upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
306 lines
8.6 KiB
306 lines
8.6 KiB
/*
|
|
* (C) Copyright 2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/mx5x_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/errno.h>
|
|
#include <netdev.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <asm/gpio.h>
|
|
|
|
#define ETHERNET_INT (1 * 32 + 31) /* GPIO2_31 */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init(void)
|
|
{
|
|
u32 size1, size2;
|
|
|
|
size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
|
|
size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
|
|
|
|
gd->ram_size = size1 + size2;
|
|
|
|
return 0;
|
|
}
|
|
void dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
/* UART1 RXD */
|
|
mxc_request_iomux(MX53_PIN_ATA_DMACK, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DMACK,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
|
|
|
|
/* UART1 TXD */
|
|
mxc_request_iomux(MX53_PIN_ATA_DIOW, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DIOW,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
|
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg esdhc_cfg[2] = {
|
|
{MMC_SDHC1_BASE_ADDR, 1 },
|
|
{MMC_SDHC2_BASE_ADDR, 1 },
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret;
|
|
|
|
mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(1);
|
|
mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(4);
|
|
|
|
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
|
|
ret = !gpio_get_value(1); /* GPIO1_1 */
|
|
else
|
|
ret = !gpio_get_value(4); /* GPIO1_4 */
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
u32 index;
|
|
s32 status = 0;
|
|
|
|
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
|
|
switch (index) {
|
|
case 0:
|
|
mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA0,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA1,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA2,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD1_DATA3,
|
|
IOMUX_CONFIG_ALT0);
|
|
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 0x1E4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 0xD4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 0x1D4);
|
|
break;
|
|
case 1:
|
|
mxc_request_iomux(MX53_PIN_SD2_CMD,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX53_PIN_SD2_CLK,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX53_PIN_SD2_DATA0,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD2_DATA1,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD2_DATA2,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_SD2_DATA3,
|
|
IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA12,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA13,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA14,
|
|
IOMUX_CONFIG_ALT2);
|
|
mxc_request_iomux(MX53_PIN_ATA_DATA15,
|
|
IOMUX_CONFIG_ALT2);
|
|
|
|
mxc_iomux_set_pad(MX53_PIN_SD2_CMD, 0x1E4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD2_CLK, 0xD4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD2_DATA0, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD2_DATA1, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD2_DATA2, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_SD2_DATA3, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA12, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA13, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA14, 0x1D4);
|
|
mxc_iomux_set_pad(MX53_PIN_ATA_DATA15, 0x1D4);
|
|
break;
|
|
default:
|
|
printf("Warning: you configured more ESDHC controller"
|
|
"(%d) as supported by the board(2)\n",
|
|
CONFIG_SYS_FSL_ESDHC_NUM);
|
|
return status;
|
|
}
|
|
status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
#endif
|
|
|
|
static void weim_smc911x_iomux(void)
|
|
{
|
|
/* ETHERNET_INT as GPIO2_31 */
|
|
mxc_request_iomux(MX53_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
|
|
gpio_direction_input(ETHERNET_INT);
|
|
|
|
/* Data bus */
|
|
mxc_request_iomux(MX53_PIN_EIM_D16, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D16, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D17, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D17, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D18, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D18, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D19, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D20, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D20, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D21, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D21, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D22, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D22, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D23, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D23, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D24, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D25, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D25, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D26, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D26, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D27, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D27, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D28, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D28, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D29, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D29, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D30, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D30, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_D31, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_D31, 0xA4);
|
|
|
|
/* Address lines */
|
|
mxc_request_iomux(MX53_PIN_EIM_DA0, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA0, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA1, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA1, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA2, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA2, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA3, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA3, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA4, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA4, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA5, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA5, 0xA4);
|
|
|
|
mxc_request_iomux(MX53_PIN_EIM_DA6, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX53_PIN_EIM_DA6, 0xA4);
|
|
|
|
/* other EIM signals for ethernet */
|
|
mxc_request_iomux(MX53_PIN_EIM_OE, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_EIM_RW, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX53_PIN_EIM_CS1, IOMUX_CONFIG_ALT0);
|
|
}
|
|
|
|
static void weim_cs1_settings(void)
|
|
{
|
|
struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
|
|
|
|
writel(MX53ARD_CS1GCR1, &weim_regs->cs1gcr1);
|
|
writel(0x0, &weim_regs->cs1gcr2);
|
|
writel(MX53ARD_CS1RCR1, &weim_regs->cs1rcr1);
|
|
writel(MX53ARD_CS1RCR2, &weim_regs->cs1rcr2);
|
|
writel(MX53ARD_CS1WCR1, &weim_regs->cs1wcr1);
|
|
writel(0x0, &weim_regs->cs1wcr2);
|
|
writel(0x0, &weim_regs->wcr);
|
|
|
|
set_chipselect_size(CS0_64M_CS1_64M);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = -ENODEV;
|
|
|
|
weim_smc911x_iomux();
|
|
weim_cs1_settings();
|
|
|
|
#ifdef CONFIG_SMC911X
|
|
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: MX53ARD\n");
|
|
|
|
return 0;
|
|
}
|
|
|