upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
435 lines
12 KiB
435 lines
12 KiB
/*
|
|
* Copyright (c) 2001 Navin Boppuri / Prashant Patel
|
|
* <nboppuri@trinetcommunication.com>,
|
|
* <pmpatel@trinetcommunication.com>
|
|
* Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
|
|
* Copyright (c) 2001-2003 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* MPC8260 CPM SPI interface.
|
|
*
|
|
* Parts of this code are probably not portable and/or specific to
|
|
* the board which I used for the tests. Please send fixes/complaints
|
|
* to wd@denx.de
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/cpm_8260.h>
|
|
#include <linux/ctype.h>
|
|
#include <malloc.h>
|
|
#include <post.h>
|
|
#include <net.h>
|
|
|
|
#if defined(CONFIG_SPI)
|
|
|
|
/* Warning:
|
|
* You cannot enable DEBUG for early system initalization, i. e. when
|
|
* this driver is used to read environment parameters like "baudrate"
|
|
* from EEPROM which are used to initialize the serial port which is
|
|
* needed to print the debug messages...
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#define SPI_EEPROM_WREN 0x06
|
|
#define SPI_EEPROM_RDSR 0x05
|
|
#define SPI_EEPROM_READ 0x03
|
|
#define SPI_EEPROM_WRITE 0x02
|
|
|
|
/* ---------------------------------------------------------------
|
|
* Offset for initial SPI buffers in DPRAM:
|
|
* We need a 520 byte scratch DPRAM area to use at an early stage.
|
|
* It is used between the two initialization calls (spi_init_f()
|
|
* and spi_init_r()).
|
|
* The value 0x2000 makes it far enough from the start of the data
|
|
* area (as well as from the stack pointer).
|
|
* --------------------------------------------------------------- */
|
|
#ifndef CONFIG_SYS_SPI_INIT_OFFSET
|
|
#define CONFIG_SYS_SPI_INIT_OFFSET 0x2000
|
|
#endif
|
|
|
|
#define CPM_SPI_BASE 0x100
|
|
|
|
#ifdef DEBUG
|
|
|
|
#define DPRINT(a) printf a;
|
|
/* -----------------------------------------------
|
|
* Helper functions to peek into tx and rx buffers
|
|
* ----------------------------------------------- */
|
|
static const char * const hex_digit = "0123456789ABCDEF";
|
|
|
|
static char quickhex (int i)
|
|
{
|
|
return hex_digit[i];
|
|
}
|
|
|
|
static void memdump (void *pv, int num)
|
|
{
|
|
int i;
|
|
unsigned char *pc = (unsigned char *) pv;
|
|
|
|
for (i = 0; i < num; i++)
|
|
printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
|
|
printf ("\t");
|
|
for (i = 0; i < num; i++)
|
|
printf ("%c", isprint (pc[i]) ? pc[i] : '.');
|
|
printf ("\n");
|
|
}
|
|
#else /* !DEBUG */
|
|
|
|
#define DPRINT(a)
|
|
|
|
#endif /* DEBUG */
|
|
|
|
/* -------------------
|
|
* Function prototypes
|
|
* ------------------- */
|
|
void spi_init (void);
|
|
|
|
ssize_t spi_read (uchar *, int, uchar *, int);
|
|
ssize_t spi_write (uchar *, int, uchar *, int);
|
|
ssize_t spi_xfer (size_t);
|
|
|
|
/* -------------------
|
|
* Variables
|
|
* ------------------- */
|
|
|
|
#define MAX_BUFFER 0x104
|
|
|
|
/* ----------------------------------------------------------------------
|
|
* Initially we place the RX and TX buffers at a fixed location in DPRAM!
|
|
* ---------------------------------------------------------------------- */
|
|
static uchar *rxbuf =
|
|
(uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
|
|
[CONFIG_SYS_SPI_INIT_OFFSET];
|
|
static uchar *txbuf =
|
|
(uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
|
|
[CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
|
|
|
|
/* **************************************************************************
|
|
*
|
|
* Function: spi_init_f
|
|
*
|
|
* Description: Init SPI-Controller (ROM part)
|
|
*
|
|
* return: ---
|
|
*
|
|
* *********************************************************************** */
|
|
void spi_init_f (void)
|
|
{
|
|
unsigned int dpaddr;
|
|
|
|
volatile spi_t *spi;
|
|
volatile immap_t *immr;
|
|
volatile cpm8260_t *cp;
|
|
volatile cbd_t *tbdf, *rbdf;
|
|
|
|
immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
cp = (cpm8260_t *) &immr->im_cpm;
|
|
|
|
*(ushort *)(&immr->im_dprambase[PROFF_SPI_BASE]) = PROFF_SPI;
|
|
spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
|
|
|
|
/* 1 */
|
|
/* ------------------------------------------------
|
|
* Initialize Port D SPI pins
|
|
* (we are only in Master Mode !)
|
|
* ------------------------------------------------ */
|
|
|
|
/* --------------------------------------------
|
|
* GPIO or per. Function
|
|
* PPARD[16] = 1 [0x00008000] (SPIMISO)
|
|
* PPARD[17] = 1 [0x00004000] (SPIMOSI)
|
|
* PPARD[18] = 1 [0x00002000] (SPICLK)
|
|
* PPARD[12] = 0 [0x00080000] -> GPIO: (CS for ATC EEPROM)
|
|
* -------------------------------------------- */
|
|
immr->im_ioport.iop_ppard |= 0x0000E000; /* set bits */
|
|
immr->im_ioport.iop_ppard &= ~0x00080000; /* reset bit */
|
|
|
|
/* ----------------------------------------------
|
|
* In/Out or per. Function 0/1
|
|
* PDIRD[16] = 0 [0x00008000] -> PERI1: SPIMISO
|
|
* PDIRD[17] = 0 [0x00004000] -> PERI1: SPIMOSI
|
|
* PDIRD[18] = 0 [0x00002000] -> PERI1: SPICLK
|
|
* PDIRD[12] = 1 [0x00080000] -> GPIO OUT: CS for ATC EEPROM
|
|
* ---------------------------------------------- */
|
|
immr->im_ioport.iop_pdird &= ~0x0000E000;
|
|
immr->im_ioport.iop_pdird |= 0x00080000;
|
|
|
|
/* ----------------------------------------------
|
|
* special option reg.
|
|
* PSORD[16] = 1 [0x00008000] -> SPIMISO
|
|
* PSORD[17] = 1 [0x00004000] -> SPIMOSI
|
|
* PSORD[18] = 1 [0x00002000] -> SPICLK
|
|
* ---------------------------------------------- */
|
|
immr->im_ioport.iop_psord |= 0x0000E000;
|
|
|
|
/* Initialize the parameter ram.
|
|
* We need to make sure many things are initialized to zero
|
|
*/
|
|
spi->spi_rstate = 0;
|
|
spi->spi_rdp = 0;
|
|
spi->spi_rbptr = 0;
|
|
spi->spi_rbc = 0;
|
|
spi->spi_rxtmp = 0;
|
|
spi->spi_tstate = 0;
|
|
spi->spi_tdp = 0;
|
|
spi->spi_tbptr = 0;
|
|
spi->spi_tbc = 0;
|
|
spi->spi_txtmp = 0;
|
|
|
|
/* Allocate space for one transmit and one receive buffer
|
|
* descriptor in the DP ram
|
|
*/
|
|
#ifdef CONFIG_SYS_ALLOC_DPRAM
|
|
dpaddr = m8260_cpm_dpalloc (sizeof(cbd_t)*2, 8);
|
|
#else
|
|
dpaddr = CPM_SPI_BASE;
|
|
#endif
|
|
|
|
/* 3 */
|
|
/* Set up the SPI parameters in the parameter ram */
|
|
spi->spi_rbase = dpaddr;
|
|
spi->spi_tbase = dpaddr + sizeof (cbd_t);
|
|
|
|
/***********IMPORTANT******************/
|
|
|
|
/*
|
|
* Setting transmit and receive buffer descriptor pointers
|
|
* initially to rbase and tbase. Only the microcode patches
|
|
* documentation talks about initializing this pointer. This
|
|
* is missing from the sample I2C driver. If you dont
|
|
* initialize these pointers, the kernel hangs.
|
|
*/
|
|
spi->spi_rbptr = spi->spi_rbase;
|
|
spi->spi_tbptr = spi->spi_tbase;
|
|
|
|
/* 4 */
|
|
/* Init SPI Tx + Rx Parameters */
|
|
while (cp->cp_cpcr & CPM_CR_FLG)
|
|
;
|
|
cp->cp_cpcr = mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK,
|
|
0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
|
|
while (cp->cp_cpcr & CPM_CR_FLG)
|
|
;
|
|
|
|
/* 6 */
|
|
/* Set to big endian. */
|
|
spi->spi_tfcr = CPMFCR_EB;
|
|
spi->spi_rfcr = CPMFCR_EB;
|
|
|
|
/* 7 */
|
|
/* Set maximum receive size. */
|
|
spi->spi_mrblr = MAX_BUFFER;
|
|
|
|
/* 8 + 9 */
|
|
/* tx and rx buffer descriptors */
|
|
tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
|
|
rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
|
|
|
|
tbdf->cbd_sc &= ~BD_SC_READY;
|
|
rbdf->cbd_sc &= ~BD_SC_EMPTY;
|
|
|
|
/* Set the bd's rx and tx buffer address pointers */
|
|
rbdf->cbd_bufaddr = (ulong) rxbuf;
|
|
tbdf->cbd_bufaddr = (ulong) txbuf;
|
|
|
|
/* 10 + 11 */
|
|
immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
|
|
immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
|
|
|
|
|
|
return;
|
|
}
|
|
|
|
/* **************************************************************************
|
|
*
|
|
* Function: spi_init_r
|
|
*
|
|
* Description: Init SPI-Controller (RAM part) -
|
|
* The malloc engine is ready and we can move our buffers to
|
|
* normal RAM
|
|
*
|
|
* return: ---
|
|
*
|
|
* *********************************************************************** */
|
|
void spi_init_r (void)
|
|
{
|
|
volatile spi_t *spi;
|
|
volatile immap_t *immr;
|
|
volatile cpm8260_t *cp;
|
|
volatile cbd_t *tbdf, *rbdf;
|
|
|
|
immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
cp = (cpm8260_t *) &immr->im_cpm;
|
|
|
|
spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
|
|
|
|
/* tx and rx buffer descriptors */
|
|
tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
|
|
rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
|
|
|
|
/* Allocate memory for RX and TX buffers */
|
|
rxbuf = (uchar *) malloc (MAX_BUFFER);
|
|
txbuf = (uchar *) malloc (MAX_BUFFER);
|
|
|
|
rbdf->cbd_bufaddr = (ulong) rxbuf;
|
|
tbdf->cbd_bufaddr = (ulong) txbuf;
|
|
|
|
return;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Function: spi_write
|
|
**************************************************************************** */
|
|
ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
|
|
{
|
|
int i;
|
|
|
|
memset(rxbuf, 0, MAX_BUFFER);
|
|
memset(txbuf, 0, MAX_BUFFER);
|
|
*txbuf = SPI_EEPROM_WREN; /* write enable */
|
|
spi_xfer(1);
|
|
memcpy(txbuf, addr, alen);
|
|
*txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
|
|
memcpy(alen + txbuf, buffer, len);
|
|
spi_xfer(alen + len);
|
|
/* ignore received data */
|
|
for (i = 0; i < 1000; i++) {
|
|
*txbuf = SPI_EEPROM_RDSR; /* read status */
|
|
txbuf[1] = 0;
|
|
spi_xfer(2);
|
|
if (!(rxbuf[1] & 1)) {
|
|
break;
|
|
}
|
|
udelay(1000);
|
|
}
|
|
if (i >= 1000) {
|
|
printf ("*** spi_write: Time out while writing!\n");
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Function: spi_read
|
|
**************************************************************************** */
|
|
ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
|
|
{
|
|
memset(rxbuf, 0, MAX_BUFFER);
|
|
memset(txbuf, 0, MAX_BUFFER);
|
|
memcpy(txbuf, addr, alen);
|
|
*txbuf = SPI_EEPROM_READ; /* READ memory array */
|
|
|
|
/*
|
|
* There is a bug in 860T (?) that cuts the last byte of input
|
|
* if we're reading into DPRAM. The solution we choose here is
|
|
* to always read len+1 bytes (we have one extra byte at the
|
|
* end of the buffer).
|
|
*/
|
|
spi_xfer(alen + len + 1);
|
|
memcpy(buffer, alen + rxbuf, len);
|
|
|
|
return len;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Function: spi_xfer
|
|
**************************************************************************** */
|
|
ssize_t spi_xfer (size_t count)
|
|
{
|
|
volatile immap_t *immr;
|
|
volatile cpm8260_t *cp;
|
|
volatile spi_t *spi;
|
|
cbd_t *tbdf, *rbdf;
|
|
int tm;
|
|
|
|
DPRINT (("*** spi_xfer entered ***\n"));
|
|
|
|
immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
cp = (cpm8260_t *) &immr->im_cpm;
|
|
|
|
spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
|
|
|
|
tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
|
|
rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
|
|
|
|
/* Board-specific: Set CS for device (ATC EEPROM) */
|
|
immr->im_ioport.iop_pdatd &= ~0x00080000;
|
|
|
|
/* Setting tx bd status and data length */
|
|
tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
|
|
tbdf->cbd_datlen = count;
|
|
|
|
DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
|
|
tbdf->cbd_datlen));
|
|
|
|
/* Setting rx bd status and data length */
|
|
rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
|
|
rbdf->cbd_datlen = 0; /* rx length has no significance */
|
|
|
|
immr->im_spi.spi_spmode = SPMODE_REV |
|
|
SPMODE_MSTR |
|
|
SPMODE_EN |
|
|
SPMODE_LEN(8) | /* 8 Bits per char */
|
|
SPMODE_PM(0x8) ; /* medium speed */
|
|
immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
|
|
immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
|
|
|
|
/* start spi transfer */
|
|
DPRINT (("*** spi_xfer: Performing transfer ...\n"));
|
|
immr->im_spi.spi_spcom |= SPI_STR; /* Start transmit */
|
|
|
|
/* --------------------------------
|
|
* Wait for SPI transmit to get out
|
|
* or time out (1 second = 1000 ms)
|
|
* -------------------------------- */
|
|
for (tm=0; tm<1000; ++tm) {
|
|
if (immr->im_spi.spi_spie & SPI_TXB) { /* Tx Buffer Empty */
|
|
DPRINT (("*** spi_xfer: Tx buffer empty\n"));
|
|
break;
|
|
}
|
|
if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
|
|
DPRINT (("*** spi_xfer: Tx BD done\n"));
|
|
break;
|
|
}
|
|
udelay (1000);
|
|
}
|
|
if (tm >= 1000) {
|
|
printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
|
|
}
|
|
DPRINT (("*** spi_xfer: ... transfer ended\n"));
|
|
|
|
#ifdef DEBUG
|
|
printf ("\nspi_xfer: txbuf after xfer\n");
|
|
memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
|
|
printf ("spi_xfer: rxbuf after xfer\n");
|
|
memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
|
|
printf ("\n");
|
|
#endif
|
|
|
|
/* Clear CS for device */
|
|
immr->im_ioport.iop_pdatd |= 0x00080000;
|
|
|
|
return count;
|
|
}
|
|
#endif /* CONFIG_SPI */
|
|
|