upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/cpu/armv7/socfpga/lowlevel_init.S

77 lines
2.1 KiB

/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <version.h>
/* Save the parameter pass in by previous boot loader */
.global save_boot_params
save_boot_params:
/* save the parameter here */
/*
* Setup stack for exception, which is located
* at the end of on-chip RAM. We don't expect exception prior to
* relocation and if that happens, we won't worry -- it will overide
* global data region as the code will goto reset. After relocation,
* this region won't be used by other part of program.
* Hence it is safe.
*/
ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
ldr r1, =IRQ_STACK_START_IN
str r0, [r1]
bx lr
/* Set up the platform, once the cpu has been initialized */
.globl lowlevel_init
lowlevel_init:
/* Remap */
#ifdef CONFIG_SPL_BUILD
/*
* SPL : configure the remap (L3 NIC-301 GPV)
* so the on-chip RAM at lower memory instead ROM.
*/
ldr r0, =SOCFPGA_L3REGS_ADDRESS
mov r1, #0x19
str r1, [r0]
#else
/*
* U-Boot : configure the remap (L3 NIC-301 GPV)
* so the SDRAM at lower memory instead on-chip RAM.
*/
ldr r0, =SOCFPGA_L3REGS_ADDRESS
mov r1, #0x2
str r1, [r0]
/* Private components security */
/*
* U-Boot : configure private timer, global timer and cpu
* component access as non secure for kernel stage (as required
* by kernel)
*/
mrc p15,4,r0,c15,c0,0
add r1, r0, #0x54
ldr r2, [r1]
orr r2, r2, #0xff
orr r2, r2, #0xf00
str r2, [r1]
#endif /* #ifdef CONFIG_SPL_BUILD */
mov pc, lr