upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/usb/host/ehci-hcd.c

930 lines
23 KiB

/*-
* Copyright (c) 2007-2008, Juniper Networks, Inc.
* Copyright (c) 2008, Excito Elektronik i Skåne AB
* Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/byteorder.h>
#include <usb.h>
#include <asm/io.h>
#include <malloc.h>
#include <watchdog.h>
#ifdef CONFIG_USB_KEYBOARD
#include <stdio_dev.h>
extern unsigned char new[];
#endif
#include "ehci.h"
int rootdev;
struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
volatile struct ehci_hcor *hcor;
static uint16_t portreset;
static struct QH qh_list __attribute__((aligned(32)));
static struct descriptor {
struct usb_hub_descriptor hub;
struct usb_device_descriptor device;
struct usb_linux_config_descriptor config;
struct usb_linux_interface_descriptor interface;
struct usb_endpoint_descriptor endpoint;
} __attribute__ ((packed)) descriptor = {
{
0x8, /* bDescLength */
0x29, /* bDescriptorType: hub descriptor */
2, /* bNrPorts -- runtime modified */
0, /* wHubCharacteristics */
10, /* bPwrOn2PwrGood */
0, /* bHubCntrCurrent */
{}, /* Device removable */
{} /* at most 7 ports! XXX */
},
{
0x12, /* bLength */
1, /* bDescriptorType: UDESC_DEVICE */
cpu_to_le16(0x0200), /* bcdUSB: v2.0 */
9, /* bDeviceClass: UDCLASS_HUB */
0, /* bDeviceSubClass: UDSUBCLASS_HUB */
1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */
64, /* bMaxPacketSize: 64 bytes */
0x0000, /* idVendor */
0x0000, /* idProduct */
cpu_to_le16(0x0100), /* bcdDevice */
1, /* iManufacturer */
2, /* iProduct */
0, /* iSerialNumber */
1 /* bNumConfigurations: 1 */
},
{
0x9,
2, /* bDescriptorType: UDESC_CONFIG */
cpu_to_le16(0x19),
1, /* bNumInterface */
1, /* bConfigurationValue */
0, /* iConfiguration */
0x40, /* bmAttributes: UC_SELF_POWER */
0 /* bMaxPower */
},
{
0x9, /* bLength */
4, /* bDescriptorType: UDESC_INTERFACE */
0, /* bInterfaceNumber */
0, /* bAlternateSetting */
1, /* bNumEndpoints */
9, /* bInterfaceClass: UICLASS_HUB */
0, /* bInterfaceSubClass: UISUBCLASS_HUB */
0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */
0 /* iInterface */
},
{
0x7, /* bLength */
5, /* bDescriptorType: UDESC_ENDPOINT */
0x81, /* bEndpointAddress:
* UE_DIR_IN | EHCI_INTR_ENDPT
*/
3, /* bmAttributes: UE_INTERRUPT */
8, /* wMaxPacketSize */
255 /* bInterval */
},
};
#if defined(CONFIG_EHCI_IS_TDI)
#define ehci_is_TDI() (1)
#else
#define ehci_is_TDI() (0)
#endif
#if defined(CONFIG_EHCI_DCACHE)
/*
* Routines to handle (flush/invalidate) the dcache for the QH and qTD
* structures and data buffers. This is needed on platforms using this
* EHCI support with dcache enabled.
*/
static void flush_invalidate(u32 addr, int size, int flush)
{
if (flush)
flush_dcache_range(addr, addr + size);
else
invalidate_dcache_range(addr, addr + size);
}
static void cache_qtd(struct qTD *qtd, int flush)
{
u32 *ptr = (u32 *)qtd->qt_buffer[0];
int len = (qtd->qt_token & 0x7fff0000) >> 16;
flush_invalidate((u32)qtd, sizeof(struct qTD), flush);
if (ptr && len)
flush_invalidate((u32)ptr, len, flush);
}
static inline struct QH *qh_addr(struct QH *qh)
{
return (struct QH *)((u32)qh & 0xffffffe0);
}
static void cache_qh(struct QH *qh, int flush)
{
struct qTD *qtd;
struct qTD *next;
static struct qTD *first_qtd;
/*
* Walk the QH list and flush/invalidate all entries
*/
while (1) {
flush_invalidate((u32)qh_addr(qh), sizeof(struct QH), flush);
if ((u32)qh & QH_LINK_TYPE_QH)
break;
qh = qh_addr(qh);
qh = (struct QH *)qh->qh_link;
}
qh = qh_addr(qh);
/*
* Save first qTD pointer, needed for invalidating pass on this QH
*/
if (flush)
first_qtd = qtd = (struct qTD *)(*(u32 *)&qh->qh_overlay &
0xffffffe0);
else
qtd = first_qtd;
/*
* Walk the qTD list and flush/invalidate all entries
*/
while (1) {
if (qtd == NULL)
break;
cache_qtd(qtd, flush);
next = (struct qTD *)((u32)qtd->qt_next & 0xffffffe0);
if (next == qtd)
break;
qtd = next;
}
}
static inline void ehci_flush_dcache(struct QH *qh)
{
cache_qh(qh, 1);
}
static inline void ehci_invalidate_dcache(struct QH *qh)
{
cache_qh(qh, 0);
}
#else /* CONFIG_EHCI_DCACHE */
/*
*
*/
static inline void ehci_flush_dcache(struct QH *qh)
{
}
static inline void ehci_invalidate_dcache(struct QH *qh)
{
}
#endif /* CONFIG_EHCI_DCACHE */
static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
{
uint32_t result;
do {
result = ehci_readl(ptr);
udelay(5);
if (result == ~(uint32_t)0)
return -1;
result &= mask;
if (result == done)
return 0;
usec--;
} while (usec > 0);
return -1;
}
static void ehci_free(void *p, size_t sz)
{
}
static int ehci_reset(void)
{
uint32_t cmd;
uint32_t tmp;
uint32_t *reg_ptr;
int ret = 0;
cmd = ehci_readl(&hcor->or_usbcmd);
cmd = (cmd & ~CMD_RUN) | CMD_RESET;
ehci_writel(&hcor->or_usbcmd, cmd);
ret = handshake((uint32_t *)&hcor->or_usbcmd, CMD_RESET, 0, 250 * 1000);
if (ret < 0) {
printf("EHCI fail to reset\n");
goto out;
}
if (ehci_is_TDI()) {
reg_ptr = (uint32_t *)((u8 *)hcor + USBMODE);
tmp = ehci_readl(reg_ptr);
tmp |= USBMODE_CM_HC;
#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
tmp |= USBMODE_BE;
#endif
ehci_writel(reg_ptr, tmp);
}
out:
return ret;
}
static void *ehci_alloc(size_t sz, size_t align)
{
static struct QH qh __attribute__((aligned(32)));
static struct qTD td[3] __attribute__((aligned (32)));
static int ntds;
void *p;
switch (sz) {
case sizeof(struct QH):
p = &qh;
ntds = 0;
break;
case sizeof(struct qTD):
if (ntds == 3) {
debug("out of TDs\n");
return NULL;
}
p = &td[ntds];
ntds++;
break;
default:
debug("unknown allocation size\n");
return NULL;
}
memset(p, 0, sz);
return p;
}
static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
{
uint32_t addr, delta, next;
int idx;
addr = (uint32_t) buf;
idx = 0;
while (idx < 5) {
td->qt_buffer[idx] = cpu_to_hc32(addr);
td->qt_buffer_hi[idx] = 0;
next = (addr + 4096) & ~4095;
delta = next - addr;
if (delta >= sz)
break;
sz -= delta;
addr = next;
idx++;
}
if (idx == 5) {
debug("out of buffer pointers (%u bytes left)\n", sz);
return -1;
}
return 0;
}
static int
ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
{
struct QH *qh;
struct qTD *td;
volatile struct qTD *vtd;
unsigned long ts;
uint32_t *tdp;
uint32_t endpt, token, usbsts;
uint32_t c, toggle;
uint32_t cmd;
int timeout;
int ret = 0;
debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe,
buffer, length, req);
if (req != NULL)
debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n",
req->request, req->request,
req->requesttype, req->requesttype,
le16_to_cpu(req->value), le16_to_cpu(req->value),
le16_to_cpu(req->index));
qh = ehci_alloc(sizeof(struct QH), 32);
if (qh == NULL) {
debug("unable to allocate QH\n");
return -1;
}
qh->qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
c = (usb_pipespeed(pipe) != USB_SPEED_HIGH &&
usb_pipeendpoint(pipe) == 0) ? 1 : 0;
endpt = (8 << 28) |
(c << 27) |
(usb_maxpacket(dev, pipe) << 16) |
(0 << 15) |
(1 << 14) |
(usb_pipespeed(pipe) << 12) |
(usb_pipeendpoint(pipe) << 8) |
(0 << 7) | (usb_pipedevice(pipe) << 0);
qh->qh_endpt1 = cpu_to_hc32(endpt);
endpt = (1 << 30) |
(dev->portnr << 23) |
(dev->parent->devnum << 16) | (0 << 8) | (0 << 0);
qh->qh_endpt2 = cpu_to_hc32(endpt);
qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
td = NULL;
tdp = &qh->qh_overlay.qt_next;
toggle =
usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
if (req != NULL) {
td = ehci_alloc(sizeof(struct qTD), 32);
if (td == NULL) {
debug("unable to allocate SETUP td\n");
goto fail;
}
td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
token = (0 << 31) |
(sizeof(*req) << 16) |
(0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0);
td->qt_token = cpu_to_hc32(token);
if (ehci_td_buffer(td, req, sizeof(*req)) != 0) {
debug("unable construct SETUP td\n");
ehci_free(td, sizeof(*td));
goto fail;
}
*tdp = cpu_to_hc32((uint32_t) td);
tdp = &td->qt_next;
toggle = 1;
}
if (length > 0 || req == NULL) {
td = ehci_alloc(sizeof(struct qTD), 32);
if (td == NULL) {
debug("unable to allocate DATA td\n");
goto fail;
}
td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
token = (toggle << 31) |
(length << 16) |
((req == NULL ? 1 : 0) << 15) |
(0 << 12) |
(3 << 10) |
((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0);
td->qt_token = cpu_to_hc32(token);
if (ehci_td_buffer(td, buffer, length) != 0) {
debug("unable construct DATA td\n");
ehci_free(td, sizeof(*td));
goto fail;
}
*tdp = cpu_to_hc32((uint32_t) td);
tdp = &td->qt_next;
}
if (req != NULL) {
td = ehci_alloc(sizeof(struct qTD), 32);
if (td == NULL) {
debug("unable to allocate ACK td\n");
goto fail;
}
td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
token = (toggle << 31) |
(0 << 16) |
(1 << 15) |
(0 << 12) |
(3 << 10) |
((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0);
td->qt_token = cpu_to_hc32(token);
*tdp = cpu_to_hc32((uint32_t) td);
tdp = &td->qt_next;
}
qh_list.qh_link = cpu_to_hc32((uint32_t) qh | QH_LINK_TYPE_QH);
/* Flush dcache */
ehci_flush_dcache(&qh_list);
usbsts = ehci_readl(&hcor->or_usbsts);
ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f));
/* Enable async. schedule. */
cmd = ehci_readl(&hcor->or_usbcmd);
cmd |= CMD_ASE;
ehci_writel(&hcor->or_usbcmd, cmd);
ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, STD_ASS,
100 * 1000);
if (ret < 0) {
printf("EHCI fail timeout STD_ASS set\n");
goto fail;
}
/* Wait for TDs to be processed. */
ts = get_timer(0);
vtd = td;
timeout = USB_TIMEOUT_MS(pipe);
do {
/* Invalidate dcache */
ehci_invalidate_dcache(&qh_list);
token = hc32_to_cpu(vtd->qt_token);
if (!(token & 0x80))
break;
WATCHDOG_RESET();
} while (get_timer(ts) < timeout);
/* Check that the TD processing happened */
if (token & 0x80) {
printf("EHCI timed out on TD - token=%#x\n", token);
}
/* Disable async schedule. */
cmd = ehci_readl(&hcor->or_usbcmd);
cmd &= ~CMD_ASE;
ehci_writel(&hcor->or_usbcmd, cmd);
ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, 0,
100 * 1000);
if (ret < 0) {
printf("EHCI fail timeout STD_ASS reset\n");
goto fail;
}
qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
token = hc32_to_cpu(qh->qh_overlay.qt_token);
if (!(token & 0x80)) {
debug("TOKEN=%#x\n", token);
switch (token & 0xfc) {
case 0:
toggle = token >> 31;
usb_settoggle(dev, usb_pipeendpoint(pipe),
usb_pipeout(pipe), toggle);
dev->status = 0;
break;
case 0x40:
dev->status = USB_ST_STALLED;
break;
case 0xa0:
case 0x20:
dev->status = USB_ST_BUF_ERR;
break;
case 0x50:
case 0x10:
dev->status = USB_ST_BABBLE_DET;
break;
default:
dev->status = USB_ST_CRC_ERR;
if ((token & 0x40) == 0x40)
dev->status |= USB_ST_STALLED;
break;
}
dev->act_len = length - ((token >> 16) & 0x7fff);
} else {
dev->act_len = 0;
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
dev->devnum, ehci_readl(&hcor->or_usbsts),
ehci_readl(&hcor->or_portsc[0]),
ehci_readl(&hcor->or_portsc[1]));
}
return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
fail:
td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next);
while (td != (void *)QT_NEXT_TERMINATE) {
qh->qh_overlay.qt_next = td->qt_next;
ehci_free(td, sizeof(*td));
td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next);
}
ehci_free(qh, sizeof(*qh));
return -1;
}
static inline int min3(int a, int b, int c)
{
if (b < a)
a = b;
if (c < a)
a = c;
return a;
}
int
ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
{
uint8_t tmpbuf[4];
u16 typeReq;
void *srcptr = NULL;
int len, srclen;
uint32_t reg;
uint32_t *status_reg;
if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
printf("The request port(%d) is not configured\n",
le16_to_cpu(req->index) - 1);
return -1;
}
status_reg = (uint32_t *)&hcor->or_portsc[
le16_to_cpu(req->index) - 1];
srclen = 0;
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
req->request, req->request,
req->requesttype, req->requesttype,
le16_to_cpu(req->value), le16_to_cpu(req->index));
typeReq = req->request | req->requesttype << 8;
switch (typeReq) {
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (le16_to_cpu(req->value) >> 8) {
case USB_DT_DEVICE:
debug("USB_DT_DEVICE request\n");
srcptr = &descriptor.device;
srclen = 0x12;
break;
case USB_DT_CONFIG:
debug("USB_DT_CONFIG config\n");
srcptr = &descriptor.config;
srclen = 0x19;
break;
case USB_DT_STRING:
debug("USB_DT_STRING config\n");
switch (le16_to_cpu(req->value) & 0xff) {
case 0: /* Language */
srcptr = "\4\3\1\0";
srclen = 4;
break;
case 1: /* Vendor */
srcptr = "\16\3u\0-\0b\0o\0o\0t\0";
srclen = 14;
break;
case 2: /* Product */
srcptr = "\52\3E\0H\0C\0I\0 "
"\0H\0o\0s\0t\0 "
"\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
srclen = 42;
break;
default:
debug("unknown value DT_STRING %x\n",
le16_to_cpu(req->value));
goto unknown;
}
break;
default:
debug("unknown value %x\n", le16_to_cpu(req->value));
goto unknown;
}
break;
case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
switch (le16_to_cpu(req->value) >> 8) {
case USB_DT_HUB:
debug("USB_DT_HUB config\n");
srcptr = &descriptor.hub;
srclen = 0x8;
break;
default:
debug("unknown value %x\n", le16_to_cpu(req->value));
goto unknown;
}
break;
case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
debug("USB_REQ_SET_ADDRESS\n");
rootdev = le16_to_cpu(req->value);
break;
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
debug("USB_REQ_SET_CONFIGURATION\n");
/* Nothing to do */
break;
case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */
tmpbuf[1] = 0;
srcptr = tmpbuf;
srclen = 2;
break;
case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
memset(tmpbuf, 0, 4);
reg = ehci_readl(status_reg);
if (reg & EHCI_PS_CS)
tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
if (reg & EHCI_PS_PE)
tmpbuf[0] |= USB_PORT_STAT_ENABLE;
if (reg & EHCI_PS_SUSP)
tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
if (reg & EHCI_PS_OCA)
tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
if (reg & EHCI_PS_PR)
tmpbuf[0] |= USB_PORT_STAT_RESET;
if (reg & EHCI_PS_PP)
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
if (ehci_is_TDI()) {
switch ((reg >> 26) & 3) {
case 0:
break;
case 1:
tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
break;
case 2:
default:
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
break;
}
} else {
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
}
if (reg & EHCI_PS_CSC)
tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
if (reg & EHCI_PS_PEC)
tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
if (reg & EHCI_PS_OCC)
tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
if (portreset & (1 << le16_to_cpu(req->index)))
tmpbuf[2] |= USB_PORT_STAT_C_RESET;
srcptr = tmpbuf;
srclen = 4;
break;
case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
reg &= ~EHCI_PS_CLEAR;
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg |= EHCI_PS_PE;
ehci_writel(status_reg, reg);
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) {
reg |= EHCI_PS_PP;
ehci_writel(status_reg, reg);
}
break;
case USB_PORT_FEAT_RESET:
if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS &&
!ehci_is_TDI() &&
EHCI_PS_IS_LOWSPEED(reg)) {
/* Low speed device, give up ownership. */
debug("port %d low speed --> companion\n",
req->index - 1);
reg |= EHCI_PS_PO;
ehci_writel(status_reg, reg);
break;
} else {
int ret;
reg |= EHCI_PS_PR;
reg &= ~EHCI_PS_PE;
ehci_writel(status_reg, reg);
/*
* caller must wait, then call GetPortStatus
* usb 2.0 specification say 50 ms resets on
* root
*/
wait_ms(50);
/* terminate the reset */
ehci_writel(status_reg, reg & ~EHCI_PS_PR);
/*
* A host controller must terminate the reset
* and stabilize the state of the port within
* 2 milliseconds
*/
ret = handshake(status_reg, EHCI_PS_PR, 0,
2 * 1000);
if (!ret)
portreset |=
1 << le16_to_cpu(req->index);
else
printf("port(%d) reset error\n",
le16_to_cpu(req->index) - 1);
}
break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
goto unknown;
}
/* unblock posted writes */
(void) ehci_readl(&hcor->or_usbcmd);
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg &= ~EHCI_PS_PE;
break;
case USB_PORT_FEAT_C_ENABLE:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams)))
reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
case USB_PORT_FEAT_C_CONNECTION:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
break;
case USB_PORT_FEAT_OVER_CURRENT:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
portreset &= ~(1 << le16_to_cpu(req->index));
break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
goto unknown;
}
ehci_writel(status_reg, reg);
/* unblock posted write */
(void) ehci_readl(&hcor->or_usbcmd);
break;
default:
debug("Unknown request\n");
goto unknown;
}
wait_ms(1);
len = min3(srclen, le16_to_cpu(req->length), length);
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
else
debug("Len is 0\n");
dev->act_len = len;
dev->status = 0;
return 0;
unknown:
debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n",
req->requesttype, req->request, le16_to_cpu(req->value),
le16_to_cpu(req->index), le16_to_cpu(req->length));
dev->act_len = 0;
dev->status = USB_ST_STALLED;
return -1;
}
int usb_lowlevel_stop(void)
{
return ehci_hcd_stop();
}
int usb_lowlevel_init(void)
{
uint32_t reg;
uint32_t cmd;
if (ehci_hcd_init() != 0)
return -1;
/* EHCI spec section 4.1 */
if (ehci_reset() != 0)
return -1;
#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET)
if (ehci_hcd_init() != 0)
return -1;
#endif
/* Set head of reclaim list */
memset(&qh_list, 0, sizeof(qh_list));
qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
qh_list.qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12));
qh_list.qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list.qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list.qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list.qh_overlay.qt_token = cpu_to_hc32(0x40);
/* Set async. queue head pointer. */
ehci_writel(&hcor->or_asynclistaddr, (uint32_t)&qh_list);
reg = ehci_readl(&hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
/* Port Indicators */
if (HCS_INDICATOR(reg))
descriptor.hub.wHubCharacteristics |= 0x80;
/* Port Power Control */
if (HCS_PPC(reg))
descriptor.hub.wHubCharacteristics |= 0x01;
/* Start the host controller. */
cmd = ehci_readl(&hcor->or_usbcmd);
/*
* Philips, Intel, and maybe others need CMD_RUN before the
* root hub will detect new devices (why?); NEC doesn't
*/
cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
cmd |= CMD_RUN;
ehci_writel(&hcor->or_usbcmd, cmd);
/* take control over the ports */
cmd = ehci_readl(&hcor->or_configflag);
cmd |= FLAG_CF;
ehci_writel(&hcor->or_configflag, cmd);
/* unblock posted write */
cmd = ehci_readl(&hcor->or_usbcmd);
wait_ms(5);
reg = HC_VERSION(ehci_readl(&hccr->cr_capbase));
printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff);
rootdev = 0;
return 0;
}
int
submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length)
{
if (usb_pipetype(pipe) != PIPE_BULK) {
debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
return -1;
}
return ehci_submit_async(dev, pipe, buffer, length, NULL);
}
int
submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *setup)
{
if (usb_pipetype(pipe) != PIPE_CONTROL) {
debug("non-control pipe (type=%lu)", usb_pipetype(pipe));
return -1;
}
if (usb_pipedevice(pipe) == rootdev) {
if (rootdev == 0)
dev->speed = USB_SPEED_HIGH;
return ehci_submit_root(dev, pipe, buffer, length, setup);
}
return ehci_submit_async(dev, pipe, buffer, length, setup);
}
int
submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, int interval)
{
debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
dev, pipe, buffer, length, interval);
return ehci_submit_async(dev, pipe, buffer, length, NULL);
}
#ifdef CONFIG_SYS_USB_EVENT_POLL
/*
* This function polls for USB keyboard data.
*/
void usb_event_poll()
{
struct stdio_dev *dev;
struct usb_device *usb_kbd_dev;
struct usb_interface *iface;
struct usb_endpoint_descriptor *ep;
int pipe;
int maxp;
/* Get the pointer to USB Keyboard device pointer */
dev = stdio_get_by_name("usbkbd");
usb_kbd_dev = (struct usb_device *)dev->priv;
iface = &usb_kbd_dev->config.if_desc[0];
ep = &iface->ep_desc[0];
pipe = usb_rcvintpipe(usb_kbd_dev, ep->bEndpointAddress);
/* Submit a interrupt transfer request */
maxp = usb_maxpacket(usb_kbd_dev, pipe);
usb_submit_int_msg(usb_kbd_dev, pipe, &new[0],
maxp > 8 ? 8 : maxp, ep->bInterval);
}
#endif /* CONFIG_SYS_USB_EVENT_POLL */