upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
170 lines
4.2 KiB
170 lines
4.2 KiB
/*
|
|
* For clock initialization, see chapter 3 of the "MCIMX27 Multimedia
|
|
* Applications Processor Reference Manual, Rev. 0.2".
|
|
*
|
|
* (C) Copyright 2008 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
* (C) Copyright 2009 Ilya Yanok <yanok@emcraft.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/macro.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/asm-offsets.h>
|
|
|
|
SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE
|
|
SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE
|
|
SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0)
|
|
SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3)
|
|
SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \
|
|
ESDCTL_ROW13 | ESDCTL_COL10)
|
|
SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \
|
|
ESDCTL_ROW13 | ESDCTL_COL10)
|
|
SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \
|
|
ESDCTL_ROW13 | ESDCTL_COL10)
|
|
SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL
|
|
|
|
.macro init_aipi
|
|
/*
|
|
* setup AIPI1 and AIPI2
|
|
*/
|
|
write32 AIPI1_PSR0, AIPI1_PSR0_VAL
|
|
write32 AIPI1_PSR1, AIPI1_PSR1_VAL
|
|
write32 AIPI2_PSR0, AIPI2_PSR0_VAL
|
|
write32 AIPI2_PSR1, AIPI2_PSR1_VAL
|
|
|
|
.endm /* init_aipi */
|
|
|
|
.macro init_clock
|
|
ldr r0, =CSCR
|
|
/* disable MPLL/SPLL first */
|
|
ldr r1, [r0]
|
|
bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
|
|
str r1, [r0]
|
|
|
|
write32 MPCTL0, MPCTL0_VAL
|
|
write32 SPCTL0, SPCTL0_VAL
|
|
|
|
write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART
|
|
|
|
/*
|
|
* add some delay here
|
|
*/
|
|
wait_timer 0x1000
|
|
|
|
/* peripheral clock divider */
|
|
write32 PCDR0, PCDR0_VAL
|
|
write32 PCDR1, PCDR1_VAL
|
|
|
|
/* Configure PCCR0 and PCCR1 */
|
|
write32 PCCR0, PCCR0_VAL
|
|
write32 PCCR1, PCCR1_VAL
|
|
|
|
.endm /* init_clock */
|
|
|
|
.macro sdram_init
|
|
ldr r0, SOC_ESDCTL_BASE_W
|
|
mov r2, #PHYS_SDRAM_1
|
|
|
|
/* Do initial reset */
|
|
mov r1, #ESDMISC_MDDR_DL_RST
|
|
str r1, [r0, #ESDMISC_ROF]
|
|
|
|
/* Hold for more than 200ns */
|
|
wait_timer 0x10000
|
|
|
|
/* Activate LPDDR iface */
|
|
mov r1, #ESDMISC_MDDREN
|
|
str r1, [r0, #ESDMISC_ROF]
|
|
|
|
/* Check The chip version TO1 or TO2 */
|
|
ldr r1, SOC_SI_ID_REG_W
|
|
ldr r1, [r1]
|
|
ands r1, r1, #0xF0000000
|
|
/* add Latency on CAS only for TO2 */
|
|
ldreq r1, SDRAM_ESDCFG_T2_W
|
|
ldrne r1, SDRAM_ESDCFG_T1_W
|
|
str r1, [r0, #ESDCFG0_ROF]
|
|
|
|
/* Run initialization sequence */
|
|
ldr r1, SDRAM_PRECHARGE_CMD_W
|
|
str r1, [r0, #ESDCTL0_ROF]
|
|
ldr r1, [r2, #SDRAM_ALL_VAL]
|
|
|
|
ldr r1, SDRAM_AUTOREF_CMD_W
|
|
str r1, [r0, #ESDCTL0_ROF]
|
|
ldr r1, [r2, #SDRAM_ALL_VAL]
|
|
ldr r1, [r2, #SDRAM_ALL_VAL]
|
|
|
|
ldr r1, SDRAM_LOADMODE_CMD_W
|
|
str r1, [r0, #ESDCTL0_ROF]
|
|
ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
|
|
add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
|
|
ldrb r1, [r3]
|
|
|
|
ldr r1, SDRAM_NORMAL_CMD_W
|
|
str r1, [r0, #ESDCTL0_ROF]
|
|
|
|
#if (CONFIG_NR_DRAM_BANKS > 1)
|
|
/* 2nd sdram */
|
|
mov r2, #PHYS_SDRAM_2
|
|
|
|
/* Check The chip version TO1 or TO2 */
|
|
ldr r1, SOC_SI_ID_REG_W
|
|
ldr r1, [r1]
|
|
ands r1, r1, #0xF0000000
|
|
/* add Latency on CAS only for TO2 */
|
|
ldreq r1, SDRAM_ESDCFG_T2_W
|
|
ldrne r1, SDRAM_ESDCFG_T1_W
|
|
str r1, [r0, #ESDCFG1_ROF]
|
|
|
|
/* Run initialization sequence */
|
|
ldr r1, SDRAM_PRECHARGE_CMD_W
|
|
str r1, [r0, #ESDCTL1_ROF]
|
|
ldr r1, [r2, #SDRAM_ALL_VAL]
|
|
|
|
ldr r1, SDRAM_AUTOREF_CMD_W
|
|
str r1, [r0, #ESDCTL1_ROF]
|
|
ldr r1, [r2, #SDRAM_ALL_VAL]
|
|
ldr r1, [r2, #SDRAM_ALL_VAL]
|
|
|
|
ldr r1, SDRAM_LOADMODE_CMD_W
|
|
str r1, [r0, #ESDCTL1_ROF]
|
|
ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
|
|
add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
|
|
ldrb r1, [r3]
|
|
|
|
ldr r1, SDRAM_NORMAL_CMD_W
|
|
str r1, [r0, #ESDCTL1_ROF]
|
|
#endif /* CONFIG_NR_DRAM_BANKS > 1 */
|
|
|
|
.endm /* sdram_init */
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
|
|
mov r10, lr
|
|
|
|
init_aipi
|
|
|
|
init_clock
|
|
|
|
sdram_init
|
|
|
|
mov pc,r10
|
|
|