upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/renesas/r7780mp/r7780mp.c

86 lines
2.0 KiB

/*
* Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ide.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <netdev.h>
#include "r7780mp.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
#if defined(CONFIG_R7780MP)
puts("BOARD: Renesas Solutions R7780MP\n");
#else
puts("BOARD: Renesas Solutions R7780RP\n");
#endif
return 0;
}
int board_init(void)
{
/* SCIF Enable */
writew(0x0, PHCR);
return 0;
}
int dram_init(void)
{
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
return 0;
}
void led_set_state(unsigned short value)
{
}
void ide_set_reset(int idereset)
{
/* if reset = 1 IDE reset will be asserted */
if (idereset) {
writew(0x432, FPGA_CFCTL);
#if defined(CONFIG_R7780MP)
writew(inw(FPGA_CFPOW)|0x01, FPGA_CFPOW);
#else
writew(inw(FPGA_CFPOW)|0x02, FPGA_CFPOW);
#endif
writew(0x01, FPGA_CFCDINTCLR);
}
}
static struct pci_controller hose;
void pci_init_board(void)
{
pci_sh7780_init(&hose);
}
int board_eth_init(bd_t *bis)
{
/* return >= 0 if a chip is found, the board's AX88796L is n2k-based */
return ne2k_register() + pci_eth_init(bis);
}