upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/ddr/marvell/axp/ddr3_sdram.c

669 lines
17 KiB

/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include "ddr3_hw_training.h"
#include "xor.h"
#include "xor_regs.h"
static void ddr3_flush_l1_line(u32 line);
extern u32 pbs_pattern[2][LEN_16BIT_PBS_PATTERN];
extern u32 pbs_pattern_32b[2][LEN_PBS_PATTERN];
#if defined(MV88F78X60)
extern u32 pbs_pattern_64b[2][LEN_PBS_PATTERN];
#endif
extern u32 pbs_dq_mapping[PUP_NUM_64BIT][DQ_NUM];
#if defined(MV88F78X60) || defined(MV88F672X)
/* PBS locked dq (per pup) */
u32 pbs_locked_dq[MAX_PUP_NUM][DQ_NUM] = { { 0 } };
u32 pbs_locked_dm[MAX_PUP_NUM] = { 0 };
u32 pbs_locked_value[MAX_PUP_NUM][DQ_NUM] = { { 0 } };
int per_bit_data[MAX_PUP_NUM][DQ_NUM];
#endif
static u32 sdram_data[LEN_KILLER_PATTERN] __aligned(32) = { 0 };
static struct crc_dma_desc dma_desc __aligned(32) = { 0 };
#define XOR_TIMEOUT 0x8000000
struct xor_channel_t {
struct crc_dma_desc *desc;
unsigned long desc_phys_addr;
};
#define XOR_CAUSE_DONE_MASK(chan) ((0x1 | 0x2) << (chan * 16))
void xor_waiton_eng(int chan)
{
int timeout;
timeout = 0;
while (!(reg_read(XOR_CAUSE_REG(XOR_UNIT(chan))) &
XOR_CAUSE_DONE_MASK(XOR_CHAN(chan)))) {
if (timeout > XOR_TIMEOUT)
goto timeout;
timeout++;
}
timeout = 0;
while (mv_xor_state_get(chan) != MV_IDLE) {
if (timeout > XOR_TIMEOUT)
goto timeout;
timeout++;
}
/* Clear int */
reg_write(XOR_CAUSE_REG(XOR_UNIT(chan)),
~(XOR_CAUSE_DONE_MASK(XOR_CHAN(chan))));
timeout:
return;
}
static int special_compare_pattern(u32 uj)
{
if ((uj == 30) || (uj == 31) || (uj == 61) || (uj == 62) ||
(uj == 93) || (uj == 94) || (uj == 126) || (uj == 127))
return 1;
return 0;
}
/*
* Compare code extracted as its used by multiple functions. This
* reduces code-size and makes it easier to maintain it. Additionally
* the code is not indented that much and therefore easier to read.
*/
static void compare_pattern_v1(u32 uj, u32 *pup, u32 *pattern,
u32 pup_groups, int debug_dqs)
{
u32 val;
u32 uk;
u32 var1;
u32 var2;
__maybe_unused u32 dq;
if (((sdram_data[uj]) != (pattern[uj])) && (*pup != 0xFF)) {
for (uk = 0; uk < PUP_NUM_32BIT; uk++) {
val = CMP_BYTE_SHIFT * uk;
var1 = ((sdram_data[uj] >> val) & CMP_BYTE_MASK);
var2 = ((pattern[uj] >> val) & CMP_BYTE_MASK);
if (var1 != var2) {
*pup |= (1 << (uk + (PUP_NUM_32BIT *
(uj % pup_groups))));
#ifdef MV_DEBUG_DQS
if (!debug_dqs)
continue;
for (dq = 0; dq < DQ_NUM; dq++) {
val = uk + (PUP_NUM_32BIT *
(uj % pup_groups));
if (((var1 >> dq) & 0x1) !=
((var2 >> dq) & 0x1))
per_bit_data[val][dq] = 1;
else
per_bit_data[val][dq] = 0;
}
#endif
}
}
}
}
static void compare_pattern_v2(u32 uj, u32 *pup, u32 *pattern)
{
u32 val;
u32 uk;
u32 var1;
u32 var2;
if (((sdram_data[uj]) != (pattern[uj])) && (*pup != 0x3)) {
/* Found error */
for (uk = 0; uk < PUP_NUM_32BIT; uk++) {
val = CMP_BYTE_SHIFT * uk;
var1 = (sdram_data[uj] >> val) & CMP_BYTE_MASK;
var2 = (pattern[uj] >> val) & CMP_BYTE_MASK;
if (var1 != var2)
*pup |= (1 << (uk % PUP_NUM_16BIT));
}
}
}
/*
* Name: ddr3_sdram_compare
* Desc: Execute compare per PUP
* Args: unlock_pup Bit array of the unlock pups
* new_locked_pup Output bit array of the pups with failed compare
* pattern Pattern to compare
* pattern_len Length of pattern (in bytes)
* sdram_offset offset address to the SDRAM
* write write to the SDRAM before read
* mask compare pattern with mask;
* mask_pattern Mask to compare pattern
*
* Notes:
* Returns: MV_OK if success, other error code if fail.
*/
int ddr3_sdram_compare(MV_DRAM_INFO *dram_info, u32 unlock_pup,
u32 *new_locked_pup, u32 *pattern,
u32 pattern_len, u32 sdram_offset, int write,
int mask, u32 *mask_pattern,
int special_compare)
{
u32 uj;
__maybe_unused u32 pup_groups;
__maybe_unused u32 dq;
#if !defined(MV88F67XX)
if (dram_info->num_of_std_pups == PUP_NUM_64BIT)
pup_groups = 2;
else
pup_groups = 1;
#endif
ddr3_reset_phy_read_fifo();
/* Check if need to write to sdram before read */
if (write == 1)
ddr3_dram_sram_burst((u32)pattern, sdram_offset, pattern_len);
ddr3_dram_sram_burst(sdram_offset, (u32)sdram_data, pattern_len);
/* Compare read result to write */
for (uj = 0; uj < pattern_len; uj++) {
if (special_compare && special_compare_pattern(uj))
continue;
#if defined(MV88F78X60) || defined(MV88F672X)
compare_pattern_v1(uj, new_locked_pup, pattern, pup_groups, 1);
#elif defined(MV88F67XX)
compare_pattern_v2(uj, new_locked_pup, pattern);
#endif
}
return MV_OK;
}
#if defined(MV88F78X60) || defined(MV88F672X)
/*
* Name: ddr3_sdram_dm_compare
* Desc: Execute compare per PUP
* Args: unlock_pup Bit array of the unlock pups
* new_locked_pup Output bit array of the pups with failed compare
* pattern Pattern to compare
* pattern_len Length of pattern (in bytes)
* sdram_offset offset address to the SDRAM
* write write to the SDRAM before read
* mask compare pattern with mask;
* mask_pattern Mask to compare pattern
*
* Notes:
* Returns: MV_OK if success, other error code if fail.
*/
int ddr3_sdram_dm_compare(MV_DRAM_INFO *dram_info, u32 unlock_pup,
u32 *new_locked_pup, u32 *pattern,
u32 sdram_offset)
{
u32 uj, uk, var1, var2, pup_groups;
u32 val;
u32 pup = 0;
if (dram_info->num_of_std_pups == PUP_NUM_64BIT)
pup_groups = 2;
else
pup_groups = 1;
ddr3_dram_sram_burst((u32)pattern, SDRAM_PBS_TX_OFFS,
LEN_PBS_PATTERN);
ddr3_dram_sram_burst(SDRAM_PBS_TX_OFFS, (u32)sdram_data,
LEN_PBS_PATTERN);
/* Validate the correctness of the results */
for (uj = 0; uj < LEN_PBS_PATTERN; uj++)
compare_pattern_v1(uj, &pup, pattern, pup_groups, 0);
/* Test the DM Signals */
*(u32 *)(SDRAM_PBS_TX_OFFS + 0x10) = 0x12345678;
*(u32 *)(SDRAM_PBS_TX_OFFS + 0x14) = 0x12345678;
sdram_data[0] = *(u32 *)(SDRAM_PBS_TX_OFFS + 0x10);
sdram_data[1] = *(u32 *)(SDRAM_PBS_TX_OFFS + 0x14);
for (uj = 0; uj < 2; uj++) {
if (((sdram_data[uj]) != (pattern[uj])) &&
(*new_locked_pup != 0xFF)) {
for (uk = 0; uk < PUP_NUM_32BIT; uk++) {
val = CMP_BYTE_SHIFT * uk;
var1 = ((sdram_data[uj] >> val) & CMP_BYTE_MASK);
var2 = ((pattern[uj] >> val) & CMP_BYTE_MASK);
if (var1 != var2) {
*new_locked_pup |= (1 << (uk +
(PUP_NUM_32BIT * (uj % pup_groups))));
*new_locked_pup |= pup;
}
}
}
}
return MV_OK;
}
/*
* Name: ddr3_sdram_pbs_compare
* Desc: Execute SRAM compare per PUP and DQ.
* Args: pup_locked bit array of locked pups
* is_tx Indicate whether Rx or Tx
* pbs_pattern_idx Index of PBS pattern
* pbs_curr_val The PBS value
* pbs_lock_val The value to set to locked PBS
* skew_array Global array to update with the compare results
* ai_unlock_pup_dq_array bit array of the locked / unlocked pups per dq.
* Notes:
* Returns: MV_OK if success, other error code if fail.
*/
int ddr3_sdram_pbs_compare(MV_DRAM_INFO *dram_info, u32 pup_locked,
int is_tx, u32 pbs_pattern_idx,
u32 pbs_curr_val, u32 pbs_lock_val,
u32 *skew_array, u8 *unlock_pup_dq_array,
u32 ecc)
{
/* bit array failed dq per pup for current compare */
u32 pbs_write_pup[DQ_NUM] = { 0 };
u32 update_pup; /* pup as HW convention */
u32 max_pup; /* maximal pup index */
u32 pup_addr;
u32 ui, dq, pup;
int var1, var2;
u32 sdram_offset, pup_groups, tmp_pup;
u32 *pattern_ptr;
u32 val;
/* Choose pattern */
switch (dram_info->ddr_width) {
#if defined(MV88F672X)
case 16:
pattern_ptr = (u32 *)&pbs_pattern[pbs_pattern_idx];
break;
#endif
case 32:
pattern_ptr = (u32 *)&pbs_pattern_32b[pbs_pattern_idx];
break;
#if defined(MV88F78X60)
case 64:
pattern_ptr = (u32 *)&pbs_pattern_64b[pbs_pattern_idx];
break;
#endif
default:
return MV_FAIL;
}
max_pup = dram_info->num_of_std_pups;
sdram_offset = SDRAM_PBS_I_OFFS + pbs_pattern_idx * SDRAM_PBS_NEXT_OFFS;
if (dram_info->num_of_std_pups == PUP_NUM_64BIT)
pup_groups = 2;
else
pup_groups = 1;
ddr3_reset_phy_read_fifo();
/* Check if need to write to sdram before read */
if (is_tx == 1) {
ddr3_dram_sram_burst((u32)pattern_ptr, sdram_offset,
LEN_PBS_PATTERN);
}
ddr3_dram_sram_read(sdram_offset, (u32)sdram_data, LEN_PBS_PATTERN);
/* Compare read result to write */
for (ui = 0; ui < LEN_PBS_PATTERN; ui++) {
if ((sdram_data[ui]) != (pattern_ptr[ui])) {
/* found error */
/* error in low pup group */
for (pup = 0; pup < PUP_NUM_32BIT; pup++) {
val = CMP_BYTE_SHIFT * pup;
var1 = ((sdram_data[ui] >> val) &
CMP_BYTE_MASK);
var2 = ((pattern_ptr[ui] >> val) &
CMP_BYTE_MASK);
if (var1 != var2) {
if (dram_info->ddr_width > 16) {
tmp_pup = (pup + PUP_NUM_32BIT *
(ui % pup_groups));
} else {
tmp_pup = (pup % PUP_NUM_16BIT);
}
update_pup = (1 << tmp_pup);
if (ecc && (update_pup != 0x1))
continue;
/*
* Pup is failed - Go over all DQs and
* look for failures
*/
for (dq = 0; dq < DQ_NUM; dq++) {
val = tmp_pup * (1 - ecc) +
ecc * ECC_PUP;
if (((var1 >> dq) & 0x1) !=
((var2 >> dq) & 0x1)) {
if (pbs_locked_dq[val][dq] == 1 &&
pbs_locked_value[val][dq] != pbs_curr_val)
continue;
/*
* Activate write to
* update PBS to
* pbs_lock_val
*/
pbs_write_pup[dq] |=
update_pup;
/*
* Update the
* unlock_pup_dq_array
*/
unlock_pup_dq_array[dq] &=
~update_pup;
/*
* Lock PBS value for
* failed bits in
* compare operation
*/
skew_array[tmp_pup * DQ_NUM + dq] =
pbs_curr_val;
}
}
}
}
}
}
pup_addr = (is_tx == 1) ? PUP_PBS_TX : PUP_PBS_RX;
/* Set last failed bits PBS to min / max pbs value */
for (dq = 0; dq < DQ_NUM; dq++) {
for (pup = 0; pup < max_pup; pup++) {
if (pbs_write_pup[dq] & (1 << pup)) {
val = pup * (1 - ecc) + ecc * ECC_PUP;
if (pbs_locked_dq[val][dq] == 1 &&
pbs_locked_value[val][dq] != pbs_curr_val)
continue;
/* Mark the dq as locked */
pbs_locked_dq[val][dq] = 1;
pbs_locked_value[val][dq] = pbs_curr_val;
ddr3_write_pup_reg(pup_addr +
pbs_dq_mapping[val][dq],
CS0, val, 0, pbs_lock_val);
}
}
}
return MV_OK;
}
#endif
/*
* Name: ddr3_sdram_direct_compare
* Desc: Execute compare per PUP without DMA (no burst mode)
* Args: unlock_pup Bit array of the unlock pups
* new_locked_pup Output bit array of the pups with failed compare
* pattern Pattern to compare
* pattern_len Length of pattern (in bytes)
* sdram_offset offset address to the SDRAM
* write write to the SDRAM before read
* mask compare pattern with mask;
* auiMaskPatter Mask to compare pattern
*
* Notes:
* Returns: MV_OK if success, other error code if fail.
*/
int ddr3_sdram_direct_compare(MV_DRAM_INFO *dram_info, u32 unlock_pup,
u32 *new_locked_pup, u32 *pattern,
u32 pattern_len, u32 sdram_offset,
int write, int mask, u32 *mask_pattern)
{
u32 uj, uk, pup_groups;
u32 *sdram_addr; /* used to read from SDRAM */
sdram_addr = (u32 *)sdram_offset;
if (dram_info->num_of_std_pups == PUP_NUM_64BIT)
pup_groups = 2;
else
pup_groups = 1;
/* Check if need to write before read */
if (write == 1) {
for (uk = 0; uk < pattern_len; uk++) {
*sdram_addr = pattern[uk];
sdram_addr++;
}
}
sdram_addr = (u32 *)sdram_offset;
for (uk = 0; uk < pattern_len; uk++) {
sdram_data[uk] = *sdram_addr;
sdram_addr++;
}
/* Compare read result to write */
for (uj = 0; uj < pattern_len; uj++) {
if (dram_info->ddr_width > 16) {
compare_pattern_v1(uj, new_locked_pup, pattern,
pup_groups, 0);
} else {
compare_pattern_v2(uj, new_locked_pup, pattern);
}
}
return MV_OK;
}
/*
* Name: ddr3_dram_sram_burst
* Desc: Read from the SDRAM in burst of 64 bytes
* Args: src
* dst
* Notes: Using the XOR mechanism
* Returns: MV_OK if success, other error code if fail.
*/
int ddr3_dram_sram_burst(u32 src, u32 dst, u32 len)
{
u32 chan, byte_count, cs_num, byte;
struct xor_channel_t channel;
chan = 0;
byte_count = len * 4;
/* Wait for previous transfer completion */
while (mv_xor_state_get(chan) != MV_IDLE)
;
/* Build the channel descriptor */
channel.desc = &dma_desc;
/* Enable Address Override and set correct src and dst */
if (src < SRAM_BASE) {
/* src is DRAM CS, dst is SRAM */
cs_num = (src / (1 + SDRAM_CS_SIZE));
reg_write(XOR_ADDR_OVRD_REG(0, 0),
((cs_num << 1) | (1 << 0)));
channel.desc->src_addr0 = (src % (1 + SDRAM_CS_SIZE));
channel.desc->dst_addr = dst;
} else {
/* src is SRAM, dst is DRAM CS */
cs_num = (dst / (1 + SDRAM_CS_SIZE));
reg_write(XOR_ADDR_OVRD_REG(0, 0),
((cs_num << 25) | (1 << 24)));
channel.desc->src_addr0 = (src);
channel.desc->dst_addr = (dst % (1 + SDRAM_CS_SIZE));
channel.desc->src_addr0 = src;
channel.desc->dst_addr = (dst % (1 + SDRAM_CS_SIZE));
}
channel.desc->src_addr1 = 0;
channel.desc->byte_cnt = byte_count;
channel.desc->next_desc_ptr = 0;
channel.desc->status = 1 << 31;
channel.desc->desc_cmd = 0x0;
channel.desc_phys_addr = (unsigned long)&dma_desc;
ddr3_flush_l1_line((u32)&dma_desc);
/* Issue the transfer */
if (mv_xor_transfer(chan, MV_DMA, channel.desc_phys_addr) != MV_OK)
return MV_FAIL;
/* Wait for completion */
xor_waiton_eng(chan);
if (dst > SRAM_BASE) {
for (byte = 0; byte < byte_count; byte += 0x20)
cache_inv(dst + byte);
}
return MV_OK;
}
/*
* Name: ddr3_flush_l1_line
* Desc:
* Args:
* Notes:
* Returns: MV_OK if success, other error code if fail.
*/
static void ddr3_flush_l1_line(u32 line)
{
u32 reg;
#if defined(MV88F672X)
reg = 1;
#else
reg = reg_read(REG_SAMPLE_RESET_LOW_ADDR) &
(1 << REG_SAMPLE_RESET_CPU_ARCH_OFFS);
#ifdef MV88F67XX
reg = ~reg & (1 << REG_SAMPLE_RESET_CPU_ARCH_OFFS);
#endif
#endif
if (reg) {
/* V7 Arch mode */
flush_l1_v7(line);
flush_l1_v7(line + CACHE_LINE_SIZE);
} else {
/* V6 Arch mode */
flush_l1_v6(line);
flush_l1_v6(line + CACHE_LINE_SIZE);
}
}
int ddr3_dram_sram_read(u32 src, u32 dst, u32 len)
{
u32 ui;
u32 *dst_ptr, *src_ptr;
dst_ptr = (u32 *)dst;
src_ptr = (u32 *)src;
for (ui = 0; ui < len; ui++) {
*dst_ptr = *src_ptr;
dst_ptr++;
src_ptr++;
}
return MV_OK;
}
int ddr3_sdram_dqs_compare(MV_DRAM_INFO *dram_info, u32 unlock_pup,
u32 *new_locked_pup, u32 *pattern,
u32 pattern_len, u32 sdram_offset, int write,
int mask, u32 *mask_pattern,
int special_compare)
{
u32 uj, pup_groups;
if (dram_info->num_of_std_pups == PUP_NUM_64BIT)
pup_groups = 2;
else
pup_groups = 1;
ddr3_reset_phy_read_fifo();
/* Check if need to write to sdram before read */
if (write == 1)
ddr3_dram_sram_burst((u32)pattern, sdram_offset, pattern_len);
ddr3_dram_sram_burst(sdram_offset, (u32)sdram_data, pattern_len);
/* Compare read result to write */
for (uj = 0; uj < pattern_len; uj++) {
if (special_compare && special_compare_pattern(uj))
continue;
if (dram_info->ddr_width > 16) {
compare_pattern_v1(uj, new_locked_pup, pattern,
pup_groups, 1);
} else {
compare_pattern_v2(uj, new_locked_pup, pattern);
}
}
return MV_OK;
}
void ddr3_reset_phy_read_fifo(void)
{
u32 reg;
/* reset read FIFO */
reg = reg_read(REG_DRAM_TRAINING_ADDR);
/* Start Auto Read Leveling procedure */
reg |= (1 << REG_DRAM_TRAINING_RL_OFFS);
/* 0x15B0 - Training Register */
reg_write(REG_DRAM_TRAINING_ADDR, reg);
reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
reg |= ((1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS) +
(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS));
/* [0] = 1 - Enable SW override, [4] = 1 - FIFO reset */
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
do {
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) &
(1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS);
} while (reg); /* Wait for '0' */
reg = reg_read(REG_DRAM_TRAINING_ADDR);
/* Clear Auto Read Leveling procedure */
reg &= ~(1 << REG_DRAM_TRAINING_RL_OFFS);
/* 0x15B0 - Training Register */
reg_write(REG_DRAM_TRAINING_ADDR, reg);
}