upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/s32v234evb/lpddr2.c

137 lines
4.1 KiB

/*
* (C) Copyright 2015, Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/siul.h>
#include <asm/arch/lpddr2.h>
#include <asm/arch/mmdc.h>
volatile int mscr_offset_ck0;
void lpddr2_config_iomux(uint8_t module)
{
int i;
switch (module) {
case DDR0:
mscr_offset_ck0 = SIUL2_MSCRn(_DDR0_CKE0);
writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR0_CLK0));
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE0));
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR0_CKE1));
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B0));
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR0_CS_B1));
for (i = _DDR0_DM0; i <= _DDR0_DM3; i++)
writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i));
for (i = _DDR0_DQS0; i <= _DDR0_DQS3; i++)
writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i));
for (i = _DDR0_A0; i <= _DDR0_A9; i++)
writel(LPDDR2_An_PAD, SIUL2_MSCRn(i));
for (i = _DDR0_D0; i <= _DDR0_D31; i++)
writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i));
break;
case DDR1:
writel(LPDDR2_CLK0_PAD, SIUL2_MSCRn(_DDR1_CLK0));
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE0));
writel(LPDDR2_CKEn_PAD, SIUL2_MSCRn(_DDR1_CKE1));
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B0));
writel(LPDDR2_CS_Bn_PAD, SIUL2_MSCRn(_DDR1_CS_B1));
for (i = _DDR1_DM0; i <= _DDR1_DM3; i++)
writel(LPDDR2_DMn_PAD, SIUL2_MSCRn(i));
for (i = _DDR1_DQS0; i <= _DDR1_DQS3; i++)
writel(LPDDR2_DQSn_PAD, SIUL2_MSCRn(i));
for (i = _DDR1_A0; i <= _DDR1_A9; i++)
writel(LPDDR2_An_PAD, SIUL2_MSCRn(i));
for (i = _DDR1_D0; i <= _DDR1_D31; i++)
writel(LPDDR2_Dn_PAD, SIUL2_MSCRn(i));
break;
}
}
void config_mmdc(uint8_t module)
{
unsigned long mmdc_addr = (module) ? MMDC1_BASE_ADDR : MMDC0_BASE_ADDR;
writel(MMDC_MDSCR_CFG_VALUE, mmdc_addr + MMDC_MDSCR);
writel(MMDC_MDCFG0_VALUE, mmdc_addr + MMDC_MDCFG0);
writel(MMDC_MDCFG1_VALUE, mmdc_addr + MMDC_MDCFG1);
writel(MMDC_MDCFG2_VALUE, mmdc_addr + MMDC_MDCFG2);
writel(MMDC_MDCFG3LP_VALUE, mmdc_addr + MMDC_MDCFG3LP);
writel(MMDC_MDOTC_VALUE, mmdc_addr + MMDC_MDOTC);
writel(MMDC_MDMISC_VALUE, mmdc_addr + MMDC_MDMISC);
writel(MMDC_MDOR_VALUE, mmdc_addr + MMDC_MDOR);
writel(_MDCTL, mmdc_addr + MMDC_MDCTL);
writel(MMDC_MPMUR0_VALUE, mmdc_addr + MMDC_MPMUR0);
while (readl(mmdc_addr + MMDC_MPMUR0) & MMDC_MPMUR0_FRC_MSR) {
}
writel(MMDC_MDSCR_RST_VALUE, mmdc_addr + MMDC_MDSCR);
/* Perform ZQ calibration */
writel(MMDC_MPZQLP2CTL_VALUE, mmdc_addr + MMDC_MPZQLP2CTL);
writel(MMDC_MPZQHWCTRL_VALUE, mmdc_addr + MMDC_MPZQHWCTRL);
while (readl(mmdc_addr + MMDC_MPZQHWCTRL) & MMDC_MPZQHWCTRL_ZQ_HW_FOR) {
}
/* Enable MMDC with CS0 */
writel(_MDCTL + 0x80000000, mmdc_addr + MMDC_MDCTL);
/* Complete the initialization sequence as defined by JEDEC */
writel(MMDC_MDSCR_MR1_VALUE, mmdc_addr + MMDC_MDSCR);
writel(MMDC_MDSCR_MR2_VALUE, mmdc_addr + MMDC_MDSCR);
writel(MMDC_MDSCR_MR3_VALUE, mmdc_addr + MMDC_MDSCR);
writel(MMDC_MDSCR_MR10_VALUE, mmdc_addr + MMDC_MDSCR);
/* Set the amount of DRAM */
/* Set DQS settings based on board type */
switch (module) {
case MMDC0:
writel(MMDC_MDASP_MODULE0_VALUE, mmdc_addr + MMDC_MDASP);
writel(MMDC_MPRDDLCTL_MODULE0_VALUE,
mmdc_addr + MMDC_MPRDDLCTL);
writel(MMDC_MPWRDLCTL_MODULE0_VALUE,
mmdc_addr + MMDC_MPWRDLCTL);
writel(MMDC_MPDGCTRL0_MODULE0_VALUE,
mmdc_addr + MMDC_MPDGCTRL0);
writel(MMDC_MPDGCTRL1_MODULE0_VALUE,
mmdc_addr + MMDC_MPDGCTRL1);
break;
case MMDC1:
writel(MMDC_MDASP_MODULE1_VALUE, mmdc_addr + MMDC_MDASP);
writel(MMDC_MPRDDLCTL_MODULE1_VALUE,
mmdc_addr + MMDC_MPRDDLCTL);
writel(MMDC_MPWRDLCTL_MODULE1_VALUE,
mmdc_addr + MMDC_MPWRDLCTL);
writel(MMDC_MPDGCTRL0_MODULE1_VALUE,
mmdc_addr + MMDC_MPDGCTRL0);
writel(MMDC_MPDGCTRL1_MODULE1_VALUE,
mmdc_addr + MMDC_MPDGCTRL1);
break;
}
writel(MMDC_MDRWD_VALUE, mmdc_addr + MMDC_MDRWD);
writel(MMDC_MDPDC_VALUE, mmdc_addr + MMDC_MDPDC);
writel(MMDC_MDREF_VALUE, mmdc_addr + MMDC_MDREF);
writel(MMDC_MPODTCTRL_VALUE, mmdc_addr + MMDC_MPODTCTRL);
writel(MMDC_MDSCR_DEASSERT_VALUE, mmdc_addr + MMDC_MDSCR);
}