upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/walnut405/walnut405.c

138 lines
4.2 KiB

/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
long int spd_sdram (void);
#include <common.h>
#include "walnut405.h"
#include <asm/processor.h>
int board_pre_init (void)
{
/*-------------------------------------------------------------------------+
| Interrupt controller setup for the Walnut board.
| Note: IRQ 0-15 405GP internally generated; active high; level sensitive
| IRQ 16 405GP internally generated; active low; level sensitive
| IRQ 17-24 RESERVED
| IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
| IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
| IRQ 27 (EXT IRQ 2) Not Used
| IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
| IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
| IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
| IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
| Note for Walnut board:
| An interrupt taken for the FPGA (IRQ 25) indicates that either
| the Mouse, Keyboard, IRDA, or External Expansion caused the
| interrupt. The FPGA must be read to determine which device
| caused the interrupt. The default setting of the FPGA clears
|
+-------------------------------------------------------------------------*/
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr (uicer, 0x00000000); /* disable all ints */
mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
mtdcr (uicpr, 0xFFFFFFE0); /* set int polarities */
mtdcr (uictr, 0x10000000); /* set int trigger levels */
mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
mtebc (pb1ap, 0x02815480);
mtebc (pb1cr, 0xF0018000);
/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
mtebc (pb2ap, 0x04815A80);
mtebc (pb2cr, 0xF0118000);
/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
mtebc (pb3ap, 0x01815280);
mtebc (pb3cr, 0xF0218000);
/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
mtebc (pb7ap, 0x01815280);
mtebc (pb7cr, 0xF0318000);
/* set UART1 control to select CTS/RTS */
#define FPGA_BRDC 0xF0300004
*(volatile char *) (FPGA_BRDC) |= 0x1;
return 0;
}
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
unsigned char *s = getenv ("serial#");
unsigned char *e;
puts ("Board: ");
if (!s || strncmp (s, "WALNUT405", 9)) {
puts ("### No HW ID - assuming WALNUT405");
} else {
for (e = s; *e; ++e) {
if (*e == ' ')
break;
}
for (; s < e; ++s) {
putc (*s);
}
}
putc ('\n');
return (0);
}
/* -------------------------------------------------------------------------
initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
the necessary info for SDRAM controller configuration
------------------------------------------------------------------------- */
long int initdram (int board_type)
{
long int ret;
ret = spd_sdram ();
return ret;
}
/* ------------------------------------------------------------------------- */
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: xxx MB - ok\n");
return (0);
}
/* ------------------------------------------------------------------------- */