upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
216 lines
5.6 KiB
216 lines
5.6 KiB
/*
|
|
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* Michael Barkowski <michael.barkowski@freescale.com>
|
|
* Based on mpc832xmds file by Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <command.h>
|
|
#include <libfdt.h>
|
|
#if defined(CONFIG_PCI)
|
|
#include <pci.h>
|
|
#endif
|
|
#include <asm/mmu.h>
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* UCC3 */
|
|
{1, 0, 1, 0, 1}, /* TxD0 */
|
|
{1, 1, 1, 0, 1}, /* TxD1 */
|
|
{1, 2, 1, 0, 1}, /* TxD2 */
|
|
{1, 3, 1, 0, 1}, /* TxD3 */
|
|
{1, 9, 1, 0, 1}, /* TxER */
|
|
{1, 12, 1, 0, 1}, /* TxEN */
|
|
{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
|
|
|
|
{1, 4, 2, 0, 1}, /* RxD0 */
|
|
{1, 5, 2, 0, 1}, /* RxD1 */
|
|
{1, 6, 2, 0, 1}, /* RxD2 */
|
|
{1, 7, 2, 0, 1}, /* RxD3 */
|
|
{1, 8, 2, 0, 1}, /* RxER */
|
|
{1, 10, 2, 0, 1}, /* RxDV */
|
|
{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
|
|
{1, 11, 2, 0, 1}, /* COL */
|
|
{1, 13, 2, 0, 1}, /* CRS */
|
|
|
|
/* UCC2 */
|
|
{0, 18, 1, 0, 1}, /* TxD0 */
|
|
{0, 19, 1, 0, 1}, /* TxD1 */
|
|
{0, 20, 1, 0, 1}, /* TxD2 */
|
|
{0, 21, 1, 0, 1}, /* TxD3 */
|
|
{0, 27, 1, 0, 1}, /* TxER */
|
|
{0, 30, 1, 0, 1}, /* TxEN */
|
|
{3, 23, 2, 0, 1}, /* TxCLK->CLK3 */
|
|
|
|
{0, 22, 2, 0, 1}, /* RxD0 */
|
|
{0, 23, 2, 0, 1}, /* RxD1 */
|
|
{0, 24, 2, 0, 1}, /* RxD2 */
|
|
{0, 25, 2, 0, 1}, /* RxD3 */
|
|
{0, 26, 1, 0, 1}, /* RxER */
|
|
{0, 28, 2, 0, 1}, /* Rx_DV */
|
|
{3, 21, 2, 0, 1}, /* RxCLK->CLK16 */
|
|
{0, 29, 2, 0, 1}, /* COL */
|
|
{0, 31, 2, 0, 1}, /* CRS */
|
|
|
|
{3, 4, 3, 0, 2}, /* MDIO */
|
|
{3, 5, 1, 0, 2}, /* MDC */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
|
};
|
|
|
|
int fixed_sdram(void);
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
|
return -1;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
|
|
|
msize = fixed_sdram();
|
|
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
return (msize * 1024 * 1024);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
u32 ddr_size;
|
|
u32 ddr_size_log2;
|
|
|
|
msize = CONFIG_SYS_DDR_SIZE;
|
|
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
|
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
|
|
if (ddr_size & 1) {
|
|
return -1;
|
|
}
|
|
}
|
|
im->sysconf.ddrlaw[0].ar =
|
|
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
|
|
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
__asm__ __volatile__ ("sync");
|
|
udelay(200);
|
|
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
__asm__ __volatile__ ("sync");
|
|
return msize;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Freescale MPC8323ERDB\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_region pci_regions[] = {
|
|
{
|
|
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
|
|
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
|
|
size: CONFIG_SYS_PCI1_MEM_SIZE,
|
|
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
|
|
},
|
|
{
|
|
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
|
|
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
|
|
size: CONFIG_SYS_PCI1_MMIO_SIZE,
|
|
flags: PCI_REGION_MEM
|
|
},
|
|
{
|
|
bus_start: CONFIG_SYS_PCI1_IO_BASE,
|
|
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
|
|
size: CONFIG_SYS_PCI1_IO_SIZE,
|
|
flags: PCI_REGION_IO
|
|
}
|
|
};
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
|
|
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
|
|
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
|
|
struct pci_region *reg[] = { pci_regions };
|
|
|
|
/* Enable all 3 PCI_CLK_OUTPUTs. */
|
|
clk->occr |= 0xe0000000;
|
|
|
|
/* Configure PCI Local Access Windows */
|
|
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
|
|
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
|
|
|
|
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
|
|
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
|
|
|
|
mpc83xx_pci_init(1, reg);
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_I2C_MAC_OFFSET)
|
|
int mac_read_from_eeprom(void)
|
|
{
|
|
uchar buf[28];
|
|
char str[18];
|
|
int i = 0;
|
|
unsigned int crc = 0;
|
|
unsigned char enetvar[32];
|
|
|
|
/* Read MAC addresses from EEPROM */
|
|
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) {
|
|
printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
} else {
|
|
if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
|
|
printf("Reading MAC from EEPROM\n");
|
|
for (i = 0; i < 4; i++) {
|
|
if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) {
|
|
sprintf(str,
|
|
"%02X:%02X:%02X:%02X:%02X:%02X",
|
|
buf[i * 6], buf[i * 6 + 1],
|
|
buf[i * 6 + 2], buf[i * 6 + 3],
|
|
buf[i * 6 + 4], buf[i * 6 + 5]);
|
|
sprintf((char *)enetvar,
|
|
i ? "eth%daddr" : "ethaddr", i);
|
|
setenv((char *)enetvar, str);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_I2C_MAC_OFFSET */
|
|
|