upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/npe/include/IxI2cDrv.h

867 lines
28 KiB

/**
* @file IxI2cDrv.h
*
* @brief Header file for the IXP400 I2C Driver (IxI2cDrv)
*
* @version $Revision: 0.1 $
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
/**
* @defgroup IxI2cDrv IXP400 I2C Driver(IxI2cDrv) API
*
* @brief IXP400 I2C Driver Public API
*
* @{
*/
#ifndef IXI2CDRV_H
#define IXI2CDRV_H
#ifdef __ixp46X
#include "IxOsal.h"
/*
* Section for #define
*/
/**
* @ingroup IxI2cDrv
* @brief The interval of micro/mili seconds the IXP will wait before it polls for
* status from the ixI2cIntrXferStatus; Every 20us is 1 byte @
* 400Kbps and 4 bytes @ 100Kbps. This is dependent on delay type selected
* through the API ixI2cDrvDelayTypeSelect.
*/
#define IX_I2C_US_POLL_FOR_XFER_STATUS 20
/**
* @ingroup IxI2cDrv
* @brief The number of tries that will be attempted to call a callback
* function if the callback does not or is unable to resolve the
* issue it is called to resolve
*/
#define IX_I2C_NUM_OF_TRIES_TO_CALL_CALLBACK_FUNC 10
/**
* @ingroup IxI2cDrv
* @brief Number of tries slave will poll the IDBR Rx full bit before it
* gives up
*/
#define IX_I2C_NUM_TO_POLL_IDBR_RX_FULL 0x100
/**
* @ingroup IxI2cDrv
* @brief Number of tries slave will poll the IDBR Tx empty bit before it
* gives up
*/
#define IX_I2C_NUM_TO_POLL_IDBR_TX_EMPTY 0x100
/*
* Section for enum
*/
/**
* @ingroup IxI2cDrv
*
* @enum IxI2cMasterStatus
*
* @brief The master status - transfer complete, bus error or arbitration loss
*/
typedef enum
{
IX_I2C_MASTER_XFER_COMPLETE = IX_SUCCESS,
IX_I2C_MASTER_XFER_BUS_ERROR,
IX_I2C_MASTER_XFER_ARB_LOSS
} IxI2cMasterStatus;
/**
* @ingroup IxI2cDrv
*
* @enum IX_I2C_STATUS
*
* @brief The status that can be returned in a I2C driver initialization
*/
typedef enum
{
IX_I2C_SUCCESS = IX_SUCCESS, /**< Success status */
IX_I2C_FAIL, /**< Fail status */
IX_I2C_NOT_SUPPORTED, /**< hardware does not have dedicated I2C hardware */
IX_I2C_NULL_POINTER, /**< parameter passed in is NULL */
IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE, /**< speed mode selected is invalid */
IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE, /**< flow mode selected is invalid */
IX_I2C_SLAVE_ADDR_CB_MISSING, /**< slave callback is NULL */
IX_I2C_GEN_CALL_CB_MISSING, /**< general callback is NULL */
IX_I2C_INVALID_SLAVE_ADDR, /**< invalid slave address specified */
IX_I2C_INT_BIND_FAIL, /**< interrupt bind fail */
IX_I2C_INT_UNBIND_FAIL, /**< interrupt unbind fail */
IX_I2C_NOT_INIT, /**< I2C is not initialized yet */
IX_I2C_MASTER_BUS_BUSY, /**< master detected a I2C bus busy */
IX_I2C_MASTER_ARB_LOSS, /**< master experienced arbitration loss */
IX_I2C_MASTER_XFER_ERROR, /**< master experienced a transfer error */
IX_I2C_MASTER_BUS_ERROR, /**< master detected a I2C bus error */
IX_I2C_MASTER_NO_BUFFER, /**< no buffer provided for master transfer */
IX_I2C_MASTER_INVALID_XFER_MODE, /**< xfer mode selected is invalid */
IX_I2C_SLAVE_ADDR_NOT_DETECTED, /**< polled slave addr not detected */
IX_I2C_GEN_CALL_ADDR_DETECTED, /**< polling detected general call */
IX_I2C_SLAVE_READ_DETECTED, /**< polling detected slave read request */
IX_I2C_SLAVE_WRITE_DETECTED, /**< polling detected slave write request */
IX_I2C_SLAVE_NO_BUFFER, /**< no buffer provided for slave transfers */
IX_I2C_DATA_SIZE_ZERO, /**< data size transfer is zero - invalid */
IX_I2C_SLAVE_WRITE_BUFFER_EMPTY, /**< slave buffer is used till empty */
IX_I2C_SLAVE_WRITE_ERROR, /**< slave write experienced an error */
IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL, /**< slave buffer is filled up */
IX_I2C_SLAVE_OR_GEN_READ_ERROR /**< slave read experienced an error */
} IX_I2C_STATUS;
/**
* @ingroup IxI2cDrv
*
* @enum IxI2cSpeedMode
*
* @brief Type of speed modes supported by the I2C hardware.
*/
typedef enum
{
IX_I2C_NORMAL_MODE = 0x0,
IX_I2C_FAST_MODE
} IxI2cSpeedMode;
/**
* @ingroup IxI2cDrv
*
* @enum IxI2cXferMode
*
* @brief Used for indicating it is a repeated start or normal transfer
*/
typedef enum
{
IX_I2C_NORMAL = 0x0,
IX_I2C_REPEATED_START
} IxI2cXferMode;
/**
* @ingroup IxI2cDrv
*
* @enum IxI2cFlowMode
*
* @brief Used for indicating it is a poll or interrupt mode
*/
typedef enum
{
IX_I2C_POLL_MODE = 0x0,
IX_I2C_INTERRUPT_MODE
} IxI2cFlowMode;
/**
* @ingroup IxI2cDrv
*
* @enum IxI2cDelayMode
*
* @brief Used for selecting looping delay or OS scheduler delay
*/
typedef enum
{
IX_I2C_LOOP_DELAY = 1, /**< delay in microseconds */
IX_I2C_SCHED_DELAY /**< delay in miliseconds */
} IxI2cDelayMode;
/**
* @ingroup IxI2cDrv
*
* @brief The pointer to the function that will be called when the master
* has completed its receive. The parameter that is passed will
* provide the status of the read (success, arb loss, or bus
* error), the transfer mode (normal or repeated start, the
* buffer pointer and number of bytes transferred.
*/
typedef void (*IxI2cMasterReadCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32);
/**
* @ingroup IxI2cDrv
*
* @brief The pointer to the function that will be called when the master
* has completed its transmit. The parameter that is passed will
* provide the status of the write (success, arb loss, or buss
* error), the transfer mode (normal or repeated start), the
* buffer pointer and number of bytes transferred.
*/
typedef void (*IxI2cMasterWriteCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32);
/**
* @ingroup IxI2cDrv
*
* @brief The pointer to the function that will be called when a slave
* address detected in interrupt mode for a read. The parameters
* that is passed will provide the read status, buffer pointer,
* buffer size, and the bytes received. When a start of a read
* is initiated there will be no buffer allocated and this callback
* will be called to request for a buffer. While receiving, if the
* buffer gets filled, this callback will be called to request for
* a new buffer while sending the filled buffer's pointer and size,
* and data size received. When the receive is complete, this
* callback will be called to process the data and free the memory
* by passing the buffer's pointer and size, and data size received.
*/
typedef void (*IxI2cSlaveReadCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
/**
* @ingroup IxI2cDrv
*
* @brief The pointer to the function that will be called when a slave
* address detected in interrupt mode for a write. The parameters
* that is passed will provide the write status, buffer pointer,
* buffer size, and the bytes received. When a start of a write is
* initiated there will be no buffer allocated and this callback
* will be called to request for a buffer and to fill it with data.
* While transmitting, if the data in the buffer empties, this
* callback will be called to request for more data to be filled in
* the same or new buffer. When the transmit is complete, this
* callback will be called to free the memory or other actions to
* be taken.
*/
typedef void (*IxI2cSlaveWriteCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
/**
* @ingroup IxI2cDrv
*
* @brief The pointer to the function that will be called when a general
* call detected in interrupt mode for a read. The parameters that
* is passed will provide the read status, buffer pointer, buffer
* size, and the bytes received. When a start of a read is
* initiated there will be no buffer allocated and this callback
* will be called to request for a buffer. While receiving, if the
* buffer gets filled, this callback will be called to request for
* a new buffer while sending the filled buffer's pointer and size,
* and data size received. When the receive is complete, this
* callback will be called to process the data and free the memory
* by passing the buffer's pointer and size, and data size received.
*/
typedef void (*IxI2cGenCallCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
/*
* Section for struct
*/
/**
* @brief contains all the variables required to initialize the I2C unit
*
* Structure to be filled and used for calling initialization
*/
typedef struct
{
IxI2cSpeedMode I2cSpeedSelect; /**<Select either normal (100kbps)
or fast mode (400kbps)*/
IxI2cFlowMode I2cFlowSelect; /**<Select interrupt or poll mode*/
IxI2cMasterReadCallbackP MasterReadCBP;
/**<The master read callback pointer */
IxI2cMasterWriteCallbackP MasterWriteCBP;
/**<The master write callback pointer */
IxI2cSlaveReadCallbackP SlaveReadCBP;
/**<The slave read callback pointer */
IxI2cSlaveWriteCallbackP SlaveWriteCBP;
/**<The slave write callback pointer */
IxI2cGenCallCallbackP GenCallCBP;
/**<The general call callback pointer */
BOOL I2cGenCallResponseEnable; /**<Enable/disable the unit to
respond to generall calls.*/
BOOL I2cSlaveAddrResponseEnable;/**<Enable/disable the unit to
respond to the slave address set in
ISAR*/
BOOL SCLEnable; /**<Enable/disable the unit from
driving the SCL line during master
mode operation*/
UINT8 I2cHWAddr; /**<The address the unit will
response to as a slave device*/
} IxI2cInitVars;
/**
* @brief contains results of counters and their overflow
*
* Structure contains all values of counters and associated overflows.
*/
typedef struct
{
UINT32 ixI2cMasterXmitCounter; /**<Total bytes transmitted as
master.*/
UINT32 ixI2cMasterFailedXmitCounter; /**<Total bytes failed for
transmission as master.*/
UINT32 ixI2cMasterRcvCounter; /**<Total bytes received as
master.*/
UINT32 ixI2cMasterFailedRcvCounter; /**<Total bytes failed for
receival as master.*/
UINT32 ixI2cSlaveXmitCounter; /**<Total bytes transmitted as
slave.*/
UINT32 ixI2cSlaveFailedXmitCounter; /**<Total bytes failed for
transmission as slave.*/
UINT32 ixI2cSlaveRcvCounter; /**<Total bytes received as
slave.*/
UINT32 ixI2cSlaveFailedRcvCounter; /**<Total bytes failed for
receival as slave.*/
UINT32 ixI2cGenAddrCallSucceedCounter; /**<Total bytes successfully
transmitted for general address.*/
UINT32 ixI2cGenAddrCallFailedCounter; /**<Total bytes failed transmission
for general address.*/
UINT32 ixI2cArbLossCounter; /**<Total instances of arbitration
loss has occured.*/
} IxI2cStatsCounters;
/*
* Section for prototypes interface functions
*/
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvInit(
IxI2cInitVars *InitVarsSelected)
*
* @brief Initializes the I2C Driver.
*
* @param "IxI2cInitVars [in] *InitVarsSelected" - struct containing required
* variables for initialization
*
* Global Data :
* - None.
*
* This API will check if the hardware supports this I2C driver and the validity
* of the parameters passed in. It will continue to process the parameters
* passed in by setting the speed of the I2C unit (100kbps or 400kbps), setting
* the flow to either interrupt or poll mode, setting the address of the I2C unit,
* enabling/disabling the respond to General Calls, enabling/disabling the respond
* to Slave Address and SCL line driving. If it is interrupt mode, then it will
* register the callback routines for master, slavetransfer and general call receive.
*
* @return
* - IX_I2C_SUCCESS - Successfully initialize and enable the I2C
* hardware.
* - IX_I2C_NOT_SUPPORTED - The hardware does not support or have a
* dedicated I2C unit to support this driver
* - IX_I2C_NULL_POINTER - The parameter passed in is a NULL pointed
* - IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE - The speed mode selected in the
* InitVarsSelected is invalid
* - IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE - The flow mode selected in the
* InitVarsSelected is invalid
* - IX_I2C_INVALID_SLAVE_ADDR - The address 0x0 is reserved for
* general call.
* - IX_I2C_SLAVE_ADDR_CB_MISSING - interrupt mode is selected but
* slave address callback pointer is NULL
* - IX_I2C_GEN_CALL_CB_MISSING - interrupt mode is selected but
* general call callback pointer is NULL
* - IX_I2C_INT_BIND_FAIL - The ISR for the I2C failed to bind
* - IX_I2C_INT_UNBIND_FAIL - The ISR for the I2C failed to unbind
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvInit(IxI2cInitVars *InitVarsSelected);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvUninit(
void)
*
* @brief Disables the I2C hardware
*
* @param - None
*
* Global Data :
* - None.
*
* This API will disable the I2C hardware, unbind interrupt, and unmap memory.
*
* @return
* - IX_I2C_SUCCESS - successfully un-initialized I2C
* - IX_I2C_INT_UNBIND_FAIL - failed to unbind the I2C interrupt
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvUninit(void);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvSlaveAddrSet(
UINT8 SlaveAddrSet)
*
* @brief Sets the I2C Slave Address
*
* @param "UINT8 [in] SlaveAddrSet" - Slave Address to be inserted into ISAR
*
* Global Data :
* - None.
*
* This API will insert the SlaveAddrSet into the ISAR.
*
* @return
* - IX_I2C_SUCCESS - successfuly set the slave addr
* - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvSlaveAddrSet(UINT8 SlaveAddrSet);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvBusScan(
void)
*
* @brief scans the I2C bus for slave devices
*
* @param - None
*
* Global Data :
* - None.
*
* This API will prompt all slave addresses for a reply except its own
*
* @return
* - IX_I2C_SUCCESS - found at least one slave device
* - IX_I2C_FAIL - Fail to find even one slave device
* - IX_I2C_BUS_BUSY - The I2C bus is busy (held by another I2C master)
* - IX_I2C_ARB_LOSS - The I2C bus was loss to another I2C master
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : yes
* @li ISR Callable : yes
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvBusScan(void);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvWriteTransfer(
UINT8 SlaveAddr,
char *bufP,
UINT32 dataSize,
IxI2cXferMode XferModeSelect)
*
* @param "UINT8 [in] SlaveAddr" - The slave address to request data from.
* @param "char [in] *bufP" - The pointer to the data to be transmitted.
* @param "UINT32 [in] dataSize" - The number of bytes requested.
* @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected,
* either repeated start (ends w/o stop) or normal (start and stop)
*
* Global Data :
* - None.
*
* This API will try to obtain master control of the I2C bus and transmit the
* number of bytes, specified by dataSize, to the user specified slave
* address from the buffer pointer. It will use either interrupt or poll mode
* depending on the method selected.
*
* If in interrupt mode and IxI2cMasterWriteCallbackP is not NULL, the driver
* will initiate the transfer and return immediately. The function pointed to
* by IxI2cMasterWriteCallbackP will be called in the interrupt service
* handlers when the operation is complete.
*
* If in interrupt mode and IxI2cMasterWriteCallbackP is NULL, then the driver
* will wait for the operation to complete, and then return.
*
* And if the repeated start transfer mode is selected, then it will not send a
* stop signal at the end of all the transfers.
* *NOTE*: If repeated start transfer mode is selected, it has to end with a
* normal mode transfer mode else the bus will continue to be held
* by the IXP.
*
* @return
* - IX_I2C_SUCCESS - Successfuuly wrote data to slave.
* - IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master)
* - IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master
* - IX_I2C_MASTER_XFER_ERROR - There was a transfer error
* - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer
* - IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL
* - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid
* - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : no
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvWriteTransfer(
UINT8 SlaveAddr,
char *bufP,
UINT32 dataSize,
IxI2cXferMode XferModeSelect);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvReadTransfer(
UINT8 SlaveAddr,
char *bufP,
UINT32 dataSize,
IxI2cXferMode XferModeSelect)
*
* @brief Initiates a transfer to receive bytes of data from a slave
* device through the I2C bus.
*
* @param "UINT8 [in] SlaveAddr" - The slave address to request data from.
* @param "char [out] *bufP" - The pointer to the buffer to store the
* requested data.
* @param "UINT32 [in] dataSize" - The number of bytes requested.
* @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected,
* either repeated start (ends w/o stop) or normal (start and stop)
*
* Global Data :
* - None.
*
* This API will try to obtain master control of the I2C bus and receive the
* number of bytes, specified by dataSize, from the user specified address
* into the receive buffer. It will use either interrupt or poll mode depending
* on the mode selected.
*
* If in interrupt mode and IxI2cMasterReadCallbackP is not NULL, the driver
* will initiate the transfer and return immediately. The function pointed to
* by IxI2cMasterReadCallbackP will be called in the interrupt service
* handlers when the operation is complete.
*
* If in interrupt mode and IxI2cMasterReadCallbackP is NULL, then the driver will
* wait for the operation to complete, and then return.
*
* And if the repeated start transfer mode is selected, then it will not send a
* stop signal at the end of all the transfers.
* *NOTE*: If repeated start transfer mode is selected, it has to end with a
* normal mode transfer mode else the bus will continue to be held
* by the IXP.
*
* @return
* - IX_I2C_SUCCESS - Successfuuly read slave data
* - IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master)
* - IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master
* - IX_I2C_MASTER_XFER_ERROR - There was a bus error during transfer
* - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer
* - IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL
* - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid
* - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified
* - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : no
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvReadTransfer(
UINT8 SlaveAddr,
char *bufP,
UINT32 dataSize,
IxI2cXferMode XferModeSelect);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvSlaveAddrAndGenCallDetectedCheck(
void)
*
* @brief Checks the I2C Status Register to determine if a slave address is
* detected
*
* @param - None
*
* Global Data :
* - None.
*
* This API is used in polled mode to determine if the I2C unit is requested
* for a slave or general call transfer. If it is requested for a slave
* transfer then it will determine if it is a general call (read only), read,
* or write transfer requested.
*
* @return
* - IX_I2C_SLAVE_ADDR_NOT_DETECTED - The I2C unit is not requested for slave
* transfer
* - IX_I2C_GEN_CALL_ADDR_DETECTED - The I2C unit is not requested for slave
* transfer but for general call
* - IX_I2C_SLAVE_READ_DETECTED - The I2C unit is requested for a read
* - IX_I2C_SLAVE_WRITE_DETECTED - The I2C unit is requested for a write
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : no
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvSlaveAddrAndGenCallDetectedCheck(void);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvSlaveOrGenDataReceive(
char *bufP,
UINT32 bufSize,
UINT32 *dataSizeRcvd)
*
* @brief Performs the slave receive or general call receive data transfer
*
* @param "char [in] *bufP" - the pointer to the buffer to store data
* "UINT32 [in] bufSize" - the buffer size allocated
* "UINT32 [in] *dataSizeRcvd" - the length of data received in bytes
*
* Global Data :
* - None.
*
* This API is only used in polled mode to perform the slave read or general call
* receive data. It will continuously store the data received into bufP until
* complete or until bufP is full in which it will return
* IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL. If in interrupt mode, the callback will be
* used.
*
* @return
* - IX_I2C_SUCCESS - The I2C driver transferred the data successfully.
* - IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL - The I2C driver has ran out of
* space to store the received data.
* - IX_I2C_SLAVE_OR_GEN_READ_ERROR - The I2C driver didn't manage to
* detect the IDBR Rx Full bit
* - IX_I2C_DATA_SIZE_ZERO - bufSize passed in is zero, which is invalid
* - IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL
* - IX_I2C_NULL_POINTER - dataSizeRcvd is NULL
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : no
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvSlaveOrGenDataReceive(
char *bufP,
UINT32 bufSize,
UINT32 *dataSizeRcvd);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvSlaveDataTransmit(
char *bufP,
UINT32 dataSize,
UINT32 *dataSizeXmtd)
*
* @brief Performs the slave write data transfer
*
* @param "char [in] *bufP" - the pointer to the buffer for data to be
* transmitted
* "UINT32 [in] bufSize" - the buffer size allocated
* "UINT32 [in] *dataSizeRcvd" - the length of data trasnmitted in
* bytes
*
* Global Data :
* - None.
*
* This API is only used in polled mode to perform the slave transmit data. It
* will continuously transmit the data from bufP until complete or until bufP
* is empty in which it will return IX_I2C_SLAVE_WRITE_BUFFER_EMPTY. If in
* interrupt mode, the callback will be used.
*
* @return
* - IX_I2C_SUCCESS - The I2C driver transferred the data successfully.
* - IX_I2C_SLAVE_WRITE_BUFFER_EMPTY - The I2C driver needs more data to
* transmit.
* - IX_I2C_SLAVE_WRITE_ERROR -The I2C driver didn't manage to detect the
* IDBR Tx empty bit or the slave stop bit.
* - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
* - IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL
* - IX_I2C_NULL_POINTER - dataSizeXmtd is NULL
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : no
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvSlaveDataTransmit(
char *bufP,
UINT32 dataSize,
UINT32 *dataSizeXmtd);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvSlaveOrGenCallBufReplenish(
char *bufP,
UINT32 bufSize)
*
* @brief Replenishes the buffer which stores buffer info for both slave and
* general call
*
* @param "char [in] *bufP" - pointer to the buffer allocated
* "UINT32 [in] bufSize" - size of the buffer
*
* Global Data :
* - None.
*
* This API is only used in interrupt mode for replenishing the same buffer
* that is used by both slave and generall call by updating the buffer info
* with new info and clearing previous offsets set by previous transfers.
*
* @return
* - None
*
* @li Reentrant : no
* @li ISR Callable : no
*
*/
PUBLIC void
ixI2cDrvSlaveOrGenCallBufReplenish(
char *bufP,
UINT32 bufSize);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats)
*
* @brief Returns the I2C Statistics through the pointer passed in
*
* @param - "IxI2cStatsCounters [out] *I2cStats" - I2C statistics counter will
* be read and written to the location pointed by this pointer.
*
* Global Data :
* - None.
*
* This API will return the statistics counters of the I2C driver.
*
* @return
* - IX_I2C_NULL_POINTER - pointer passed in is NULL
* - IX_I2C_SUCCESS - successfully obtained I2C statistics
*
* @li Reentrant : yes
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvStatsReset(void)
*
* @brief Reset I2C statistics counters.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will reset the statistics counters of the I2C driver.
*
* @return
* - None
*
* @li Reentrant : yes
* @li ISR Callable : no
*
*/
PUBLIC void
ixI2cDrvStatsReset(void);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvShow(void)
*
* @brief Displays the I2C status register and the statistics counter.
*
* @param - None
*
* Global Data :
* - None.
*
* This API will display the I2C Status register and is useful if any error
* occurs. It displays the detection of bus error, slave address, general call,
* address, IDBR receive full, IDBR transmit empty, arbitration loss, slave
* STOP signal, I2C bus busy, unit busy, ack/nack, and read/write mode. It will
* also call the ixI2cDrvGetStats and then display the statistics counter.
*
* @return
* - IX_I2C_SUCCESS - successfully displayed statistics and status register
* - IX_I2C_NOT_INIT - I2C not init yet.
*
* @li Reentrant : yes
* @li ISR Callable : no
*
*/
PUBLIC IX_I2C_STATUS
ixI2cDrvShow(void);
/**
* @ingroup IxI2cDrv
*
* @fn ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayMechanismSelect)
*
* @brief Sets the delay type of either looping delay or OS scheduler delay
* according to the argument provided.
*
* @param - "IxI2cDelayMode [in] delayTypeSelect" - the I2C delay type selected
*
* Global Data :
* - None.
*
* This API will set the delay type used by the I2C Driver to either looping
* delay or OS scheduler delay.
*
* @return
* - None
*
* @li Reentrant : yes
* @li ISR Callable : no
*
*/
PUBLIC void
ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayTypeSelect);
#endif /* __ixp46X */
#endif /* IXI2CDRV_H */