upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.lynxkdi

1.7 KiB

			   LYNX KDI SUPPORT

Last Update: July 20, 2003
=======================================================================

This file describes support for LynuxWorks KDI within U-Boot. Support
is enabled by defining CONFIG_LYNXKDI.


LYNXOS AND BLUECAT SUPPORTED
============================
Both LynxOS and BlueCat linux KDIs are supported. The implementation
automatically detects which is being booted. When you use mkimage
you should specify "lynxos" for both (see target-specific notes).


SUPPORTED ARCHITECTURE/TARGETS
==============================
The following targets have been tested:

-PowerPC MPC8260ADS


FILES TO LOOK AT
================
include/lynxkdi.h -defines a simple struct passed to a kdi.
common/lynxkdi.c -implements the call to the kdi.
common/cmd_bootm.c -top-level command implementation ("bootm").


====================================================================
TARGET SPECIFIC NOTES
====================================================================

MPC8260ADS
===========
The default LynxOS and BlueCat implementations require some
modifications to the config file.

Edit include/configs/MPC8260ADS.h to use the following:

#define CONFIG_SYS_IMMR 0xFA200000
#define CONFIG_SYS_BCSR 0xFA100000
#define CONFIG_SYS_BR1_PRELIM 0xFA101801

When creating a LynxOS or BlueCat u-boot image using mkimage,
you must specify the following:

Both: -A ppc -O lynxos -T kernel -C none
LynxOS: -a 0x00004000 -e 0x00004020
BlueCat: -a 0x00500000 -e 0x00507000

To pass the MAC address to BlueCat you should define the
"fcc2_ether_addr" parameter in the "bootargs" environment
variable. E.g.:

==> setenv bootargs fcc2_ether_addr=00:11:22:33:44:55:66