upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h

90 lines
2.3 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* hardware_am43xx.h
*
* AM43xx hardware specific header
*
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*/
#ifndef __AM43XX_HARDWARE_AM43XX_H
#define __AM43XX_HARDWARE_AM43XX_H
/* Module base addresses */
/* L3 Fast Configuration Bandwidth Limiter Base Address */
#define L3F_CFG_BWLIMITER 0x44005200
/* UART Base Address */
#define UART0_BASE 0x44E09000
/* GPIO Base address */
#define GPIO2_BASE 0x481AC000
/* Watchdog Timer */
#define WDT_BASE 0x44E35000
/* Control Module Base Address */
#define CTRL_BASE 0x44E10000
#define CTRL_DEVICE_BASE 0x44E10600
/* PRCM Base Address */
#define PRCM_BASE 0x44DF0000
#define CM_WKUP 0x44DF2800
#define CM_PER 0x44DF8800
#define CM_DPLL 0x44DF4200
#define CM_RTC 0x44DF8500
#define PRM_RSTCTRL (PRCM_BASE + 0x4000)
#define PRM_RSTST (PRM_RSTCTRL + 4)
/* VTP Base address */
#define VTP0_CTRL_ADDR 0x44E10E0C
#define VTP1_CTRL_ADDR 0x48140E10
/* USB CTRL Base Address */
#define USB1_CTRL 0x44e10628
#define USB1_CTRL_CM_PWRDN BIT(0)
#define USB1_CTRL_OTG_PWRDN BIT(1)
/* DDR Base address */
#define DDR_PHY_CMD_ADDR 0x44E12000
#define DDR_PHY_DATA_ADDR 0x44E120C8
#define DDR_PHY_CMD_ADDR2 0x47C0C800
#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
#define DDR_DATA_REGS_NR 2
/* CPSW Config space */
#define CPSW_MDIO_BASE 0x4A101000
/* RTC base address */
#define RTC_BASE 0x44E3E000
/* USB OTG */
#define USB_OTG_SS1_BASE 0x48390000
#define USB_OTG_SS1_GLUE_BASE 0x48380000
#define USB2_PHY1_POWER 0x44E10620
#define USB_OTG_SS2_BASE 0x483D0000
#define USB_OTG_SS2_GLUE_BASE 0x483C0000
#define USB2_PHY2_POWER 0x44E10628
/* USB Clock Control */
#define PRM_PER_USB_OTG_SS0_CLKCTRL (CM_PER + 0x260)
#define PRM_PER_USB_OTG_SS1_CLKCTRL (CM_PER + 0x268)
#define USBOTGSSX_CLKCTRL_MODULE_EN (1 << 1)
#define USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960 (1 << 8)
#define PRM_PER_USBPHYOCP2SCP0_CLKCTRL (CM_PER + 0x5b8)
#define PRM_PER_USBPHYOCP2SCP1_CLKCTRL (CM_PER + 0x5c0)
#define USBPHYOCPSCP_MODULE_EN (1 << 1)
#define CM_DEVICE_INST 0x44df4100
#define PRM_DEVICE_INST 0x44df4000
#define USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960 (1 << 8)
#define USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K (1 << 8)
/* EDMA3 Base Address */
#define EDMA3_BASE 0x49000000
#endif /* __AM43XX_HARDWARE_AM43XX_H */