upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/mmc/dw_mmc.c

426 lines
9.6 KiB

/*
* (C) Copyright 2012 SAMSUNG Electronics
* Jaehoon Chung <jh80.chung@samsung.com>
* Rajeshawari Shinde <rajeshwari.s@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <bouncebuf.h>
#include <common.h>
#include <errno.h>
#include <malloc.h>
#include <memalign.h>
#include <mmc.h>
#include <dwmmc.h>
#include <asm-generic/errno.h>
#define PAGE_SIZE 4096
static int dwmci_wait_reset(struct dwmci_host *host, u32 value)
{
unsigned long timeout = 1000;
u32 ctrl;
dwmci_writel(host, DWMCI_CTRL, value);
while (timeout--) {
ctrl = dwmci_readl(host, DWMCI_CTRL);
if (!(ctrl & DWMCI_RESET_ALL))
return 1;
}
return 0;
}
static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
u32 desc0, u32 desc1, u32 desc2)
{
struct dwmci_idmac *desc = idmac;
desc->flags = desc0;
desc->cnt = desc1;
desc->addr = desc2;
desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac);
}
static void dwmci_prepare_data(struct dwmci_host *host,
struct mmc_data *data,
struct dwmci_idmac *cur_idmac,
void *bounce_buffer)
{
unsigned long ctrl;
unsigned int i = 0, flags, cnt, blk_cnt;
ulong data_start, data_end;
blk_cnt = data->blocks;
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
data_start = (ulong)cur_idmac;
dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
do {
flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
if (blk_cnt <= 8) {
flags |= DWMCI_IDMAC_LD;
cnt = data->blocksize * blk_cnt;
} else
cnt = data->blocksize * 8;
dwmci_set_idma_desc(cur_idmac, flags, cnt,
(u32)bounce_buffer + (i * PAGE_SIZE));
if (blk_cnt <= 8)
break;
blk_cnt -= 8;
cur_idmac++;
i++;
} while(1);
data_end = (ulong)cur_idmac;
flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
ctrl = dwmci_readl(host, DWMCI_CTRL);
ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN;
dwmci_writel(host, DWMCI_CTRL, ctrl);
ctrl = dwmci_readl(host, DWMCI_BMOD);
ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN;
dwmci_writel(host, DWMCI_BMOD, ctrl);
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks);
}
static int dwmci_set_transfer_mode(struct dwmci_host *host,
struct mmc_data *data)
{
unsigned long mode;
mode = DWMCI_CMD_DATA_EXP;
if (data->flags & MMC_DATA_WRITE)
mode |= DWMCI_CMD_RW;
return mode;
}
static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
struct dwmci_host *host = mmc->priv;
ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac,
data ? DIV_ROUND_UP(data->blocks, 8) : 0);
int ret = 0, flags = 0, i;
unsigned int timeout = 100000;
u32 retry = 10000;
u32 mask, ctrl;
ulong start = get_timer(0);
struct bounce_buffer bbstate;
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
if (get_timer(start) > timeout) {
debug("%s: Timeout on data busy\n", __func__);
return TIMEOUT;
}
}
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
if (data) {
if (data->flags == MMC_DATA_READ) {
bounce_buffer_start(&bbstate, (void*)data->dest,
data->blocksize *
data->blocks, GEN_BB_WRITE);
} else {
bounce_buffer_start(&bbstate, (void*)data->src,
data->blocksize *
data->blocks, GEN_BB_READ);
}
dwmci_prepare_data(host, data, cur_idmac,
bbstate.bounce_buffer);
}
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
if (data)
flags = dwmci_set_transfer_mode(host, data);
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
return -1;
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
flags |= DWMCI_CMD_ABORT_STOP;
else
flags |= DWMCI_CMD_PRV_DAT_WAIT;
if (cmd->resp_type & MMC_RSP_PRESENT) {
flags |= DWMCI_CMD_RESP_EXP;
if (cmd->resp_type & MMC_RSP_136)
flags |= DWMCI_CMD_RESP_LENGTH;
}
if (cmd->resp_type & MMC_RSP_CRC)
flags |= DWMCI_CMD_CHECK_CRC;
flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG);
debug("Sending CMD%d\n",cmd->cmdidx);
dwmci_writel(host, DWMCI_CMD, flags);
for (i = 0; i < retry; i++) {
mask = dwmci_readl(host, DWMCI_RINTSTS);
if (mask & DWMCI_INTMSK_CDONE) {
if (!data)
dwmci_writel(host, DWMCI_RINTSTS, mask);
break;
}
}
if (i == retry) {
debug("%s: Timeout.\n", __func__);
return TIMEOUT;
}
if (mask & DWMCI_INTMSK_RTO) {
/*
* Timeout here is not necessarily fatal. (e)MMC cards
* will splat here when they receive CMD55 as they do
* not support this command and that is exactly the way
* to tell them apart from SD cards. Thus, this output
* below shall be debug(). eMMC cards also do not favor
* CMD8, please keep that in mind.
*/
debug("%s: Response Timeout.\n", __func__);
return TIMEOUT;
} else if (mask & DWMCI_INTMSK_RE) {
debug("%s: Response Error.\n", __func__);
return -EIO;
}
if (cmd->resp_type & MMC_RSP_PRESENT) {
if (cmd->resp_type & MMC_RSP_136) {
cmd->response[0] = dwmci_readl(host, DWMCI_RESP3);
cmd->response[1] = dwmci_readl(host, DWMCI_RESP2);
cmd->response[2] = dwmci_readl(host, DWMCI_RESP1);
cmd->response[3] = dwmci_readl(host, DWMCI_RESP0);
} else {
cmd->response[0] = dwmci_readl(host, DWMCI_RESP0);
}
}
if (data) {
start = get_timer(0);
timeout = 240000;
for (;;) {
mask = dwmci_readl(host, DWMCI_RINTSTS);
/* Error during data transfer. */
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
debug("%s: DATA ERROR!\n", __func__);
ret = -EINVAL;
break;
}
/* Data arrived correctly. */
if (mask & DWMCI_INTMSK_DTO) {
ret = 0;
break;
}
/* Check for timeout. */
if (get_timer(start) > timeout) {
debug("%s: Timeout waiting for data!\n",
__func__);
ret = TIMEOUT;
break;
}
}
dwmci_writel(host, DWMCI_RINTSTS, mask);
ctrl = dwmci_readl(host, DWMCI_CTRL);
ctrl &= ~(DWMCI_DMA_EN);
dwmci_writel(host, DWMCI_CTRL, ctrl);
bounce_buffer_stop(&bbstate);
}
udelay(100);
return ret;
}
static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
{
u32 div, status;
int timeout = 10000;
unsigned long sclk;
if ((freq == host->clock) || (freq == 0))
return 0;
/*
* If host->get_mmc_clk isn't defined,
* then assume that host->bus_hz is source clock value.
* host->bus_hz should be set by user.
*/
if (host->get_mmc_clk)
sclk = host->get_mmc_clk(host, freq);
else if (host->bus_hz)
sclk = host->bus_hz;
else {
debug("%s: Didn't get source clock value.\n", __func__);
return -EINVAL;
}
if (sclk == freq)
div = 0; /* bypass mode */
else
div = DIV_ROUND_UP(sclk, 2 * freq);
dwmci_writel(host, DWMCI_CLKENA, 0);
dwmci_writel(host, DWMCI_CLKSRC, 0);
dwmci_writel(host, DWMCI_CLKDIV, div);
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
debug("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE |
DWMCI_CLKEN_LOW_PWR);
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
timeout = 10000;
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
debug("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
host->clock = freq;
return 0;
}
static void dwmci_set_ios(struct mmc *mmc)
{
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
u32 ctype, regs;
debug("Buswidth = %d, clock: %d\n", mmc->bus_width, mmc->clock);
dwmci_setup_bus(host, mmc->clock);
switch (mmc->bus_width) {
case 8:
ctype = DWMCI_CTYPE_8BIT;
break;
case 4:
ctype = DWMCI_CTYPE_4BIT;
break;
default:
ctype = DWMCI_CTYPE_1BIT;
break;
}
dwmci_writel(host, DWMCI_CTYPE, ctype);
regs = dwmci_readl(host, DWMCI_UHS_REG);
if (mmc->ddr_mode)
regs |= DWMCI_DDR_MODE;
else
regs &= ~DWMCI_DDR_MODE;
dwmci_writel(host, DWMCI_UHS_REG, regs);
if (host->clksel)
host->clksel(host);
}
static int dwmci_init(struct mmc *mmc)
{
struct dwmci_host *host = mmc->priv;
if (host->board_init)
host->board_init(host);
dwmci_writel(host, DWMCI_PWREN, 1);
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
debug("%s[%d] Fail-reset!!\n", __func__, __LINE__);
return -EIO;
}
/* Enumerate at 400KHz */
dwmci_setup_bus(host, mmc->cfg->f_min);
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
dwmci_writel(host, DWMCI_INTMASK, 0);
dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF);
dwmci_writel(host, DWMCI_IDINTEN, 0);
dwmci_writel(host, DWMCI_BMOD, 1);
if (!host->fifoth_val) {
uint32_t fifo_size;
fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
TX_WMARK(fifo_size / 2);
}
dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
dwmci_writel(host, DWMCI_CLKENA, 0);
dwmci_writel(host, DWMCI_CLKSRC, 0);
return 0;
}
static const struct mmc_ops dwmci_ops = {
.send_cmd = dwmci_send_cmd,
.set_ios = dwmci_set_ios,
.init = dwmci_init,
};
int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
{
host->cfg.name = host->name;
host->cfg.ops = &dwmci_ops;
host->cfg.f_min = min_clk;
host->cfg.f_max = max_clk;
host->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
host->cfg.host_caps = host->caps;
if (host->buswidth == 8) {
host->cfg.host_caps |= MMC_MODE_8BIT;
host->cfg.host_caps &= ~MMC_MODE_4BIT;
} else {
host->cfg.host_caps |= MMC_MODE_4BIT;
host->cfg.host_caps &= ~MMC_MODE_8BIT;
}
host->cfg.host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
host->mmc = mmc_create(&host->cfg, host);
if (host->mmc == NULL)
return -1;
return 0;
}