upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
992 B
992 B
The config option CONFIG_SILENT_CONSOLE can be used to quiet messages
on the console. If the option has been enabled, the output can be
silenced by setting the environment variable "silent". The variable
is latched into the global data at an early stage in the boot process
so deleting it with "setenv" will not take effect until the system is
restarted.
The following actions are taken if "silent" is set at boot time:
- Until the console devices have been initialized, output has to be
suppressed by testing for the flag "GD_FLG_SILENT" in "gd->flags".
- When the console devices have been initialized, "stdout" and
"stderr" are set to "nulldev", so subsequent messages are
suppressed automatically. Make sure to enable "nulldev" by
#defining CONFIG_SYS_DEVICE_NULLDEV in your board config file.
- When booting a linux kernel, the "bootargs" are fixed up so that
the argument "console=" will be in the command line, no matter how
it was set in "bootargs" before.