upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
514 lines
14 KiB
514 lines
14 KiB
/*
|
|
* COM1 NS16550 support
|
|
* originally from linux source (arch/powerpc/boot/ns16550.c)
|
|
* modified to use CONFIG_SYS_ISA_MEM and new defines
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <ns16550.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <linux/types.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
|
|
#define UART_MCRVAL (UART_MCR_DTR | \
|
|
UART_MCR_RTS) /* RTS/DTR */
|
|
|
|
#ifndef CONFIG_DM_SERIAL
|
|
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
|
|
#define serial_out(x, y) outb(x, (ulong)y)
|
|
#define serial_in(y) inb((ulong)y)
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0)
|
|
#define serial_out(x, y) out_be32(y, x)
|
|
#define serial_in(y) in_be32(y)
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0)
|
|
#define serial_out(x, y) out_le32(y, x)
|
|
#define serial_in(y) in_le32(y)
|
|
#else
|
|
#define serial_out(x, y) writeb(x, y)
|
|
#define serial_in(y) readb(y)
|
|
#endif
|
|
#endif /* !CONFIG_DM_SERIAL */
|
|
|
|
#if defined(CONFIG_SOC_KEYSTONE)
|
|
#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0
|
|
#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
|
|
#undef UART_MCRVAL
|
|
#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL
|
|
#define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE)
|
|
#else
|
|
#define UART_MCRVAL (UART_MCR_RTS)
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_NS16550_IER
|
|
#define CONFIG_SYS_NS16550_IER 0x00
|
|
#endif /* CONFIG_SYS_NS16550_IER */
|
|
|
|
static inline void serial_out_shift(void *addr, int shift, int value)
|
|
{
|
|
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
|
|
outb(value, (ulong)addr);
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
|
|
out_le32(addr, value);
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
|
|
out_be32(addr, value);
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32)
|
|
writel(value, addr);
|
|
#elif defined(CONFIG_SYS_BIG_ENDIAN)
|
|
writeb(value, addr + (1 << shift) - 1);
|
|
#else
|
|
writeb(value, addr);
|
|
#endif
|
|
}
|
|
|
|
static inline int serial_in_shift(void *addr, int shift)
|
|
{
|
|
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
|
|
return inb((ulong)addr);
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN)
|
|
return in_le32(addr);
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
|
|
return in_be32(addr);
|
|
#elif defined(CONFIG_SYS_NS16550_MEM32)
|
|
return readl(addr);
|
|
#elif defined(CONFIG_SYS_BIG_ENDIAN)
|
|
return readb(addr + (1 << shift) - 1);
|
|
#else
|
|
return readb(addr);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_DM_SERIAL
|
|
|
|
#ifndef CONFIG_SYS_NS16550_CLK
|
|
#define CONFIG_SYS_NS16550_CLK 0
|
|
#endif
|
|
|
|
static void ns16550_writeb(NS16550_t port, int offset, int value)
|
|
{
|
|
struct ns16550_platdata *plat = port->plat;
|
|
unsigned char *addr;
|
|
|
|
offset *= 1 << plat->reg_shift;
|
|
addr = (unsigned char *)plat->base + offset;
|
|
|
|
/*
|
|
* As far as we know it doesn't make sense to support selection of
|
|
* these options at run-time, so use the existing CONFIG options.
|
|
*/
|
|
serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value);
|
|
}
|
|
|
|
static int ns16550_readb(NS16550_t port, int offset)
|
|
{
|
|
struct ns16550_platdata *plat = port->plat;
|
|
unsigned char *addr;
|
|
|
|
offset *= 1 << plat->reg_shift;
|
|
addr = (unsigned char *)plat->base + offset;
|
|
|
|
return serial_in_shift(addr + plat->reg_offset, plat->reg_shift);
|
|
}
|
|
|
|
static u32 ns16550_getfcr(NS16550_t port)
|
|
{
|
|
struct ns16550_platdata *plat = port->plat;
|
|
|
|
return plat->fcr;
|
|
}
|
|
|
|
/* We can clean these up once everything is moved to driver model */
|
|
#define serial_out(value, addr) \
|
|
ns16550_writeb(com_port, \
|
|
(unsigned char *)addr - (unsigned char *)com_port, value)
|
|
#define serial_in(addr) \
|
|
ns16550_readb(com_port, \
|
|
(unsigned char *)addr - (unsigned char *)com_port)
|
|
#else
|
|
static u32 ns16550_getfcr(NS16550_t port)
|
|
{
|
|
return UART_FCR_DEFVAL;
|
|
}
|
|
#endif
|
|
|
|
int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate)
|
|
{
|
|
const unsigned int mode_x_div = 16;
|
|
|
|
return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate);
|
|
}
|
|
|
|
static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
|
|
{
|
|
serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
|
|
serial_out(baud_divisor & 0xff, &com_port->dll);
|
|
serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
|
|
serial_out(UART_LCRVAL, &com_port->lcr);
|
|
}
|
|
|
|
void NS16550_init(NS16550_t com_port, int baud_divisor)
|
|
{
|
|
#if (defined(CONFIG_SPL_BUILD) && \
|
|
(defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
|
|
/*
|
|
* On some OMAP3/OMAP4 devices when UART3 is configured for boot mode
|
|
* before SPL starts only THRE bit is set. We have to empty the
|
|
* transmitter before initialization starts.
|
|
*/
|
|
if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
|
|
== UART_LSR_THRE) {
|
|
if (baud_divisor != -1)
|
|
NS16550_setbrg(com_port, baud_divisor);
|
|
serial_out(0, &com_port->mdr1);
|
|
}
|
|
#endif
|
|
|
|
while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT))
|
|
;
|
|
|
|
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
|
|
#if defined(CONFIG_ARCH_OMAP2PLUS)
|
|
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
|
|
#endif
|
|
serial_out(UART_MCRVAL, &com_port->mcr);
|
|
serial_out(ns16550_getfcr(com_port), &com_port->fcr);
|
|
if (baud_divisor != -1)
|
|
NS16550_setbrg(com_port, baud_divisor);
|
|
#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
|
|
/* /16 is proper to hit 115200 with 48MHz */
|
|
serial_out(0, &com_port->mdr1);
|
|
#endif
|
|
#if defined(CONFIG_SOC_KEYSTONE)
|
|
serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
|
|
#endif
|
|
}
|
|
|
|
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
|
|
void NS16550_reinit(NS16550_t com_port, int baud_divisor)
|
|
{
|
|
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
|
|
NS16550_setbrg(com_port, 0);
|
|
serial_out(UART_MCRVAL, &com_port->mcr);
|
|
serial_out(ns16550_getfcr(com_port), &com_port->fcr);
|
|
NS16550_setbrg(com_port, baud_divisor);
|
|
}
|
|
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
|
|
|
|
void NS16550_putc(NS16550_t com_port, char c)
|
|
{
|
|
while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0)
|
|
;
|
|
serial_out(c, &com_port->thr);
|
|
|
|
/*
|
|
* Call watchdog_reset() upon newline. This is done here in putc
|
|
* since the environment code uses a single puts() to print the complete
|
|
* environment upon "printenv". So we can't put this watchdog call
|
|
* in puts().
|
|
*/
|
|
if (c == '\n')
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
|
|
char NS16550_getc(NS16550_t com_port)
|
|
{
|
|
while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
|
|
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY)
|
|
extern void usbtty_poll(void);
|
|
usbtty_poll();
|
|
#endif
|
|
WATCHDOG_RESET();
|
|
}
|
|
return serial_in(&com_port->rbr);
|
|
}
|
|
|
|
int NS16550_tstc(NS16550_t com_port)
|
|
{
|
|
return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0;
|
|
}
|
|
|
|
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
|
|
|
|
#ifdef CONFIG_DEBUG_UART_NS16550
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
|
|
int baud_divisor;
|
|
|
|
/*
|
|
* We copy the code from above because it is already horribly messy.
|
|
* Trying to refactor to nicely remove the duplication doesn't seem
|
|
* feasible. The better fix is to move all users of this driver to
|
|
* driver model.
|
|
*/
|
|
baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
|
|
CONFIG_BAUDRATE);
|
|
serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
|
|
serial_dout(&com_port->mcr, UART_MCRVAL);
|
|
serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
|
|
|
|
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
|
|
serial_dout(&com_port->dll, baud_divisor & 0xff);
|
|
serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
|
|
serial_dout(&com_port->lcr, UART_LCRVAL);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
|
|
;
|
|
serial_dout(&com_port->thr, ch);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_UART_OMAP
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
|
|
int baud_divisor;
|
|
|
|
baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
|
|
CONFIG_BAUDRATE);
|
|
serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
|
|
serial_dout(&com_port->mdr1, 0x7);
|
|
serial_dout(&com_port->mcr, UART_MCRVAL);
|
|
serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
|
|
|
|
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
|
|
serial_dout(&com_port->dll, baud_divisor & 0xff);
|
|
serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
|
|
serial_dout(&com_port->lcr, UART_LCRVAL);
|
|
serial_dout(&com_port->mdr1, 0x0);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
|
|
;
|
|
serial_dout(&com_port->thr, ch);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_SERIAL
|
|
static int ns16550_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct NS16550 *const com_port = dev_get_priv(dev);
|
|
|
|
if (!(serial_in(&com_port->lsr) & UART_LSR_THRE))
|
|
return -EAGAIN;
|
|
serial_out(ch, &com_port->thr);
|
|
|
|
/*
|
|
* Call watchdog_reset() upon newline. This is done here in putc
|
|
* since the environment code uses a single puts() to print the complete
|
|
* environment upon "printenv". So we can't put this watchdog call
|
|
* in puts().
|
|
*/
|
|
if (ch == '\n')
|
|
WATCHDOG_RESET();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ns16550_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct NS16550 *const com_port = dev_get_priv(dev);
|
|
|
|
if (input)
|
|
return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0;
|
|
else
|
|
return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1;
|
|
}
|
|
|
|
static int ns16550_serial_getc(struct udevice *dev)
|
|
{
|
|
struct NS16550 *const com_port = dev_get_priv(dev);
|
|
|
|
if (!(serial_in(&com_port->lsr) & UART_LSR_DR))
|
|
return -EAGAIN;
|
|
|
|
return serial_in(&com_port->rbr);
|
|
}
|
|
|
|
static int ns16550_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct NS16550 *const com_port = dev_get_priv(dev);
|
|
struct ns16550_platdata *plat = com_port->plat;
|
|
int clock_divisor;
|
|
|
|
clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate);
|
|
|
|
NS16550_setbrg(com_port, clock_divisor);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ns16550_serial_probe(struct udevice *dev)
|
|
{
|
|
struct NS16550 *const com_port = dev_get_priv(dev);
|
|
|
|
com_port->plat = dev_get_platdata(dev);
|
|
NS16550_init(com_port, -1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
enum {
|
|
PORT_NS16550 = 0,
|
|
PORT_JZ4780,
|
|
};
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ns16550_platdata *plat = dev->platdata;
|
|
const u32 port_type = dev_get_driver_data(dev);
|
|
fdt_addr_t addr;
|
|
struct clk clk;
|
|
int err;
|
|
|
|
/* try Processor Local Bus device first */
|
|
addr = dev_read_addr(dev);
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI)
|
|
if (addr == FDT_ADDR_T_NONE) {
|
|
/* then try pci device */
|
|
struct fdt_pci_addr pci_addr;
|
|
u32 bar;
|
|
int ret;
|
|
|
|
/* we prefer to use a memory-mapped register */
|
|
ret = fdtdec_get_pci_addr(gd->fdt_blob, dev_of_offset(dev),
|
|
FDT_PCI_SPACE_MEM32, "reg",
|
|
&pci_addr);
|
|
if (ret) {
|
|
/* try if there is any i/o-mapped register */
|
|
ret = fdtdec_get_pci_addr(gd->fdt_blob,
|
|
dev_of_offset(dev),
|
|
FDT_PCI_SPACE_IO,
|
|
"reg", &pci_addr);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar);
|
|
if (ret)
|
|
return ret;
|
|
|
|
addr = bar;
|
|
}
|
|
#endif
|
|
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
|
|
plat->base = addr;
|
|
#else
|
|
plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
|
|
#endif
|
|
|
|
plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
|
|
plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
|
|
|
|
err = clk_get_by_index(dev, 0, &clk);
|
|
if (!err) {
|
|
err = clk_get_rate(&clk);
|
|
if (!IS_ERR_VALUE(err))
|
|
plat->clock = err;
|
|
} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
|
|
debug("ns16550 failed to get clock\n");
|
|
return err;
|
|
}
|
|
|
|
if (!plat->clock)
|
|
plat->clock = dev_read_u32_default(dev, "clock-frequency",
|
|
CONFIG_SYS_NS16550_CLK);
|
|
if (!plat->clock) {
|
|
debug("ns16550 clock not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
plat->fcr = UART_FCR_DEFVAL;
|
|
if (port_type == PORT_JZ4780)
|
|
plat->fcr |= UART_FCR_UME;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
const struct dm_serial_ops ns16550_serial_ops = {
|
|
.putc = ns16550_serial_putc,
|
|
.pending = ns16550_serial_pending,
|
|
.getc = ns16550_serial_getc,
|
|
.setbrg = ns16550_serial_setbrg,
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
/*
|
|
* Please consider existing compatible strings before adding a new
|
|
* one to keep this table compact. Or you may add a generic "ns16550"
|
|
* compatible string to your dts.
|
|
*/
|
|
static const struct udevice_id ns16550_serial_ids[] = {
|
|
{ .compatible = "ns16550", .data = PORT_NS16550 },
|
|
{ .compatible = "ns16550a", .data = PORT_NS16550 },
|
|
{ .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 },
|
|
{ .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "ti,omap2-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "ti,omap3-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "ti,omap4-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "ti,am3352-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "ti,am4372-uart", .data = PORT_NS16550 },
|
|
{ .compatible = "ti,dra742-uart", .data = PORT_NS16550 },
|
|
{}
|
|
};
|
|
#endif /* OF_CONTROL && !OF_PLATDATA */
|
|
|
|
#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
|
|
|
|
/* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */
|
|
#if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL)
|
|
U_BOOT_DRIVER(ns16550_serial) = {
|
|
.name = "ns16550_serial",
|
|
.id = UCLASS_SERIAL,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.of_match = ns16550_serial_ids,
|
|
.ofdata_to_platdata = ns16550_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
|
|
#endif
|
|
.priv_auto_alloc_size = sizeof(struct NS16550),
|
|
.probe = ns16550_serial_probe,
|
|
.ops = &ns16550_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
#endif
|
|
#endif /* SERIAL_PRESENT */
|
|
|
|
#endif /* CONFIG_DM_SERIAL */
|
|
|