upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
147 lines
3.7 KiB
147 lines
3.7 KiB
/*
|
|
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <usb/ehci-fsl.h>
|
|
#include <errno.h>
|
|
|
|
#include "ehci.h"
|
|
#include "ehci-core.h"
|
|
|
|
#define USBCTRL_OTGBASE_OFFSET 0x600
|
|
|
|
#ifdef CONFIG_MX25
|
|
#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6)
|
|
#define MX25_USB_CTRL_HSTD_BIT (1<<5)
|
|
#define MX25_USB_CTRL_USBTE_BIT (1<<4)
|
|
#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3)
|
|
#endif
|
|
|
|
#ifdef CONFIG_MX31
|
|
#define MX31_OTG_SIC_SHIFT 29
|
|
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
|
|
#define MX31_OTG_PM_BIT (1 << 24)
|
|
|
|
#define MX31_H2_SIC_SHIFT 21
|
|
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
|
|
#define MX31_H2_PM_BIT (1 << 16)
|
|
#define MX31_H2_DT_BIT (1 << 5)
|
|
|
|
#define MX31_H1_SIC_SHIFT 13
|
|
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
|
|
#define MX31_H1_PM_BIT (1 << 8)
|
|
#define MX31_H1_DT_BIT (1 << 4)
|
|
#endif
|
|
|
|
static int mxc_set_usbcontrol(int port, unsigned int flags)
|
|
{
|
|
unsigned int v;
|
|
|
|
#ifdef CONFIG_MX25
|
|
v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT |
|
|
MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT;
|
|
#endif
|
|
|
|
#ifdef CONFIG_MX31
|
|
v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
|
|
|
|
switch (port) {
|
|
case 0: /* OTG port */
|
|
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
|
|
v |= (flags & MXC_EHCI_INTERFACE_MASK)
|
|
<< MX31_OTG_SIC_SHIFT;
|
|
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
|
|
v |= MX31_OTG_PM_BIT;
|
|
|
|
break;
|
|
case 1: /* H1 port */
|
|
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT |
|
|
MX31_H1_DT_BIT);
|
|
v |= (flags & MXC_EHCI_INTERFACE_MASK)
|
|
<< MX31_H1_SIC_SHIFT;
|
|
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
|
|
v |= MX31_H1_PM_BIT;
|
|
|
|
if (!(flags & MXC_EHCI_TTL_ENABLED))
|
|
v |= MX31_H1_DT_BIT;
|
|
|
|
break;
|
|
case 2: /* H2 port */
|
|
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT |
|
|
MX31_H2_DT_BIT);
|
|
v |= (flags & MXC_EHCI_INTERFACE_MASK)
|
|
<< MX31_H2_SIC_SHIFT;
|
|
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
|
|
v |= MX31_H2_PM_BIT;
|
|
|
|
if (!(flags & MXC_EHCI_TTL_ENABLED))
|
|
v |= MX31_H2_DT_BIT;
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_init(void)
|
|
{
|
|
struct usb_ehci *ehci;
|
|
#ifdef CONFIG_MX31
|
|
struct clock_control_regs *sc_regs =
|
|
(struct clock_control_regs *)CCM_BASE;
|
|
|
|
__raw_readl(&sc_regs->ccmr);
|
|
__raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ;
|
|
#endif
|
|
|
|
udelay(80);
|
|
|
|
ehci = (struct usb_ehci *)(IMX_USB_BASE +
|
|
(0x200 * CONFIG_MXC_USB_PORT));
|
|
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
|
|
hcor = (struct ehci_hcor *)((uint32_t) hccr +
|
|
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
#ifdef CONFIG_MX31
|
|
setbits_le32(&ehci->control, USB_EN);
|
|
|
|
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
|
|
#endif
|
|
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
|
|
|
|
udelay(10000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Destroy the appropriate control structures corresponding
|
|
* the the EHCI host controller.
|
|
*/
|
|
int ehci_hcd_stop(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|