upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/davinci/sffsdr/sffsdr.c

147 lines
4.3 KiB

/*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
* Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
*
* Parts are shamelessly stolen from various TI sources, original copyright
* follows:
*
* Copyright (C) 2004 Texas Instruments.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/davinci_misc.h>
#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */
#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */
#define INTEGRITY_SYSCFG_OFFSET 0x7E8
#define INTEGRITY_CHECKWORD_OFFSET 0x7F8
#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_SFFSDR;
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
davinci_errata_workarounds();
/* Power on required peripherals */
lpsc_on(DAVINCI_LPSC_GPIO);
#if !defined(CONFIG_SYS_USE_DSPLINK)
/* Powerup the DSP */
dsp_on();
#endif /* CONFIG_SYS_USE_DSPLINK */
davinci_enable_uart0();
davinci_enable_emac();
davinci_enable_i2c();
lpsc_on(DAVINCI_LPSC_TIMER1);
timer_init();
return(0);
}
/* Read ethernet MAC address from Integrity data structure inside EEPROM.
* Returns 1 if found, 0 otherwise.
*/
static int sffsdr_read_mac_address(uint8_t *buf)
{
u_int32_t value, mac[2], address;
/* Read Integrity data structure checkword. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
if (value != INTEGRITY_CHECKWORD_VALUE)
return 0;
/* Read SYSCFG structure offset. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
address = 0x800 + (int) value; /* Address of SYSCFG structure. */
/* Read NET CONFIG structure offset. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
address += 12; /* Address of NET INTERFACE CONFIG structure. */
/* Read NET INTERFACE CONFIG 2 structure offset. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE
* CONFIG 2 structure. */
/* Read MAC address. */
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
goto err;
buf[0] = mac[0] >> 24;
buf[1] = mac[0] >> 16;
buf[2] = mac[0] >> 8;
buf[3] = mac[0];
buf[4] = mac[1] >> 24;
buf[5] = mac[1] >> 16;
return 1; /* Found */
err:
printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
return 0;
}
/* Platform dependent initialisation. */
int misc_init_r(void)
{
uint8_t i2cbuf;
uint8_t eeprom_enetaddr[6];
/* EMIF-A CS3 configuration for FPGA. */
REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
/* Configure I2C switch (PCA9543) to enable channel 0. */
i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR);
return 1;
}
/* Read Ethernet MAC address from EEPROM if available. */
if (sffsdr_read_mac_address(eeprom_enetaddr))
davinci_sync_env_enetaddr(eeprom_enetaddr);
return(0);
}