upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
468 lines
12 KiB
468 lines
12 KiB
/*
|
|
* Copyright 2006, 2008 Freescale Semiconductor
|
|
* York Sun (yorksun@freescale.com)
|
|
* Haiying Wang (haiying.wang@freescale.com)
|
|
* Timur Tabi (timur@freescale.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <i2c.h>
|
|
#include <linux/ctype.h>
|
|
|
|
#include "../common/eeprom.h"
|
|
|
|
#if !defined(CONFIG_SYS_I2C_EEPROM_CCID) && !defined(CONFIG_SYS_I2C_EEPROM_NXID)
|
|
#error "Please define either CONFIG_SYS_I2C_EEPROM_CCID or CONFIG_SYS_I2C_EEPROM_NXID"
|
|
#endif
|
|
|
|
/**
|
|
* static eeprom: EEPROM layout for CCID or NXID formats
|
|
*
|
|
* See application note AN3638 for details.
|
|
*/
|
|
static struct __attribute__ ((__packed__)) eeprom {
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_CCID
|
|
u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */
|
|
u8 major; /* 0x04 Board revision, major */
|
|
u8 minor; /* 0x05 Board revision, minor */
|
|
u8 sn[10]; /* 0x06 - 0x0F Serial Number*/
|
|
u8 errata[2]; /* 0x10 - 0x11 Errata Level */
|
|
u8 date[6]; /* 0x12 - 0x17 Build Date */
|
|
u8 res_0[40]; /* 0x18 - 0x3f Reserved */
|
|
u8 mac_count; /* 0x40 Number of MAC addresses */
|
|
u8 mac_flag; /* 0x41 MAC table flags */
|
|
u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */
|
|
u32 crc; /* 0x72 CRC32 checksum */
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
|
|
u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */
|
|
u8 sn[12]; /* 0x04 - 0x0F Serial Number */
|
|
u8 errata[5]; /* 0x10 - 0x14 Errata Level */
|
|
u8 date[6]; /* 0x15 - 0x1a Build Date */
|
|
u8 res_0; /* 0x1b Reserved */
|
|
u32 version; /* 0x1c - 0x1f NXID Version */
|
|
u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */
|
|
u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */
|
|
u8 tempcalflags; /* 0x2a Temperature Calibration Flags */
|
|
u8 res_1[21]; /* 0x2b - 0x3f Reserved */
|
|
u8 mac_count; /* 0x40 Number of MAC addresses */
|
|
u8 mac_flag; /* 0x41 MAC table flags */
|
|
u8 mac[8][6]; /* 0x42 - 0x71 MAC addresses */
|
|
u32 crc; /* 0x72 CRC32 checksum */
|
|
#endif
|
|
} e;
|
|
|
|
/* Set to 1 if we've read EEPROM into memory */
|
|
static int has_been_read = 0;
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
|
|
/* Is this a valid NXID EEPROM? */
|
|
#define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D'))
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_CCID
|
|
/* Is this a valid CCID EEPROM? */
|
|
#define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
|
|
#endif
|
|
|
|
/**
|
|
* show_eeprom - display the contents of the EEPROM
|
|
*/
|
|
static void show_eeprom(void)
|
|
{
|
|
int i;
|
|
unsigned int crc;
|
|
|
|
/* EEPROM tag ID, either CCID or NXID */
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
|
|
printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
|
|
be32_to_cpu(e.version));
|
|
#else
|
|
printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
|
|
#endif
|
|
|
|
/* Serial number */
|
|
printf("SN: %s\n", e.sn);
|
|
|
|
/* Errata level. */
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
|
|
printf("Errata: %s\n", e.errata);
|
|
#else
|
|
printf("Errata: %c%c\n",
|
|
e.errata[0] ? e.errata[0] : '.',
|
|
e.errata[1] ? e.errata[1] : '.');
|
|
#endif
|
|
|
|
/* Build date, BCD date values, as YYMMDDhhmmss */
|
|
printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n",
|
|
e.date[0], e.date[1], e.date[2],
|
|
e.date[3] & 0x7F, e.date[4], e.date[5],
|
|
e.date[3] & 0x80 ? "PM" : "");
|
|
|
|
/* Show MAC addresses */
|
|
for (i = 0; i < min(e.mac_count, 8); i++) {
|
|
u8 *p = e.mac[i];
|
|
|
|
printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i,
|
|
p[0], p[1], p[2], p[3], p[4], p[5]);
|
|
}
|
|
|
|
crc = crc32(0, (void *)&e, sizeof(e) - 4);
|
|
|
|
if (crc == be32_to_cpu(e.crc))
|
|
printf("CRC: %08x\n", be32_to_cpu(e.crc));
|
|
else
|
|
printf("CRC: %08x (should be %08x)\n",
|
|
be32_to_cpu(e.crc), crc);
|
|
|
|
#ifdef DEBUG
|
|
printf("EEPROM dump: (0x%x bytes)\n", sizeof(e));
|
|
for (i = 0; i < sizeof(e); i++) {
|
|
if ((i % 16) == 0)
|
|
printf("%02X: ", i);
|
|
printf("%02X ", ((u8 *)&e)[i]);
|
|
if (((i % 16) == 15) || (i == sizeof(e) - 1))
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* read_eeprom - read the EEPROM into memory
|
|
*/
|
|
static int read_eeprom(void)
|
|
{
|
|
int ret;
|
|
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
|
|
unsigned int bus;
|
|
#endif
|
|
|
|
if (has_been_read)
|
|
return 0;
|
|
|
|
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
|
|
bus = i2c_get_bus_num();
|
|
i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
|
|
#endif
|
|
|
|
ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
|
|
(void *)&e, sizeof(e));
|
|
|
|
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
|
|
i2c_set_bus_num(bus);
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
show_eeprom();
|
|
#endif
|
|
|
|
has_been_read = (ret == 0) ? 1 : 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* prog_eeprom - write the EEPROM from memory
|
|
*/
|
|
static int prog_eeprom(void)
|
|
{
|
|
int ret, i, length;
|
|
unsigned int crc;
|
|
void *p;
|
|
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
|
|
unsigned int bus;
|
|
#endif
|
|
|
|
/* Set the reserved values to 0xFF */
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
|
|
e.res_0 = 0xFF;
|
|
memset(e.res_1, 0xFF, sizeof(e.res_1));
|
|
#else
|
|
memset(e.res_0, 0xFF, sizeof(e.res_0));
|
|
#endif
|
|
|
|
length = sizeof(e);
|
|
crc = crc32(0, (void *)&e, length - 4);
|
|
e.crc = cpu_to_be32(crc);
|
|
|
|
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
|
|
bus = i2c_get_bus_num();
|
|
i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
|
|
#endif
|
|
|
|
for (i = 0, p = &e; i < length; i += 8, p += 8) {
|
|
ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
|
|
p, min((length - i), 8));
|
|
if (ret)
|
|
break;
|
|
udelay(5000); /* 5ms write cycle timing */
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
|
|
i2c_set_bus_num(bus);
|
|
#endif
|
|
|
|
if (ret) {
|
|
printf("Programming failed.\n");
|
|
return -1;
|
|
}
|
|
|
|
printf("Programming passed.\n");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* h2i - converts hex character into a number
|
|
*
|
|
* This function takes a hexadecimal character (e.g. '7' or 'C') and returns
|
|
* the integer equivalent.
|
|
*/
|
|
static inline u8 h2i(char p)
|
|
{
|
|
if ((p >= '0') && (p <= '9'))
|
|
return p - '0';
|
|
|
|
if ((p >= 'A') && (p <= 'F'))
|
|
return (p - 'A') + 10;
|
|
|
|
if ((p >= 'a') && (p <= 'f'))
|
|
return (p - 'a') + 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* set_date - stores the build date into the EEPROM
|
|
*
|
|
* This function takes a pointer to a string in the format "YYMMDDhhmmss"
|
|
* (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string,
|
|
* and stores it in the build date field of the EEPROM local copy.
|
|
*/
|
|
static void set_date(const char *string)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (strlen(string) != 12) {
|
|
printf("Usage: mac date YYMMDDhhmmss\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 6; i++)
|
|
e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]);
|
|
}
|
|
|
|
/**
|
|
* set_mac_address - stores a MAC address into the EEPROM
|
|
*
|
|
* This function takes a pointer to MAC address string
|
|
* (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and
|
|
* stores it in one of the MAC address fields of the EEPROM local copy.
|
|
*/
|
|
static void set_mac_address(unsigned int index, const char *string)
|
|
{
|
|
char *p = (char *) string;
|
|
unsigned int i;
|
|
|
|
if (!string) {
|
|
printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; *p && (i < 6); i++) {
|
|
e.mac[index][i] = simple_strtoul(p, &p, 16);
|
|
if (*p == ':')
|
|
p++;
|
|
}
|
|
}
|
|
|
|
int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
int i;
|
|
char cmd;
|
|
|
|
if (argc == 1) {
|
|
show_eeprom();
|
|
return 0;
|
|
}
|
|
|
|
cmd = argv[1][0];
|
|
|
|
if (cmd == 'r') {
|
|
read_eeprom();
|
|
return 0;
|
|
}
|
|
|
|
if ((cmd == 'i') && (argc > 2)) {
|
|
for (i = 0; i < 4; i++)
|
|
e.id[i] = argv[2][i];
|
|
return 0;
|
|
}
|
|
|
|
if (!is_valid) {
|
|
printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (argc == 2) {
|
|
switch (cmd) {
|
|
case 's': /* save */
|
|
prog_eeprom();
|
|
break;
|
|
default:
|
|
printf("Usage:\n%s\n", cmdtp->usage);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* We know we have at least one parameter */
|
|
|
|
switch (cmd) {
|
|
case 'n': /* serial number */
|
|
memset(e.sn, 0, sizeof(e.sn));
|
|
strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
|
|
break;
|
|
case 'e': /* errata */
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
|
|
memset(e.errata, 0, 5);
|
|
strncpy((char *)e.errata, argv[2], 4);
|
|
#else
|
|
e.errata[0] = argv[2][0];
|
|
e.errata[1] = argv[2][1];
|
|
#endif
|
|
break;
|
|
case 'd': /* date BCD format YYMMDDhhmmss */
|
|
set_date(argv[2]);
|
|
break;
|
|
case 'p': /* MAC table size */
|
|
e.mac_count = simple_strtoul(argv[2], NULL, 16);
|
|
break;
|
|
case '0' ... '7': /* "mac 0" through "mac 7" */
|
|
set_mac_address(cmd - '0', argv[2]);
|
|
break;
|
|
case 'h': /* help */
|
|
default:
|
|
printf("Usage:\n%s\n", cmdtp->usage);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mac_read_from_eeprom - read the MAC addresses from EEPROM
|
|
*
|
|
* This function reads the MAC addresses from EEPROM and sets the
|
|
* appropriate environment variables for each one read.
|
|
*
|
|
* The environment variables are only set if they haven't been set already.
|
|
* This ensures that any user-saved variables are never overwritten.
|
|
*
|
|
* This function must be called after relocation.
|
|
*/
|
|
int mac_read_from_eeprom(void)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (read_eeprom()) {
|
|
printf("Read failed.\n");
|
|
return -1;
|
|
}
|
|
|
|
if (!is_valid) {
|
|
printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]);
|
|
return -1;
|
|
}
|
|
|
|
if (be32_to_cpu(e.crc) != 0xFFFFFFFF) {
|
|
u32 crc = crc32(0, (void *)&e, sizeof(e) - 4);
|
|
|
|
if (crc != be32_to_cpu(e.crc)) {
|
|
printf("CRC mismatch (%08x != %08x).\n", crc,
|
|
be32_to_cpu(e.crc));
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < min(4, e.mac_count); i++) {
|
|
if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
|
|
memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
|
|
char ethaddr[18];
|
|
char enetvar[9];
|
|
|
|
sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
|
|
e.mac[i][0],
|
|
e.mac[i][1],
|
|
e.mac[i][2],
|
|
e.mac[i][3],
|
|
e.mac[i][4],
|
|
e.mac[i][5]);
|
|
sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i);
|
|
/* Only initialize environment variables that are blank
|
|
* (i.e. have not yet been set)
|
|
*/
|
|
if (!getenv(enetvar))
|
|
setenv(enetvar, ethaddr);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_CCID
|
|
|
|
/**
|
|
* get_cpu_board_revision - get the CPU board revision on 85xx boards
|
|
*
|
|
* Read the EEPROM to determine the board revision.
|
|
*
|
|
* This function is called before relocation, so we need to read a private
|
|
* copy of the EEPROM into a local variable on the stack.
|
|
*
|
|
* Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM. The global
|
|
* variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM,
|
|
* so that the SPD code will work. This means that all pre-relocation I2C
|
|
* operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus. So if
|
|
* CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when
|
|
* this function is called. Oh well.
|
|
*/
|
|
unsigned int get_cpu_board_revision(void)
|
|
{
|
|
struct board_eeprom {
|
|
u32 id; /* 0x00 - 0x03 EEPROM Tag 'CCID' */
|
|
u8 major; /* 0x04 Board revision, major */
|
|
u8 minor; /* 0x05 Board revision, minor */
|
|
} be;
|
|
|
|
i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
|
|
(void *)&be, sizeof(be));
|
|
|
|
if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
|
|
return MPC85XX_CPU_BOARD_REV(0, 0);
|
|
|
|
if ((be.major == 0xff) && (be.minor == 0xff))
|
|
return MPC85XX_CPU_BOARD_REV(0, 0);
|
|
|
|
return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
|
|
}
|
|
#endif
|
|
|