VCFGEN1_MASK;
|
|
break;
|
|
}
|
|
|
|
/* Toggle whether the switches or FPGA control the settings */
|
|
if (!strcmp(argv[argc - 1], "switch"))
|
|
clrbits_8(pixis_base + PIXIS_VCFGEN1, switch_mask);
|
|
else
|
|
setbits_8(pixis_base + PIXIS_VCFGEN1, switch_mask);
|
|
|
|
/* If it's not the switches, enable or disable SGMII, as specified */
|
|
if (!strcmp(argv[argc - 1], "on"))
|
|
clrbits_8(pixis_base + PIXIS_VSPEED2, mask);
|
|
else if (!strcmp(argv[argc - 1], "off"))
|
|
setbits_8(pixis_base + PIXIS_VSPEED2, mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
|
|
"pixis_set_sgmii"
|
|
" - Enable or disable SGMII mode for a given TSEC \n",
|
|
"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
|
|
" TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
|
|
" on - enables SGMII\n"
|
|
" off - disables SGMII\n"
|
|
" switch - use switch settings"
|
|
);
|
|
|
|
#endif
|
|
|
|
/*
|
|
* This function takes the non-integral cpu:mpx pll ratio
|
|
* and converts it to an integer that can be used to assign
|
|
* FPGA register values.
|
|
* input: strptr i.e. argv[2]
|
|
*/
|
|
static unsigned long strfractoint(char *strptr)
|
|
{
|
|
int i, j;
|
|
int mulconst;
|
|
int no_dec = 0;
|
|
unsigned long intval = 0, decval = 0;
|
|
char intarr[3], decarr[3];
|
|
|
|
/* Assign the integer part to intarr[]
|
|
* If there is no decimal point i.e.
|
|
* if the ratio is an integral value
|
|
* simply create the intarr.
|
|
*/
|
|
i = 0;
|
|
while (strptr[i] != '.') {
|
|
if (strptr[i] == 0) {
|
|
no_dec = 1;
|
|
break;
|
|
}
|
|
intarr[i] = strptr[i];
|
|
i++;
|
|
}
|
|
|
|
intarr[i] = '\0';
|
|
|
|
if (no_dec) {
|
|
/* Currently needed only for single digit corepll ratios */
|
|
mulconst = 10;
|
|
decval = 0;
|
|
} else {
|
|
j = 0;
|
|
i++; /* Skipping the decimal point */
|
|
while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
|
|
decarr[j] = strptr[i];
|
|
i++;
|
|
j++;
|
|
}
|
|
|
|
decarr[j] = '\0';
|
|
|
|
mulconst = 1;
|
|
for (i = 0; i < j; i++)
|
|
mulconst *= 10;
|
|
decval = simple_strtoul(decarr, NULL, 10);
|
|
}
|
|
|
|
intval = simple_strtoul(intarr, NULL, 10);
|
|
intval = intval * mulconst;
|
|
|
|
return intval + decval;
|
|
}
|
|
|
|
static int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned int i;
|
|
char *p_cf = NULL;
|
|
char *p_cf_sysclk = NULL;
|
|
char *p_cf_corepll = NULL;
|
|
char *p_cf_mpxpll = NULL;
|
|
char *p_altbank = NULL;
|
|
char *p_wd = NULL;
|
|
int unknown_param = 0;
|
|
|
|
/*
|
|
* No args is a simple reset request.
|
|
*/
|
|
if (argc <= 1) {
|
|
pixis_reset();
|
|
/* not reached */
|
|
}
|
|
|
|
for (i = 1; i < argc; i++) {
|
|
if (strcmp(argv[i], "cf") == 0) {
|
|
p_cf = argv[i];
|
|
if (i + 3 >= argc) {
|
|
break;
|
|
}
|
|
p_cf_sysclk = argv[i+1];
|
|
p_cf_corepll = argv[i+2];
|
|
p_cf_mpxpll = argv[i+3];
|
|
i += 3;
|
|
continue;
|
|
}
|
|
|
|
if (strcmp(argv[i], "altbank") == 0) {
|
|
p_altbank = argv[i];
|
|
continue;
|
|
}
|
|
|
|
if (strcmp(argv[i], "wd") == 0) {
|
|
p_wd = argv[i];
|
|
continue;
|
|
}
|
|
|
|
unknown_param = 1;
|
|
}
|
|
|
|
/*
|
|
* Check that cf has all required parms
|
|
*/
|
|
if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
|
|
|| unknown_param) {
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
puts(cmdtp->help);
|
|
putc('\n');
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* PIXIS seems to be sensitive to the ordering of
|
|
* the registers that are touched.
|
|
*/
|
|
read_from_px_regs(0);
|
|
|
|
if (p_altbank)
|
|
read_from_px_regs_altbank(0);
|
|
|
|
clear_altbank();
|
|
|
|
/*
|
|
* Clock configuration specified.
|
|
*/
|
|
if (p_cf) {
|
|
unsigned long sysclk;
|
|
unsigned long corepll;
|
|
unsigned long mpxpll;
|
|
|
|
sysclk = simple_strtoul(p_cf_sysclk, NULL, 10);
|
|
corepll = strfractoint(p_cf_corepll);
|
|
mpxpll = simple_strtoul(p_cf_mpxpll, NULL, 10);
|
|
|
|
if (!(set_px_sysclk(sysclk)
|
|
&& set_px_corepll(corepll)
|
|
&& set_px_mpxpll(mpxpll))) {
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
puts(cmdtp->help);
|
|
putc('\n');
|
|
#endif
|
|
return 1;
|
|
}
|
|
read_from_px_regs(1);
|
|
}
|
|
|
|
/*
|
|
* Altbank specified
|
|
*
|
|
* NOTE CHANGE IN BEHAVIOR: previous code would default
|
|
* to enabling watchdog if altbank is specified.
|
|
* Now the watchdog must be enabled explicitly using 'wd'.
|
|
*/
|
|
if (p_altbank) {
|
|
set_altbank();
|
|
read_from_px_regs_altbank(1);
|
|
}
|
|
|
|
/*
|
|
* Reset with watchdog specified.
|
|
*/
|
|
if (p_wd)
|
|
set_px_go_with_watchdog();
|
|
else
|
|
set_px_go();
|
|
|
|
/*
|
|
* Shouldn't be reached.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
|
|
U_BOOT_CMD(
|
|
pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
|
|
"Reset the board using the FPGA sequencer",
|
|
" pixis_reset\n"
|
|
" pixis_reset [altbank]\n"
|
|
" pixis_reset altbank wd\n"
|
|
" pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
|
|
" pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
|
|
);
|
|
|