upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/npe/include/IxAtmm.h

795 lines
28 KiB

/**
* @file IxAtmm.h
*
* @date 3-DEC-2001
*
* @brief Header file for the IXP400 ATM Manager component (IxAtmm)
*
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
/**
* @defgroup IxAtmm IXP400 ATM Manager (IxAtmm) API
*
* @brief IXP400 ATM Manager component Public API
*
* @{
*/
#ifndef IXATMM_H
#define IXATMM_H
/*
* Put the user defined include files required
*/
#include "IxAtmSch.h"
#include "IxOsalTypes.h"
/*
* #defines and macros used in this file.
*/
/**
* @def IX_ATMM_RET_ALREADY_INITIALIZED
*
* @brief Component has already been initialized
*/
#define IX_ATMM_RET_ALREADY_INITIALIZED 2
/**
* @def IX_ATMM_RET_INVALID_PORT
*
* @brief Specified port does not exist or is out of range */
#define IX_ATMM_RET_INVALID_PORT 3
/**
* @def IX_ATMM_RET_INVALID_VC_DESCRIPTOR
*
* @brief The VC description does not adhere to ATM standards */
#define IX_ATMM_RET_INVALID_VC_DESCRIPTOR 4
/**
* @def IX_ATMM_RET_VC_CONFLICT
*
* @brief The VPI/VCI values supplied are either reserved, or they
* conflict with a previously registered VC on this port */
#define IX_ATMM_RET_VC_CONFLICT 5
/**
* @def IX_ATMM_RET_PORT_CAPACITY_IS_FULL
*
* @brief The virtual connection cannot be established on the port
* because the remaining port capacity is not sufficient to
* support it */
#define IX_ATMM_RET_PORT_CAPACITY_IS_FULL 6
/**
* @def IX_ATMM_RET_NO_SUCH_VC
*
* @brief No registered VC, as described by the supplied VCI/VPI or
* VC identifier values, exists on this port */
#define IX_ATMM_RET_NO_SUCH_VC 7
/**
* @def IX_ATMM_RET_INVALID_VC_ID
*
* @brief The specified VC identifier is out of range. */
#define IX_ATMM_RET_INVALID_VC_ID 8
/**
* @def IX_ATMM_RET_INVALID_PARAM_PTR
*
* @brief A pointer parameter was NULL. */
#define IX_ATMM_RET_INVALID_PARAM_PTR 9
/**
* @def IX_ATMM_UTOPIA_SPHY_ADDR
*
* @brief The phy address when in SPHY mode */
#define IX_ATMM_UTOPIA_SPHY_ADDR 31
/**
* @def IX_ATMM_THREAD_PRI_HIGH
*
* @brief The value of high priority thread */
#define IX_ATMM_THREAD_PRI_HIGH 90
/*
* Typedefs whose scope is limited to this file.
*/
/** @brief Definition for use in the @ref IxAtmmVc structure.
* Indicates the direction of a VC */
typedef enum
{
IX_ATMM_VC_DIRECTION_TX=0, /**< Atmm Vc direction transmit*/
IX_ATMM_VC_DIRECTION_RX, /**< Atmm Vc direction receive*/
IX_ATMM_VC_DIRECTION_INVALID /**< Atmm Vc direction invalid*/
} IxAtmmVcDirection;
/** @brief Definition for use with @ref IxAtmmVcChangeCallback
* callback. Indicates that the event type represented by the
* callback for this VC. */
typedef enum
{
IX_ATMM_VC_CHANGE_EVENT_REGISTER=0, /**< Atmm Vc event register*/
IX_ATMM_VC_CHANGE_EVENT_DEREGISTER, /**< Atmm Vc event de-register*/
IX_ATMM_VC_CHANGE_EVENT_INVALID /**< Atmm Vc event invalid*/
} IxAtmmVcChangeEvent;
/** @brief Definitions for use with @ref ixAtmmUTOPIAInit interface to
* indicate that UTOPIA loopback should be enabled or disabled
* on initialisation. */
typedef enum
{
IX_ATMM_UTOPIA_LOOPBACK_DISABLED=0, /**< Atmm Utopia loopback mode disabled*/
IX_ATMM_UTOPIA_LOOPBACK_ENABLED, /**< Atmm Utopia loopback mode enabled*/
IX_ATMM_UTOPIA_LOOPBACK_INVALID /**< Atmm Utopia loopback mode invalid*/
} IxAtmmUtopiaLoopbackMode;
/** @brief This structure describes the required attributes of a
* virtual connection.
*/
typedef struct {
unsigned vpi; /**< VPI value of this virtual connection */
unsigned vci; /**< VCI value of this virtual connection. */
IxAtmmVcDirection direction; /**< VC direction */
/** Traffic descriptor of this virtual connection. This structure
* is defined by the @ref IxAtmSch component. */
IxAtmTrafficDescriptor trafficDesc;
} IxAtmmVc;
/** @brief Definitions for use with @ref ixAtmmUtopiaInit interface to
* indicate that UTOPIA multi-phy/single-phy mode is used.
*/
typedef enum
{
IX_ATMM_MPHY_MODE = 0, /**< Atmm phy mode mphy*/
IX_ATMM_SPHY_MODE, /**< Atmm phy mode sphy*/
IX_ATMM_PHY_MODE_INVALID /**< Atmm phy mode invalid*/
} IxAtmmPhyMode;
/** @brief Structure contains port-specific information required to
* initialize IxAtmm, and specifically, the IXP400 UTOPIA
* Level-2 device. */
typedef struct {
unsigned reserved_1:11; /**< [31:21] Should be zero */
unsigned UtopiaTxPhyAddr:5; /**< [20:16] Address of the
* transmit (Tx) PHY for this
* port on the 5-bit UTOPIA
* Level-2 address bus */
unsigned reserved_2:11; /**< [15:5] Should be zero */
unsigned UtopiaRxPhyAddr:5; /**< [4:0] Address of the receive
* (Rx) PHY for this port on the
* 5-bit UTOPIA Level-2
* address bus */
} IxAtmmPortCfg;
/** @brief Callback type used with @ref ixAtmmVcChangeCallbackRegister interface
* Defines a callback type which will be used to notify registered
* users of registration/deregistration events on a particular port
*
* @param eventType @ref IxAtmmVcChangeEvent [in] - Event indicating
* whether the VC supplied has been added or
* removed
*
* @param port @ref IxAtmLogicalPort [in] - Specifies the port on which the event has
* occurred
*
* @param vcChanged @ref IxAtmmVc* [in] - Pointer to a structure which gives
* details of the VC which has been added
* or removed on the port
*/
typedef void (*IxAtmmVcChangeCallback) (IxAtmmVcChangeEvent eventType,
IxAtmLogicalPort port,
const IxAtmmVc* vcChanged);
/*
* Variable declarations global to this file only. Externs are followed by
* static variables.
*/
/*
* Extern function prototypes
*/
/*
* Function declarations
*/
/**
* @ingroup IxAtmm
*
* @fn ixAtmmInit (void)
*
* @brief Interface to initialize the IxAtmm software component. Can
* be called once only.
*
* Must be called before any other IxAtmm API is called.
*
* @param "none"
*
* @return @li IX_SUCCESS : IxAtmm has been successfully initialized.
* Calls to other IxAtmm interfaces may now be performed.
* @return @li IX_FAIL : IxAtmm has already been initialized.
*/
PUBLIC IX_STATUS
ixAtmmInit (void);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmUtopiaInit (unsigned numPorts,
IxAtmmPhyMode phyMode,
IxAtmmPortCfg portCfgs[],
IxAtmmUtopiaLoopbackMode loopbackMode)
*
* @brief Interface to initialize the UTOPIA Level-2 ATM coprocessor
* for the specified number of physical ports. The function
* must be called before the ixAtmmPortInitialize interface
* can operate successfully.
*
* @param numPorts unsigned [in] - Indicates the total number of logical
* ports that are active on the device. Up to 12 ports are
* supported.
*
* @param phyMode @ref IxAtmmPhyMode [in] - Put the Utopia coprocessor in SPHY
* or MPHY mode.
*
* @param portCfgs[] @ref IxAtmmPortCfg [in] - Pointer to an array of elements
* detailing the UTOPIA specific port characteristics. The
* length of the array must be equal to the number of ports
* activated. ATM ports are referred to by the relevant
* offset in this array in all subsequent IxAtmm interface
* calls.
*
* @param loopbackMode @ref IxAtmmUtopiaLoopbackMode [in] - Value must be one of
* @ref IX_ATMM_UTOPIA_LOOPBACK_ENABLED or @ref
* IX_ATMM_UTOPIA_LOOPBACK_DISABLED indicating whether
* loopback should be enabled on the device. Loopback can
* only be supported on a single PHY, therefore the numPorts
* parameter must be 1 if loopback is enabled.
*
* @return @li IX_SUCCESS : Indicates that the UTOPIA device has been
* successfully initialized for the supplied ports.
* @return @li IX_ATMM_RET_ALREADY_INITIALIZED : The UTOPIA device has
* already been initialized.
* @return @li IX_FAIL : The supplied parameters are invalid or have been
* rejected by the UTOPIA-NPE device.
*
* @warning
* This interface may only be called once.
* Port identifiers are assumed to range from 0 to (numPorts - 1) in all
* instances.
* In all subsequent calls to interfaces supplied by IxAtmm, the specified
* port value is expected to represent the offset in the portCfgs array
* specified in this interface. i.e. The first port in this array will
* subsequently be represented as port 0, the second port as port 1,
* and so on.*/
PUBLIC IX_STATUS
ixAtmmUtopiaInit (unsigned numPorts,
IxAtmmPhyMode phyMode,
IxAtmmPortCfg portCfgs[],
IxAtmmUtopiaLoopbackMode loopbackMode);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmPortInitialize (IxAtmLogicalPort port,
unsigned txPortRate,
unsigned rxPortRate)
*
* @brief The interface is called following @ref ixAtmmUtopiaInit ()
* and before calls to any other IxAtmm interface. It serves
* to activate the registered ATM port with IxAtmm.
*
* The transmit and receive port rates are specified in bits per
* second. This translates to ATM cells per second according to the
* following formula: CellsPerSecond = portRate / (53*8) The
* IXP400 device supports only 53 byte cells. The client shall make
* sure that the off-chip physical layer device has already been
* initialized.
*
* IxAtmm will configure IxAtmdAcc and IxAtmSch to enable scheduling
* on the port.
*
* This interface must be called once for each active port in the
* system. The first time the interface is invoked, it will configure
* the mechanism by which the handling of transmit, transmit-done and
* receive are driven with the IxAtmdAcc component.
*
* This function is reentrant.
*
* @note The minimum tx rate that will be accepted is 424 bit/s which equates
* to 1 cell (53 bytes) per second.
*
* @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be
* initialized.
*
* @param txPortRate unsigned [in] - Value specifies the
* transmit port rate for this port in
* bits/second. This value is used by the ATM Scheduler
* component is evaluating VC access requests for the port.
*
* @param rxPortRate unsigned [in] - Value specifies the
* receive port rate for this port in bits/second.
*
* @return @li IX_SUCCESS : The specificed ATM port has been successfully
* initialized. IxAtmm is ready to accept VC registrations on
* this port.
*
* @return @li IX_ATMM_RET_ALREADY_INITIALIZED : ixAtmmPortInitialize has
* already been called successfully on this port. The current
* call is rejected.
*
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid. The request is rejected.
*
* @return @li IX_FAIL : IxAtmm could not initialize the port because the
* inputs are not understood.
*
* @sa ixAtmmPortEnable, ixAtmmPortDisable
*
*/
PUBLIC IX_STATUS
ixAtmmPortInitialize (IxAtmLogicalPort port,
unsigned txPortRate,
unsigned rxPortRate);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmPortModify (IxAtmLogicalPort port,
unsigned txPortRate,
unsigned rxPortRate)
*
* @brief A client may call this interface to change the existing
* port rate (expressed in bits/second) on an established ATM
* port.
*
* @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be
* initialized.
*
* @param txPortRate unsigned [in] - Value specifies the``
* transmit port rate for this port in
* bits/second. This value is used by the ATM Scheduler
* component is evaluating VC access requests for the port.
*
* @param rxPortRate unsigned [in] - Value specifies the
* receive port rate for this port in
* bits/second.
*
* @return @li IX_SUCCESS : The indicated ATM port rates have been
* successfully modified.
*
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid. The request is rejected.
*
* @return @li IX_FAIL : IxAtmm could not update the port because the
* inputs are not understood, or the interface was called before
* the port was initialized. */
PUBLIC IX_STATUS
ixAtmmPortModify (IxAtmLogicalPort port,
unsigned txPortRate,
unsigned rxPortRate);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmPortQuery (IxAtmLogicalPort port,
unsigned *txPortRate,
unsigned *rxPortRate);
*
* @brief The client may call this interface to request details on
* currently registered transmit and receive rates for an ATM
* port.
*
* @param port @ref IxAtmLogicalPort [in] - Value identifies the port from which the
* rate details are requested.
*
* @param *txPortRate unsigned [out] - Pointer to a value
* which will be filled with the value of the transmit port
* rate specified in bits/second.
*
* @param *rxPortRate unsigned [out] - Pointer to a value
* which will be filled with the value of the receive port
* rate specified in bits/second.
*
* @return @li IX_SUCCESS : The information requested on the specified
* port has been successfully supplied in the output.
*
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid. The request is rejected.
*
* @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
* NULL.
*
* @return @li IX_FAIL : IxAtmm could not update the port because the
* inputs are not understood, or the interface was called before
* the port was initialized. */
PUBLIC IX_STATUS
ixAtmmPortQuery (IxAtmLogicalPort port,
unsigned *txPortRate,
unsigned *rxPortRate);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmPortEnable(IxAtmLogicalPort port)
*
* @brief The client call this interface to enable transmit for an ATM
* port. At initialisation, all the ports are disabled.
*
* @param port @ref IxAtmLogicalPort [in] - Value identifies the port
*
* @return @li IX_SUCCESS : Transmission over this port is started.
*
* @return @li IX_FAIL : The port parameter is not valid, or the
* port is already enabled
*
* @note - When a port is disabled, Rx and Tx VC Connect requests will fail
*
* @note - This function uses system resources and should not be used
* inside an interrupt context.
*
* @sa ixAtmmPortDisable */
PUBLIC IX_STATUS
ixAtmmPortEnable(IxAtmLogicalPort port);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmPortDisable(IxAtmLogicalPort port)
*
* @brief The client call this interface to disable transmit for an ATM
* port. At initialisation, all the ports are disabled.
*
* @param port @ref IxAtmLogicalPort [in] - Value identifies the port
*
* @return @li IX_SUCCESS : Transmission over this port is stopped.
*
* @return @li IX_FAIL : The port parameter is not valid, or the
* port is already disabled
*
* @note - When a port is disabled, Rx and Tx VC Connect requests will fail
*
* @note - This function call does not stop RX traffic. It is supposed
* that this function is invoked when a serious problem
* is detected (e.g. physical layer broken). Then, the RX traffic
* is not passing.
*
* @note - This function is blocking until the hw acknowledge that the
* transmission is stopped.
*
* @note - This function uses system resources and should not be used
* inside an interrupt context.
*
* @sa ixAtmmPortEnable */
PUBLIC IX_STATUS
ixAtmmPortDisable(IxAtmLogicalPort port);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmVcRegister (IxAtmLogicalPort port,
IxAtmmVc *vcToAdd,
IxAtmSchedulerVcId *vcId)
*
* @brief This interface is used to register an ATM Virtual
* Connection on the specified ATM port.
*
* Each call to this interface registers a unidirectional virtual
* connection with the parameters specified. If a bi-directional VC
* is needed, the function should be called twice (once for each
* direction, Tx & Rx) where the VPI and VCI and port parameters in
* each call are identical.
*
* With the addition of each new VC to a port, a series of
* callback functions are invoked by the IxAtmm component to notify
* possible external components of the change. The callback functions
* are registered using the @ref ixAtmmVcChangeCallbackRegister interface.
*
* The IxAtmSch component is notified of the registration of transmit
* VCs.
*
* @param port @ref IxAtmLogicalPort [in] - Identifies port on which the specified VC is
* to be registered.
*
* @param *vcToAdd @ref IxAtmmVc [in] - Pointer to an @ref IxAtmmVc structure
* containing a description of the VC to be registered. The
* client shall fill the vpi, vci and direction and relevant
* trafficDesc members of this structure before calling this
* function.
*
* @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which is filled
* with the per-port unique identifier value for this VC.
* This identifier will be required when a request is
* made to deregister or change this VC. VC identifiers
* for transmit VCs will have a value between 0-43,
* i.e. 32 data Tx VCs + 12 OAM Tx Port VCs.
* Receive VCs will have a value between 44-66,
* i.e. 32 data Rx VCs + 1 OAM Rx VC.
*
* @return @li IX_SUCCESS : The VC has been successfully registered on
* this port. The VC is ready for a client to configure IxAtmdAcc
* for receive and transmit operations on the VC.
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid or has not been initialized. The request
* is rejected.
* @return @li IX_ATMM_RET_INVALID_VC_DESCRIPTOR : The descriptor
* pointed to by vcToAdd is invalid. The registration request
* is rejected.
* @return @li IX_ATMM_RET_VC_CONFLICT : The VC requested conflicts with
* reserved VPI and/or VCI values or with another VC already activated
* on this port.
* @return @li IX_ATMM_RET_PORT_CAPACITY_IS_FULL : The VC cannot be
* registered in the port becuase the port capacity is
* insufficient to support the requested ATM traffic contract.
* The registration request is rejected.
* @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
* NULL.
*
* @warning IxAtmm has no capability of signaling or negotiating a virtual
* connection. Negotiation of the admission of the VC to the network
* is beyond the scope of this function. This is assumed to be
* performed by the calling client, if appropriate,
* before or after this function is called.
*/
PUBLIC IX_STATUS
ixAtmmVcRegister (IxAtmLogicalPort port,
IxAtmmVc *vcToAdd,
IxAtmSchedulerVcId *vcId);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId)
*
* @brief Function called by a client to deregister a VC from the
* system.
*
* With the removal of each new VC from a port, a series of
* registered callback functions are invoked by the IxAtmm component
* to notify possible external components of the change. The callback
* functions are registered using the @ref ixAtmmVcChangeCallbackRegister.
*
* The IxAtmSch component is notified of the removal of transmit VCs.
*
* @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
* removed is currently registered.
*
* @param vcId @ref IxAtmSchedulerVcId [in] - VC identifier value of the VC to
* be deregistered. This value was supplied to the client when
the VC was originally registered. This value can also be
queried from the IxAtmm component through the @ref ixAtmmVcQuery
* interface.
*
* @return @li IX_SUCCESS : The specified VC has been successfully
* removed from this port.
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid or has not been initialized. The request
* is rejected.
* @return @li IX_FAIL : There is no registered VC associated with the
* supplied identifier registered on this port. */
PUBLIC IX_STATUS
ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmVcQuery (IxAtmLogicalPort port,
unsigned vpi,
unsigned vci,
IxAtmmVcDirection direction,
IxAtmSchedulerVcId *vcId,
IxAtmmVc *vcDesc)
*
* @brief This interface supplies information about an active VC on a
* particular port when supplied with the VPI, VCI and
* direction of that VC.
*
* @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
* queried is currently registered.
*
* @param vpi unsigned [in] - ATM VPI value of the requested VC.
*
* @param vci unsigned [in] - ATM VCI value of the requested VC.
*
* @param direction @ref IxAtmmVcDirection [in] - One of @ref
* IX_ATMM_VC_DIRECTION_TX or @ref IX_ATMM_VC_DIRECTION_RX
* indicating the direction (Tx or Rx) of the requested VC.
*
* @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which will be
* filled with the VC identifier value for the requested
* VC (as returned by @ref ixAtmmVcRegister), if it
* exists on this port.
*
* @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure
* which will be filled with the specific details of the
* requested VC, if it exists on this port.
*
* @return @li IX_SUCCESS : The specified VC has been found on this port
* and the requested details have been returned.
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid or has not been initialized. The request
* is rejected.
* @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified
* port which matches the search criteria (VPI, VCI, direction)
* given. No data is returned.
* @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
* NULL.
*
*/
PUBLIC IX_STATUS
ixAtmmVcQuery (IxAtmLogicalPort port,
unsigned vpi,
unsigned vci,
IxAtmmVcDirection direction,
IxAtmSchedulerVcId *vcId,
IxAtmmVc *vcDesc);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc)
*
* @brief This interface supplies information about an active VC on a
* particular port when supplied with a vcId for that VC.
*
* @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
* queried is currently registered.
*
* @param vcId @ref IxAtmSchedulerVcId [in] - Value returned by @ref ixAtmmVcRegister which
* uniquely identifies the requested VC on this port.
*
* @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure
* which will be filled with the specific details of the
* requested VC, if it exists on this port.
*
* @return @li IX_SUCCESS : The specified VC has been found on this port
* and the requested details have been returned.
* @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
* input is not valid or has not been initialized. The request
* is rejected.
* @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified
* port which matches the supplied identifier. No data is
* returned.
* @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
* NULL.
*/
PUBLIC IX_STATUS
ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback)
*
* @brief This interface is invoked to supply a function to IxAtmm
* which will be called to notify the client if a new VC is
* registered with IxAtmm or an existing VC is removed.
*
* The callback, when invoked, will run within the context of the call
* to @ref ixAtmmVcRegister or @ref ixAtmmVcDeregister which caused
* the change of state.
*
* A maximum of 32 calbacks may be registered in with IxAtmm.
*
* @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies
* with the @ref IxAtmmVcChangeCallback definition. This
* function will be invoked by IxAtmm with the appropiate
* parameters for the relevant VC when any VC has been
* registered or deregistered with IxAtmm.
*
* @return @li IX_SUCCESS : The specified callback has been registered
* successfully with IxAtmm and will be invoked when appropriate.
* @return @li IX_FAIL : Either the supplied callback is invalid, or
* IxAtmm has already registered 32 and connot accommodate
* any further registrations of this type. The request is
* rejected.
*
* @warning The client must not call either the @ref
* ixAtmmVcRegister or @ref ixAtmmVcDeregister interfaces
* from within the supplied callback function. */
PUBLIC IX_STATUS ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback)
*
* @brief This interface is invoked to deregister a previously supplied
* callback function.
*
* @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies
* with the @ref IxAtmmVcChangeCallback definition. This
* function will removed from the table of callbacks.
*
* @return @li IX_SUCCESS : The specified callback has been deregistered
* successfully from IxAtmm.
* @return @li IX_FAIL : Either the supplied callback is invalid, or
* is not currently registered with IxAtmm.
*/
PUBLIC IX_STATUS
ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmUtopiaStatusShow (void)
*
* @brief Display utopia status counters
*
* @param "none"
*
* @return @li IX_SUCCESS : Show function was successful
* @return @li IX_FAIL : Internal failure
*/
PUBLIC IX_STATUS
ixAtmmUtopiaStatusShow (void);
/**
* @ingroup IxAtmm
*
* @fn ixAtmmUtopiaCfgShow (void)
*
* @brief Display utopia information(config registers and status registers)
*
* @param "none"
*
* @return @li IX_SUCCESS : Show function was successful
* @return @li IX_FAIL : Internal failure
*/
PUBLIC IX_STATUS
ixAtmmUtopiaCfgShow (void);
#endif
/* IXATMM_H */
/** @} */