upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
155 lines
4.1 KiB
155 lines
4.1 KiB
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
|
|
#ifdef CFG_HSDRAMC
|
|
#include <asm/io.h>
|
|
#include <asm/sdram.h>
|
|
|
|
#include <asm/arch/platform.h>
|
|
|
|
#include "hsdramc1.h"
|
|
|
|
struct hsdramc {
|
|
const struct device *hebi;
|
|
void *regs;
|
|
};
|
|
|
|
static struct hsdramc hsdramc;
|
|
|
|
unsigned long sdram_init(const struct sdram_info *info)
|
|
{
|
|
unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
|
|
unsigned long sdram_size;
|
|
unsigned long tmp;
|
|
unsigned long bus_hz;
|
|
unsigned int i;
|
|
|
|
hsdramc.hebi = get_device(DEVICE_HEBI);
|
|
if (!hsdramc.hebi)
|
|
return 0;
|
|
|
|
/* FIXME: Both of these lines are complete hacks */
|
|
hsdramc.regs = hsdramc.hebi->regs + 0x400;
|
|
bus_hz = pm_get_clock_freq(hsdramc.hebi->resource[0].u.clock.id);
|
|
|
|
cpu_enable_sdram();
|
|
|
|
tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
|
|
| HSDRAMC1_BF(NR, info->row_bits - 11)
|
|
| HSDRAMC1_BF(NB, info->bank_bits - 1)
|
|
| HSDRAMC1_BF(CAS, info->cas)
|
|
| HSDRAMC1_BF(TWR, info->twr)
|
|
| HSDRAMC1_BF(TRC, info->trc)
|
|
| HSDRAMC1_BF(TRP, info->trp)
|
|
| HSDRAMC1_BF(TRCD, info->trcd)
|
|
| HSDRAMC1_BF(TRAS, info->tras)
|
|
| HSDRAMC1_BF(TXSR, info->txsr));
|
|
|
|
#ifdef CFG_SDRAM_16BIT
|
|
tmp |= HSDRAMC1_BIT(DBW);
|
|
sdram_size = 1 << (info->row_bits + info->col_bits
|
|
+ info->bank_bits + 1);
|
|
#else
|
|
sdram_size = 1 << (info->row_bits + info->col_bits
|
|
+ info->bank_bits + 2);
|
|
#endif
|
|
|
|
hsdramc1_writel(&hsdramc, CR, tmp);
|
|
|
|
/*
|
|
* Initialization sequence for SDRAM, from the data sheet:
|
|
*
|
|
* 1. A minimum pause of 200 us is provided to precede any
|
|
* signal toggle.
|
|
*/
|
|
udelay(200);
|
|
|
|
/*
|
|
* 2. A Precharge All command is issued to the SDRAM
|
|
*/
|
|
hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
|
|
hsdramc1_readl(&hsdramc, MR);
|
|
writel(0, sdram);
|
|
|
|
/*
|
|
* 3. Eight auto-refresh (CBR) cycles are provided
|
|
*/
|
|
hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_AUTO_REFRESH);
|
|
hsdramc1_readl(&hsdramc, MR);
|
|
for (i = 0; i < 8; i++)
|
|
writel(0, sdram);
|
|
|
|
/*
|
|
* 4. A mode register set (MRS) cycle is issued to program
|
|
* SDRAM parameters, in particular CAS latency and burst
|
|
* length.
|
|
*
|
|
* CAS from info struct, burst length 1, serial burst type
|
|
*/
|
|
hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_LOAD_MODE);
|
|
hsdramc1_readl(&hsdramc, MR);
|
|
writel(0, sdram + (info->cas << 4));
|
|
|
|
/*
|
|
* 5. A Normal Mode command is provided, 3 clocks after tMRD
|
|
* is met.
|
|
*
|
|
* From the timing diagram, it looks like tMRD is 3
|
|
* cycles...try a dummy read from the peripheral bus.
|
|
*/
|
|
hsdramc1_readl(&hsdramc, MR);
|
|
hsdramc1_writel(&hsdramc, MR, HSDRAMC1_MODE_NORMAL);
|
|
hsdramc1_readl(&hsdramc, MR);
|
|
writel(0, sdram);
|
|
|
|
/*
|
|
* 6. Write refresh rate into SDRAMC refresh timer count
|
|
* register (refresh rate = timing between refresh cycles).
|
|
*
|
|
* 15.6 us is a typical value for a burst of length one
|
|
*/
|
|
hsdramc1_writel(&hsdramc, TR, (156 * (bus_hz / 1000)) / 10000);
|
|
|
|
printf("SDRAM: %u MB at address 0x%08lx\n",
|
|
sdram_size >> 20, info->phys_addr);
|
|
|
|
printf("Testing SDRAM...");
|
|
for (i = 0; i < sdram_size / 4; i++)
|
|
sdram[i] = i;
|
|
|
|
for (i = 0; i < sdram_size / 4; i++) {
|
|
tmp = sdram[i];
|
|
if (tmp != i) {
|
|
printf("FAILED at address 0x%08lx\n",
|
|
info->phys_addr + i * 4);
|
|
printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
puts("OK\n");
|
|
|
|
return sdram_size;
|
|
}
|
|
|
|
#endif /* CFG_HSDRAMC */
|
|
|