upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
587 lines
18 KiB
587 lines
18 KiB
/*
|
|
* This file holds USB constants and structures that are needed for
|
|
* USB device APIs. These are used by the USB device model, which is
|
|
* defined in chapter 9 of the USB 2.0 specification and in the
|
|
* Wireless USB 1.0 (spread around). Linux has several APIs in C that
|
|
* need these:
|
|
*
|
|
* - the master/host side Linux-USB kernel driver API;
|
|
* - the "usbfs" user space API; and
|
|
* - the Linux "gadget" slave/device/peripheral side driver API.
|
|
*
|
|
* USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
|
|
* act either as a USB master/host or as a USB slave/device. That means
|
|
* the master and slave side APIs benefit from working well together.
|
|
*
|
|
* There's also "Wireless USB", using low power short range radios for
|
|
* peripheral interconnection but otherwise building on the USB framework.
|
|
*
|
|
* Note all descriptors are declared '__attribute__((packed))' so that:
|
|
*
|
|
* [a] they never get padded, either internally (USB spec writers
|
|
* probably handled that) or externally;
|
|
*
|
|
* [b] so that accessing bigger-than-a-bytes fields will never
|
|
* generate bus errors on any platform, even when the location of
|
|
* its descriptor inside a bundle isn't "naturally aligned", and
|
|
*
|
|
* [c] for consistency, removing all doubt even when it appears to
|
|
* someone that the two other points are non-issues for that
|
|
* particular descriptor type.
|
|
*
|
|
* Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and
|
|
* Remy Bohmer <linux@bohmer.net>
|
|
*/
|
|
|
|
#ifndef __LINUX_USB_CH9_H
|
|
#define __LINUX_USB_CH9_H
|
|
|
|
#include <linux/types.h> /* __u8 etc */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* CONTROL REQUEST SUPPORT */
|
|
|
|
/*
|
|
* USB directions
|
|
*
|
|
* This bit flag is used in endpoint descriptors' bEndpointAddress field.
|
|
* It's also one of three fields in control requests bRequestType.
|
|
*/
|
|
#define USB_DIR_OUT 0 /* to device */
|
|
#define USB_DIR_IN 0x80 /* to host */
|
|
|
|
/*
|
|
* USB types, the second of three bRequestType fields
|
|
*/
|
|
#define USB_TYPE_MASK (0x03 << 5)
|
|
#define USB_TYPE_STANDARD (0x00 << 5)
|
|
#define USB_TYPE_CLASS (0x01 << 5)
|
|
#define USB_TYPE_VENDOR (0x02 << 5)
|
|
#define USB_TYPE_RESERVED (0x03 << 5)
|
|
|
|
/*
|
|
* USB recipients, the third of three bRequestType fields
|
|
*/
|
|
#define USB_RECIP_MASK 0x1f
|
|
#define USB_RECIP_DEVICE 0x00
|
|
#define USB_RECIP_INTERFACE 0x01
|
|
#define USB_RECIP_ENDPOINT 0x02
|
|
#define USB_RECIP_OTHER 0x03
|
|
/* From Wireless USB 1.0 */
|
|
#define USB_RECIP_PORT 0x04
|
|
#define USB_RECIP_RPIPE 0x05
|
|
|
|
/*
|
|
* Standard requests, for the bRequest field of a SETUP packet.
|
|
*
|
|
* These are qualified by the bRequestType field, so that for example
|
|
* TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
|
|
* by a GET_STATUS request.
|
|
*/
|
|
#define USB_REQ_GET_STATUS 0x00
|
|
#define USB_REQ_CLEAR_FEATURE 0x01
|
|
#define USB_REQ_SET_FEATURE 0x03
|
|
#define USB_REQ_SET_ADDRESS 0x05
|
|
#define USB_REQ_GET_DESCRIPTOR 0x06
|
|
#define USB_REQ_SET_DESCRIPTOR 0x07
|
|
#define USB_REQ_GET_CONFIGURATION 0x08
|
|
#define USB_REQ_SET_CONFIGURATION 0x09
|
|
#define USB_REQ_GET_INTERFACE 0x0A
|
|
#define USB_REQ_SET_INTERFACE 0x0B
|
|
#define USB_REQ_SYNCH_FRAME 0x0C
|
|
|
|
#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
|
|
#define USB_REQ_GET_ENCRYPTION 0x0E
|
|
#define USB_REQ_RPIPE_ABORT 0x0E
|
|
#define USB_REQ_SET_HANDSHAKE 0x0F
|
|
#define USB_REQ_RPIPE_RESET 0x0F
|
|
#define USB_REQ_GET_HANDSHAKE 0x10
|
|
#define USB_REQ_SET_CONNECTION 0x11
|
|
#define USB_REQ_SET_SECURITY_DATA 0x12
|
|
#define USB_REQ_GET_SECURITY_DATA 0x13
|
|
#define USB_REQ_SET_WUSB_DATA 0x14
|
|
#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
|
|
#define USB_REQ_LOOPBACK_DATA_READ 0x16
|
|
#define USB_REQ_SET_INTERFACE_DS 0x17
|
|
|
|
/*
|
|
* USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
|
|
* are read as a bit array returned by USB_REQ_GET_STATUS. (So there
|
|
* are at most sixteen features of each type.)
|
|
*/
|
|
#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
|
|
#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
|
|
#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
|
|
#define USB_DEVICE_BATTERY 2 /* (wireless) */
|
|
#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
|
|
#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
|
|
#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
|
|
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
|
|
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
|
|
|
|
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
|
|
|
|
|
|
/**
|
|
* struct usb_ctrlrequest - SETUP data for a USB device control request
|
|
* @bRequestType: matches the USB bmRequestType field
|
|
* @bRequest: matches the USB bRequest field
|
|
* @wValue: matches the USB wValue field (le16 byte order)
|
|
* @wIndex: matches the USB wIndex field (le16 byte order)
|
|
* @wLength: matches the USB wLength field (le16 byte order)
|
|
*
|
|
* This structure is used to send control requests to a USB device. It matches
|
|
* the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
|
|
* USB spec for a fuller description of the different fields, and what they are
|
|
* used for.
|
|
*
|
|
* Note that the driver for any interface can issue control requests.
|
|
* For most devices, interfaces don't coordinate with each other, so
|
|
* such requests may be made at any time.
|
|
*/
|
|
#if defined(__BIG_ENDIAN) || defined(__ARMEB__)
|
|
#error (functionality not verified for big endian targets, todo...)
|
|
#endif
|
|
|
|
struct usb_ctrlrequest {
|
|
__u8 bRequestType;
|
|
__u8 bRequest;
|
|
__le16 wValue;
|
|
__le16 wIndex;
|
|
__le16 wLength;
|
|
} __attribute__ ((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
|
|
* (rarely) accepted by SET_DESCRIPTOR.
|
|
*
|
|
* Note that all multi-byte values here are encoded in little endian
|
|
* byte order "on the wire". But when exposed through Linux-USB APIs,
|
|
* they've been converted to cpu byte order.
|
|
*/
|
|
|
|
/*
|
|
* Descriptor types ... USB 2.0 spec table 9.5
|
|
*/
|
|
#define USB_DT_DEVICE 0x01
|
|
#define USB_DT_CONFIG 0x02
|
|
#define USB_DT_STRING 0x03
|
|
#define USB_DT_INTERFACE 0x04
|
|
#define USB_DT_ENDPOINT 0x05
|
|
#define USB_DT_DEVICE_QUALIFIER 0x06
|
|
#define USB_DT_OTHER_SPEED_CONFIG 0x07
|
|
#define USB_DT_INTERFACE_POWER 0x08
|
|
/* these are from a minor usb 2.0 revision (ECN) */
|
|
#define USB_DT_OTG 0x09
|
|
#define USB_DT_DEBUG 0x0a
|
|
#define USB_DT_INTERFACE_ASSOCIATION 0x0b
|
|
/* these are from the Wireless USB spec */
|
|
#define USB_DT_SECURITY 0x0c
|
|
#define USB_DT_KEY 0x0d
|
|
#define USB_DT_ENCRYPTION_TYPE 0x0e
|
|
#define USB_DT_BOS 0x0f
|
|
#define USB_DT_DEVICE_CAPABILITY 0x10
|
|
#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
|
|
#define USB_DT_WIRE_ADAPTER 0x21
|
|
#define USB_DT_RPIPE 0x22
|
|
|
|
/* Conventional codes for class-specific descriptors. The convention is
|
|
* defined in the USB "Common Class" Spec (3.11). Individual class specs
|
|
* are authoritative for their usage, not the "common class" writeup.
|
|
*/
|
|
#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
|
|
#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
|
|
#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
|
|
#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
|
|
#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
|
|
|
|
/* All standard descriptors have these 2 fields at the beginning */
|
|
struct usb_descriptor_header {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEVICE: Device descriptor */
|
|
struct usb_device_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__le16 bcdUSB;
|
|
__u8 bDeviceClass;
|
|
__u8 bDeviceSubClass;
|
|
__u8 bDeviceProtocol;
|
|
__u8 bMaxPacketSize0;
|
|
__le16 idVendor;
|
|
__le16 idProduct;
|
|
__le16 bcdDevice;
|
|
__u8 iManufacturer;
|
|
__u8 iProduct;
|
|
__u8 iSerialNumber;
|
|
__u8 bNumConfigurations;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_DEVICE_SIZE 18
|
|
|
|
|
|
/*
|
|
* Device and/or Interface Class codes
|
|
* as found in bDeviceClass or bInterfaceClass
|
|
* and defined by www.usb.org documents
|
|
*/
|
|
#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
|
|
#define USB_CLASS_AUDIO 1
|
|
#define USB_CLASS_COMM 2
|
|
#define USB_CLASS_HID 3
|
|
#define USB_CLASS_PHYSICAL 5
|
|
#define USB_CLASS_STILL_IMAGE 6
|
|
#define USB_CLASS_PRINTER 7
|
|
#define USB_CLASS_MASS_STORAGE 8
|
|
#define USB_CLASS_HUB 9
|
|
#define USB_CLASS_CDC_DATA 0x0a
|
|
#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
|
|
#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
|
|
#define USB_CLASS_VIDEO 0x0e
|
|
#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
|
|
#define USB_CLASS_MISC 0xef
|
|
#define USB_CLASS_APP_SPEC 0xfe
|
|
#define USB_CLASS_VENDOR_SPEC 0xff
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_CONFIG: Configuration descriptor information.
|
|
*
|
|
* USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
|
|
* descriptor type is different. Highspeed-capable devices can look
|
|
* different depending on what speed they're currently running. Only
|
|
* devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
|
|
* descriptors.
|
|
*/
|
|
struct usb_config_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__le16 wTotalLength;
|
|
__u8 bNumInterfaces;
|
|
__u8 bConfigurationValue;
|
|
__u8 iConfiguration;
|
|
__u8 bmAttributes;
|
|
__u8 bMaxPower;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_CONFIG_SIZE 9
|
|
|
|
/* from config descriptor bmAttributes */
|
|
#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
|
|
#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
|
|
#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
|
|
#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_STRING: String descriptor */
|
|
struct usb_string_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__le16 wData[1]; /* UTF-16LE encoded */
|
|
} __attribute__ ((packed));
|
|
|
|
/* note that "string" zero is special, it holds language codes that
|
|
* the device supports, not Unicode characters.
|
|
*/
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_INTERFACE: Interface descriptor */
|
|
struct usb_interface_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 bInterfaceNumber;
|
|
__u8 bAlternateSetting;
|
|
__u8 bNumEndpoints;
|
|
__u8 bInterfaceClass;
|
|
__u8 bInterfaceSubClass;
|
|
__u8 bInterfaceProtocol;
|
|
__u8 iInterface;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_INTERFACE_SIZE 9
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_ENDPOINT: Endpoint descriptor */
|
|
struct usb_endpoint_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 bEndpointAddress;
|
|
__u8 bmAttributes;
|
|
__le16 wMaxPacketSize;
|
|
__u8 bInterval;
|
|
|
|
/* NOTE: these two are _only_ in audio endpoints. */
|
|
/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
|
|
__u8 bRefresh;
|
|
__u8 bSynchAddress;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_ENDPOINT_SIZE 7
|
|
#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
|
|
|
|
|
|
/*
|
|
* Endpoints
|
|
*/
|
|
#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
|
|
#define USB_ENDPOINT_DIR_MASK 0x80
|
|
|
|
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
|
|
#define USB_ENDPOINT_XFER_CONTROL 0
|
|
#define USB_ENDPOINT_XFER_ISOC 1
|
|
#define USB_ENDPOINT_XFER_BULK 2
|
|
#define USB_ENDPOINT_XFER_INT 3
|
|
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
|
|
struct usb_qualifier_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__le16 bcdUSB;
|
|
__u8 bDeviceClass;
|
|
__u8 bDeviceSubClass;
|
|
__u8 bDeviceProtocol;
|
|
__u8 bMaxPacketSize0;
|
|
__u8 bNumConfigurations;
|
|
__u8 bRESERVED;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_OTG (from OTG 1.0a supplement) */
|
|
struct usb_otg_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 bmAttributes; /* support for HNP, SRP, etc */
|
|
} __attribute__ ((packed));
|
|
|
|
/* from usb_otg_descriptor.bmAttributes */
|
|
#define USB_OTG_SRP (1 << 0)
|
|
#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
|
|
struct usb_debug_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
/* bulk endpoints with 8 byte maxpacket */
|
|
__u8 bDebugInEndpoint;
|
|
__u8 bDebugOutEndpoint;
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
|
|
struct usb_interface_assoc_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 bFirstInterface;
|
|
__u8 bInterfaceCount;
|
|
__u8 bFunctionClass;
|
|
__u8 bFunctionSubClass;
|
|
__u8 bFunctionProtocol;
|
|
__u8 iFunction;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_SECURITY: group of wireless security descriptors, including
|
|
* encryption types available for setting up a CC/association.
|
|
*/
|
|
struct usb_security_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__le16 wTotalLength;
|
|
__u8 bNumEncryptionTypes;
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
|
|
* may be retrieved.
|
|
*/
|
|
struct usb_key_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 tTKID[3];
|
|
__u8 bReserved;
|
|
__u8 bKeyData[0];
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
|
|
struct usb_encryption_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 bEncryptionType;
|
|
#define USB_ENC_TYPE_UNSECURE 0
|
|
#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
|
|
#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
|
|
#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
|
|
__u8 bEncryptionValue; /* use in SET_ENCRYPTION */
|
|
__u8 bAuthKeyIndex;
|
|
} __attribute__((packed));
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_BOS: group of wireless capabilities */
|
|
struct usb_bos_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__le16 wTotalLength;
|
|
__u8 bNumDeviceCaps;
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
|
|
struct usb_dev_cap_header {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
__u8 bDevCapabilityType;
|
|
} __attribute__((packed));
|
|
|
|
#define USB_CAP_TYPE_WIRELESS_USB 1
|
|
|
|
struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
__u8 bDevCapabilityType;
|
|
|
|
__u8 bmAttributes;
|
|
#define USB_WIRELESS_P2P_DRD (1 << 1)
|
|
#define USB_WIRELESS_BEACON_MASK (3 << 2)
|
|
#define USB_WIRELESS_BEACON_SELF (1 << 2)
|
|
#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
|
|
#define USB_WIRELESS_BEACON_NONE (3 << 2)
|
|
__le16 wPHYRates; /* bit rates, Mbps */
|
|
#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
|
|
#define USB_WIRELESS_PHY_80 (1 << 1)
|
|
#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
|
|
#define USB_WIRELESS_PHY_160 (1 << 3)
|
|
#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
|
|
#define USB_WIRELESS_PHY_320 (1 << 5)
|
|
#define USB_WIRELESS_PHY_400 (1 << 6)
|
|
#define USB_WIRELESS_PHY_480 (1 << 7)
|
|
__u8 bmTFITXPowerInfo; /* TFI power levels */
|
|
__u8 bmFFITXPowerInfo; /* FFI power levels */
|
|
__le16 bmBandGroup;
|
|
__u8 bReserved;
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
|
|
* each endpoint descriptor for a wireless device
|
|
*/
|
|
struct usb_wireless_ep_comp_descriptor {
|
|
__u8 bLength;
|
|
__u8 bDescriptorType;
|
|
|
|
__u8 bMaxBurst;
|
|
__u8 bMaxSequence;
|
|
__le16 wMaxStreamDelay;
|
|
__le16 wOverTheAirPacketSize;
|
|
__u8 bOverTheAirInterval;
|
|
__u8 bmCompAttributes;
|
|
#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
|
|
#define USB_ENDPOINT_SWITCH_NO 0
|
|
#define USB_ENDPOINT_SWITCH_SWITCH 1
|
|
#define USB_ENDPOINT_SWITCH_SCALE 2
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
|
|
* host and a device for connection set up, mutual authentication, and
|
|
* exchanging short lived session keys. The handshake depends on a CC.
|
|
*/
|
|
struct usb_handshake {
|
|
__u8 bMessageNumber;
|
|
__u8 bStatus;
|
|
__u8 tTKID[3];
|
|
__u8 bReserved;
|
|
__u8 CDID[16];
|
|
__u8 nonce[16];
|
|
__u8 MIC[8];
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
|
|
* A CC may also be set up using non-wireless secure channels (including
|
|
* wired USB!), and some devices may support CCs with multiple hosts.
|
|
*/
|
|
struct usb_connection_context {
|
|
__u8 CHID[16]; /* persistent host id */
|
|
__u8 CDID[16]; /* device id (unique w/in host context) */
|
|
__u8 CK[16]; /* connection key */
|
|
} __attribute__((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB 2.0 defines three speeds, here's how Linux identifies them */
|
|
|
|
enum usb_device_speed {
|
|
USB_SPEED_UNKNOWN = 0, /* enumerating */
|
|
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
|
|
USB_SPEED_HIGH, /* usb 2.0 */
|
|
USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
|
|
};
|
|
|
|
enum usb_device_state {
|
|
/* NOTATTACHED isn't in the USB spec, and this state acts
|
|
* the same as ATTACHED ... but it's clearer this way.
|
|
*/
|
|
USB_STATE_NOTATTACHED = 0,
|
|
|
|
/* chapter 9 and authentication (wireless) device states */
|
|
USB_STATE_ATTACHED,
|
|
USB_STATE_POWERED, /* wired */
|
|
USB_STATE_UNAUTHENTICATED, /* auth */
|
|
USB_STATE_RECONNECTING, /* auth */
|
|
USB_STATE_DEFAULT, /* limited function */
|
|
USB_STATE_ADDRESS,
|
|
USB_STATE_CONFIGURED, /* most functions */
|
|
|
|
USB_STATE_SUSPENDED
|
|
|
|
/* NOTE: there are actually four different SUSPENDED
|
|
* states, returning to POWERED, DEFAULT, ADDRESS, or
|
|
* CONFIGURED respectively when SOF tokens flow again.
|
|
*/
|
|
};
|
|
|
|
#endif /* __LINUX_USB_CH9_H */
|
|
|