upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
241 lines
4.7 KiB
241 lines
4.7 KiB
/*
|
|
* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/arcregs.h>
|
|
|
|
/*
|
|
* Note on the LD/ST addressing modes with address register write-back
|
|
*
|
|
* LD.a same as LD.aw
|
|
*
|
|
* LD.a reg1, [reg2, x] => Pre Incr
|
|
* Eff Addr for load = [reg2 + x]
|
|
*
|
|
* LD.ab reg1, [reg2, x] => Post Incr
|
|
* Eff Addr for load = [reg2]
|
|
*/
|
|
|
|
.macro PUSH reg
|
|
st.a \reg, [%sp, -4]
|
|
.endm
|
|
|
|
.macro PUSHAX aux
|
|
lr %r9, [\aux]
|
|
PUSH %r9
|
|
.endm
|
|
|
|
.macro SAVE_R1_TO_R24
|
|
PUSH %r1
|
|
PUSH %r2
|
|
PUSH %r3
|
|
PUSH %r4
|
|
PUSH %r5
|
|
PUSH %r6
|
|
PUSH %r7
|
|
PUSH %r8
|
|
PUSH %r9
|
|
PUSH %r10
|
|
PUSH %r11
|
|
PUSH %r12
|
|
PUSH %r13
|
|
PUSH %r14
|
|
PUSH %r15
|
|
PUSH %r16
|
|
PUSH %r17
|
|
PUSH %r18
|
|
PUSH %r19
|
|
PUSH %r20
|
|
PUSH %r21
|
|
PUSH %r22
|
|
PUSH %r23
|
|
PUSH %r24
|
|
.endm
|
|
|
|
.macro SAVE_ALL_SYS
|
|
/* saving %r0 to reg->r0 in advance since we read %ecr into it */
|
|
st %r0, [%sp, -8]
|
|
lr %r0, [%ecr] /* all stack addressing is manual so far */
|
|
st %r0, [%sp]
|
|
st %sp, [%sp, -4]
|
|
/* now move %sp to reg->r0 position so we can do "push" automatically */
|
|
sub %sp, %sp, 8
|
|
|
|
SAVE_R1_TO_R24
|
|
PUSH %r25
|
|
PUSH %gp
|
|
PUSH %fp
|
|
PUSH %blink
|
|
PUSHAX %eret
|
|
PUSHAX %erstatus
|
|
PUSH %lp_count
|
|
PUSHAX %lp_end
|
|
PUSHAX %lp_start
|
|
PUSHAX %erbta
|
|
.endm
|
|
|
|
.macro SAVE_EXCEPTION_SOURCE
|
|
#ifdef CONFIG_MMU
|
|
/* If MMU exists exception faulting address is loaded in EFA reg */
|
|
lr %r0, [%efa]
|
|
#else
|
|
/* Otherwise in ERET (exception return) reg */
|
|
lr %r0, [%eret]
|
|
#endif
|
|
.endm
|
|
|
|
ENTRY(_start)
|
|
/* Setup interrupt vector base that matches "__text_start" */
|
|
sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
|
|
|
|
/* Setup stack pointer */
|
|
mov %sp, CONFIG_SYS_INIT_SP_ADDR
|
|
mov %fp, %sp
|
|
|
|
/* Clear bss */
|
|
mov %r0, __bss_start
|
|
mov %r1, __bss_end
|
|
|
|
clear_bss:
|
|
st.ab 0, [%r0, 4]
|
|
brlt %r0, %r1, clear_bss
|
|
|
|
/* Zero the one and only argument of "board_init_f" */
|
|
mov_s %r0, 0
|
|
j board_init_f
|
|
ENDPROC(_start)
|
|
|
|
ENTRY(memory_error)
|
|
SAVE_ALL_SYS
|
|
SAVE_EXCEPTION_SOURCE
|
|
mov %r1, %sp
|
|
j do_memory_error
|
|
ENDPROC(memory_error)
|
|
|
|
ENTRY(instruction_error)
|
|
SAVE_ALL_SYS
|
|
SAVE_EXCEPTION_SOURCE
|
|
mov %r1, %sp
|
|
j do_instruction_error
|
|
ENDPROC(instruction_error)
|
|
|
|
ENTRY(interrupt_handler)
|
|
/* Todo - save and restore CPU context when interrupts will be in use */
|
|
bl do_interrupt_handler
|
|
rtie
|
|
ENDPROC(interrupt_handler)
|
|
|
|
ENTRY(EV_MachineCheck)
|
|
SAVE_ALL_SYS
|
|
SAVE_EXCEPTION_SOURCE
|
|
mov %r1, %sp
|
|
j do_machine_check_fault
|
|
ENDPROC(EV_MachineCheck)
|
|
|
|
ENTRY(EV_TLBMissI)
|
|
SAVE_ALL_SYS
|
|
mov %r0, %sp
|
|
j do_itlb_miss
|
|
ENDPROC(EV_TLBMissI)
|
|
|
|
ENTRY(EV_TLBMissD)
|
|
SAVE_ALL_SYS
|
|
mov %r0, %sp
|
|
j do_dtlb_miss
|
|
ENDPROC(EV_TLBMissD)
|
|
|
|
ENTRY(EV_TLBProtV)
|
|
SAVE_ALL_SYS
|
|
SAVE_EXCEPTION_SOURCE
|
|
mov %r1, %sp
|
|
j do_tlb_prot_violation
|
|
ENDPROC(EV_TLBProtV)
|
|
|
|
ENTRY(EV_PrivilegeV)
|
|
SAVE_ALL_SYS
|
|
mov %r0, %sp
|
|
j do_privilege_violation
|
|
ENDPROC(EV_PrivilegeV)
|
|
|
|
ENTRY(EV_Trap)
|
|
SAVE_ALL_SYS
|
|
mov %r0, %sp
|
|
j do_trap
|
|
ENDPROC(EV_Trap)
|
|
|
|
ENTRY(EV_Extension)
|
|
SAVE_ALL_SYS
|
|
mov %r0, %sp
|
|
j do_extension
|
|
ENDPROC(EV_Extension)
|
|
|
|
/*
|
|
* void relocate_code (addr_sp, gd, addr_moni)
|
|
*
|
|
* This "function" does not return, instead it continues in RAM
|
|
* after relocating the monitor code.
|
|
*
|
|
* r0 = start_addr_sp
|
|
* r1 = new__gd
|
|
* r2 = relocaddr
|
|
*/
|
|
ENTRY(relocate_code)
|
|
/*
|
|
* r0-r12 might be clobbered by C functions
|
|
* so we use r13-r16 for storage here
|
|
*/
|
|
mov %r13, %r0 /* save addr_sp */
|
|
mov %r14, %r1 /* save addr of gd */
|
|
mov %r15, %r2 /* save addr of destination */
|
|
|
|
mov %r16, %r2 /* %r9 - relocation offset */
|
|
sub %r16, %r16, __image_copy_start
|
|
|
|
/* Set up the stack */
|
|
stack_setup:
|
|
mov %sp, %r13
|
|
mov %fp, %sp
|
|
|
|
/* Check if monitor is loaded right in place for relocation */
|
|
mov %r0, __image_copy_start
|
|
cmp %r0, %r15 /* skip relocation if code loaded */
|
|
bz do_board_init_r /* in target location already */
|
|
|
|
/* Copy data (__image_copy_start - __image_copy_end) to new location */
|
|
mov %r1, %r15
|
|
mov %r2, __image_copy_end
|
|
sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
|
|
asr %r2, %r2, 2 /* r3 <- amount of words to copy */
|
|
mov %lp_count, %r2
|
|
lp copy_end
|
|
ld.ab %r2,[%r0,4]
|
|
st.ab %r2,[%r1,4]
|
|
copy_end:
|
|
|
|
/* Fix relocations related issues */
|
|
bl do_elf_reloc_fixups
|
|
#ifndef CONFIG_SYS_ICACHE_OFF
|
|
bl invalidate_icache_all
|
|
#endif
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
bl flush_dcache_all
|
|
#endif
|
|
|
|
/* Update position of intterupt vector table */
|
|
lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
|
|
add %r0, %r0, %r16 /* Update address */
|
|
sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
|
|
|
|
do_board_init_r:
|
|
/* Prepare for exection of "board_init_r" in relocated monitor */
|
|
mov %r2, board_init_r /* old address of "board_init_r()" */
|
|
add %r2, %r2, %r16 /* new address of "board_init_r()" */
|
|
mov %r0, %r14 /* 1-st parameter: gd_t */
|
|
mov %r1, %r15 /* 2-nd parameter: dest_addr */
|
|
j [%r2]
|
|
ENDPROC(relocate_code)
|
|
|