upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
535 lines
13 KiB
535 lines
13 KiB
/*
|
|
* (C) Copyright 2008
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/ppc440.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <i2c.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/4xx_pcie.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
#include <asm/errno.h>
|
|
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct board_bcsr {
|
|
u8 board_id;
|
|
u8 cpld_rev;
|
|
u8 led_user;
|
|
u8 board_status;
|
|
u8 reset_ctrl;
|
|
u8 flash_ctrl;
|
|
u8 eth_ctrl;
|
|
u8 usb_ctrl;
|
|
u8 irq_ctrl;
|
|
};
|
|
|
|
#define BOARD_CANYONLANDS_PCIE 1
|
|
#define BOARD_CANYONLANDS_SATA 2
|
|
#define BOARD_GLACIER 3
|
|
#define BOARD_ARCHES 4
|
|
|
|
/*
|
|
* Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
|
|
* board specific values.
|
|
*/
|
|
#if defined(CONFIG_ARCHES)
|
|
u32 ddr_wrdtr(u32 default_val) {
|
|
return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_0_DEG | 0x823);
|
|
}
|
|
#else
|
|
u32 ddr_wrdtr(u32 default_val) {
|
|
return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
|
|
}
|
|
|
|
u32 ddr_clktr(u32 default_val) {
|
|
return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCHES)
|
|
/*
|
|
* FPGA read/write helper macros
|
|
*/
|
|
static inline int board_fpga_read(int offset)
|
|
{
|
|
int data;
|
|
|
|
data = in_8((void *)(CONFIG_SYS_FPGA_BASE + offset));
|
|
|
|
return data;
|
|
}
|
|
|
|
static inline void board_fpga_write(int offset, int data)
|
|
{
|
|
out_8((void *)(CONFIG_SYS_FPGA_BASE + offset), data);
|
|
}
|
|
|
|
/*
|
|
* CPLD read/write helper macros
|
|
*/
|
|
static inline int board_cpld_read(int offset)
|
|
{
|
|
int data;
|
|
|
|
out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
|
|
data = in_8((void *)(CONFIG_SYS_CPLD_DATA));
|
|
|
|
return data;
|
|
}
|
|
|
|
static inline void board_cpld_write(int offset, int data)
|
|
{
|
|
out_8((void *)(CONFIG_SYS_CPLD_ADDR), offset);
|
|
out_8((void *)(CONFIG_SYS_CPLD_DATA), data);
|
|
}
|
|
#else
|
|
static int pvr_460ex(void)
|
|
{
|
|
u32 pvr = get_pvr();
|
|
|
|
if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA) ||
|
|
(pvr == PVR_460EX_RB))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* defined(CONFIG_ARCHES) */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#if !defined(CONFIG_ARCHES)
|
|
u32 sdr0_cust0;
|
|
struct board_bcsr *bcsr_data =
|
|
(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
|
|
mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC3ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC3CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all */
|
|
|
|
#if !defined(CONFIG_ARCHES)
|
|
/* SDR Setting - enable NDFC */
|
|
mfsdr(SDR0_CUST0, sdr0_cust0);
|
|
sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
|
|
SDR0_CUST0_NDFC_ENABLE |
|
|
SDR0_CUST0_NDFC_BW_8_BIT |
|
|
SDR0_CUST0_NDFC_ARE_MASK |
|
|
SDR0_CUST0_NDFC_BAC_ENCODE(3) |
|
|
(0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
|
|
mtsdr(SDR0_CUST0, sdr0_cust0);
|
|
#endif
|
|
|
|
/*
|
|
* Configure PFC (Pin Function Control) registers
|
|
* UART0: 4 pins
|
|
*/
|
|
mtsdr(SDR0_PFC1, 0x00040000);
|
|
|
|
/* Enable PCI host functionality in SDR0_PCI0 */
|
|
mtsdr(SDR0_PCI0, 0xe0000000);
|
|
|
|
#if !defined(CONFIG_ARCHES)
|
|
/* Enable ethernet and take out of reset */
|
|
out_8(&bcsr_data->eth_ctrl, 0) ;
|
|
|
|
/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
|
|
out_8(&bcsr_data->flash_ctrl, 0) ;
|
|
mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
|
|
|
|
/* Setup PLB4-AHB bridge based on the system address map */
|
|
mtdcr(AHB_TOP, 0x8000004B);
|
|
mtdcr(AHB_BOT, 0x8000004B);
|
|
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
|
|
int usb_board_init(void)
|
|
{
|
|
struct board_bcsr *bcsr_data =
|
|
(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
|
|
u8 val;
|
|
|
|
/* Enable USB host & USB-OTG */
|
|
val = in_8(&bcsr_data->usb_ctrl);
|
|
val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
|
|
out_8(&bcsr_data->usb_ctrl, val);
|
|
|
|
/*
|
|
* Configure USB-STP pins as alternate and not GPIO
|
|
* It seems to be neccessary to configure the STP pins as GPIO
|
|
* input at powerup (perhaps while USB reset is asserted). So
|
|
* we configure those pins to their "real" function now.
|
|
*/
|
|
gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
|
|
gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_board_stop(void)
|
|
{
|
|
struct board_bcsr *bcsr_data =
|
|
(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
|
|
u8 val;
|
|
|
|
/* Disable USB host & USB-OTG */
|
|
val = in_8(&bcsr_data->usb_ctrl);
|
|
val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
|
|
out_8(&bcsr_data->usb_ctrl, val);
|
|
|
|
/* Reconfigure USB-STP pins as input */
|
|
gpio_config(16, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(19, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_board_init_fail(void)
|
|
{
|
|
return usb_board_stop();
|
|
}
|
|
#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */
|
|
|
|
#if !defined(CONFIG_ARCHES)
|
|
static void canyonlands_sata_init(int board_type)
|
|
{
|
|
u32 reg;
|
|
|
|
if (board_type == BOARD_CANYONLANDS_SATA) {
|
|
/* Put SATA in reset */
|
|
SDR_WRITE(SDR0_SRST1, 0x00020001);
|
|
|
|
/* Set the phy for SATA, not PCI-E port 0 */
|
|
reg = SDR_READ(PESDR0_PHY_CTL_RST);
|
|
SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001);
|
|
reg = SDR_READ(PESDR0_L0CLK);
|
|
SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007);
|
|
SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111);
|
|
SDR_WRITE(PESDR0_L0DRV, 0x00000104);
|
|
|
|
/* Bring SATA out of reset */
|
|
SDR_WRITE(SDR0_SRST1, 0x00000000);
|
|
}
|
|
}
|
|
#endif /* !defined(CONFIG_ARCHES) */
|
|
|
|
int get_cpu_num(void)
|
|
{
|
|
int cpu = NA_OR_UNKNOWN_CPU;
|
|
|
|
#if defined(CONFIG_ARCHES)
|
|
int cpu_num;
|
|
|
|
cpu_num = board_fpga_read(0x3);
|
|
|
|
/* sanity check; assume cpu numbering starts and increments from 0 */
|
|
if ((cpu_num >= 0) && (cpu_num < CONFIG_BD_NUM_CPUS))
|
|
cpu = cpu_num;
|
|
#endif
|
|
|
|
return cpu;
|
|
}
|
|
|
|
#if !defined(CONFIG_ARCHES)
|
|
int checkboard(void)
|
|
{
|
|
struct board_bcsr *bcsr_data =
|
|
(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
|
|
if (pvr_460ex()) {
|
|
printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
|
|
if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE)
|
|
gd->board_type = BOARD_CANYONLANDS_PCIE;
|
|
else
|
|
gd->board_type = BOARD_CANYONLANDS_SATA;
|
|
} else {
|
|
printf("Board: Glacier - AMCC PPC460GT Evaluation Board");
|
|
gd->board_type = BOARD_GLACIER;
|
|
}
|
|
|
|
switch (gd->board_type) {
|
|
case BOARD_CANYONLANDS_PCIE:
|
|
case BOARD_GLACIER:
|
|
puts(", 2*PCIe");
|
|
break;
|
|
|
|
case BOARD_CANYONLANDS_SATA:
|
|
puts(", 1*PCIe/1*SATA");
|
|
break;
|
|
}
|
|
|
|
printf(", Rev. %X", in_8(&bcsr_data->cpld_rev));
|
|
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc('\n');
|
|
|
|
canyonlands_sata_init(gd->board_type);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#else /* defined(CONFIG_ARCHES) */
|
|
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
printf("Board: Arches - AMCC DUAL PPC460GT Reference Design\n");
|
|
printf(" Revision %02x.%02x ",
|
|
board_fpga_read(0x0), board_fpga_read(0x1));
|
|
|
|
gd->board_type = BOARD_ARCHES;
|
|
|
|
/* Only CPU0 has access to CPLD registers */
|
|
if (get_cpu_num() == 0) {
|
|
u8 cfg_sw = board_cpld_read(0x1);
|
|
printf("(FPGA=%02x, CPLD=%02x)\n",
|
|
board_fpga_read(0x2), board_cpld_read(0x0));
|
|
printf(" Configuration Switch %d%d%d%d\n",
|
|
((cfg_sw >> 3) & 0x01),
|
|
((cfg_sw >> 2) & 0x01),
|
|
((cfg_sw >> 1) & 0x01),
|
|
((cfg_sw >> 0) & 0x01));
|
|
} else
|
|
printf("(FPGA=%02x, CPLD=xx)\n", board_fpga_read(0x2));
|
|
|
|
|
|
if (s != NULL)
|
|
printf(" Serial# %s\n", s);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* !defined(CONFIG_ARCHES) */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
int board_pcie_first(void)
|
|
{
|
|
/*
|
|
* Canyonlands with SATA enabled has only one PCIe slot
|
|
* (2nd one).
|
|
*/
|
|
if (gd->board_type == BOARD_CANYONLANDS_SATA)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
int board_early_init_r (void)
|
|
{
|
|
/*
|
|
* Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the
|
|
* boot EBC mapping only supports a maximum of 16MBytes
|
|
* (4.ff00.0000 - 4.ffff.ffff).
|
|
* To solve this problem, the FLASH has to get remapped to another
|
|
* EBC address which accepts bigger regions:
|
|
*
|
|
* 0xfc00.0000 -> 4.cc00.0000
|
|
*/
|
|
|
|
/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
|
|
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
|
|
#else
|
|
mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
|
|
#endif
|
|
|
|
/* Remove TLB entry of boot EBC mapping */
|
|
remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
|
|
|
|
/* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */
|
|
program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE,
|
|
TLB_WORD2_I_ENABLE);
|
|
|
|
/*
|
|
* Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
|
|
* 0xfc00.0000 is possible
|
|
*/
|
|
|
|
/*
|
|
* Clear potential errors resulting from auto-calibration.
|
|
* If not done, then we could get an interrupt later on when
|
|
* exceptions are enabled.
|
|
*/
|
|
set_mcsr(get_mcsr());
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(CONFIG_ARCHES)
|
|
int misc_init_r(void)
|
|
{
|
|
u32 sdr0_srst1 = 0;
|
|
u32 eth_cfg;
|
|
u8 val;
|
|
|
|
/*
|
|
* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
|
|
* This is board specific, so let's do it here.
|
|
*/
|
|
mfsdr(SDR0_ETH_CFG, eth_cfg);
|
|
/* disable SGMII mode */
|
|
eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
|
|
SDR0_ETH_CFG_SGMII1_ENABLE |
|
|
SDR0_ETH_CFG_SGMII0_ENABLE);
|
|
/* Set the for 2 RGMII mode */
|
|
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
|
|
eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
|
|
if (pvr_460ex())
|
|
eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
|
|
else
|
|
eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
|
|
mtsdr(SDR0_ETH_CFG, eth_cfg);
|
|
|
|
/*
|
|
* The AHB Bridge core is held in reset after power-on or reset
|
|
* so enable it now
|
|
*/
|
|
mfsdr(SDR0_SRST1, sdr0_srst1);
|
|
sdr0_srst1 &= ~SDR0_SRST1_AHB;
|
|
mtsdr(SDR0_SRST1, sdr0_srst1);
|
|
|
|
/*
|
|
* RTC/M41T62:
|
|
* Disable square wave output: Batterie will be drained
|
|
* quickly, when this output is not disabled
|
|
*/
|
|
val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa);
|
|
val &= ~0x40;
|
|
i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* defined(CONFIG_ARCHES) */
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u32 eth_cfg = 0;
|
|
u32 eth_pll;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
|
|
* This is board specific, so let's do it here.
|
|
*/
|
|
|
|
/* enable SGMII mode */
|
|
eth_cfg |= (SDR0_ETH_CFG_SGMII0_ENABLE |
|
|
SDR0_ETH_CFG_SGMII1_ENABLE |
|
|
SDR0_ETH_CFG_SGMII2_ENABLE);
|
|
|
|
/* Set EMAC for MDIO */
|
|
eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0;
|
|
|
|
/* bypass the TAHOE0/TAHOE1 cores for U-Boot */
|
|
eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
|
|
|
|
mtsdr(SDR0_ETH_CFG, eth_cfg);
|
|
|
|
/* reset all SGMII interfaces */
|
|
mfsdr(SDR0_SRST1, reg);
|
|
reg |= (SDR0_SRST1_SGMII0 | SDR0_SRST1_SGMII1 | SDR0_SRST1_SGMII2);
|
|
mtsdr(SDR0_SRST1, reg);
|
|
mtsdr(SDR0_ETH_STS, 0xFFFFFFFF);
|
|
mtsdr(SDR0_SRST1, 0x00000000);
|
|
|
|
do {
|
|
mfsdr(SDR0_ETH_PLL, eth_pll);
|
|
} while (!(eth_pll & SDR0_ETH_PLL_PLLLOCK));
|
|
|
|
return 0;
|
|
}
|
|
#endif /* !defined(CONFIG_ARCHES) */
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
extern void __ft_board_setup(void *blob, bd_t *bd);
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
__ft_board_setup(blob, bd);
|
|
|
|
if (gd->board_type == BOARD_CANYONLANDS_SATA) {
|
|
/*
|
|
* When SATA is selected we need to disable the first PCIe
|
|
* node in the device tree, so that Linux doesn't initialize
|
|
* it.
|
|
*/
|
|
fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
|
|
"disabled", sizeof("disabled"), 1);
|
|
}
|
|
|
|
if (gd->board_type == BOARD_CANYONLANDS_PCIE) {
|
|
/*
|
|
* When PCIe is selected we need to disable the SATA
|
|
* node in the device tree, so that Linux doesn't initialize
|
|
* it.
|
|
*/
|
|
fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
|
|
"disabled", sizeof("disabled"), 1);
|
|
}
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
|
|